Академический Документы
Профессиональный Документы
Культура Документы
S.N.93.02
=============================================================================================
6
Address: 8 Chunyang Rd (E), Fangqian, New Dist. Wuxi, P.R.China
Tel. +86-510-88275668 Fax. +86-510-88275118
E-mail: wxjianyi@public1.wx.js.cn Http://www.wxjy.com
1. Application
The grinder used for grinding cement clinker and ore is one of main equipments of laboratories.
2. Specifications
Disc diameter:
175mm
Material size:
4mm
0.15mm
25kg/h
900r/min
Y90S4
AC415V 1.1kW
600360610 mm
150kg
4. Installation
4.1 The grinder can be handled by manpower.
4.2 The grinder should be installed on the concrete base with 4 foundation bolts M10160, (see
figure 1) and the bolts should be 25mm above the ground.
4.3 It is necessary to connect the grinder with power supply by users through the hole behind the
machine and the grinder should be grounded reliably.
tightened, if necessary.
5.2 Operation. First remove the plug on the disc cover, loosen the nuts (2) and the hand wheel
(1), check that the two discs shouldnt be close, then lock the nut I, place the plug into
position and feed the material into the grinder, turn on the grinder. The outlet particle size
can be adjusted by turning the hand wheel. Care must be taken that the nuts I, II should be
tightened during operation, switch off the grinder to get out ground material from drop bin
(20). Clear out the grinder if some other samples will be grounded.
5.3 Maintenance
Open the upper case of the grinder; lock out two screws (5), (10) to fill the lubricating oil,
then screw on two screws. Take care that the two screws should not be closer to the bearing
sleeve, otherwise, the bearing sleeve will not moved freely. Cover the upper case. If it is
necessary to replace disc (13), remove three locking screws with the spanner.
Foundation
Size
=============================================================================================
8
Address: 8 Chunyang Rd (E), Fangqian, New Dist. Wuxi, P.R.China
Tel. +86-510-88275668 Fax. +86-510-88275118
E-mail: wxjianyi@public1.wx.js.cn Http://www.wxjy.com
Schematic Drawing
1.adjustable hand wheel
2.nut I 3.retaining ring
4.bearing seat I
5.screw I
6.bearing 7.bearing sleeve I 8.spring 9.belt pulley 10.screw II 11.sealing plug
12.bearing 13.rotary mill
14.fixed mill 15.removable mill cover 16.nut II
17.grinder seat
18.shaft
19.bearing sleeve II 20.drop bin 21.front cover
22.frame
=============================================================================================
9
Address: 8 Chunyang Rd (E), Fangqian, New Dist. Wuxi, P.R.China
Tel. +86-510-88275668 Fax. +86-510-88275118
E-mail: wxjianyi@public1.wx.js.cn Http://www.wxjy.com