Академический Документы
Профессиональный Документы
Культура Документы
RP Series
GMS44PX6/S
— Generator Set Specification
NO: DT1215012- 02
Page - 1 - of 5
GMS44PX6/S
3-Phase, 60Hz@1800RPM
kVA 55
Standby Power
kW 44
kVA 50
Prime Power
kW 40
Voltage V 480/277
480V 60.1
Ampere (A)
208V 138.8
Fuel Tank 8 hours (Standard) 102
Capability (L) 24 hours (Optional) 308
Noise Level at 7 Open Type 91.9
meters (dBA) Silent Type 66.9
Notes:
1) Ambient reference conditions: 1,000 mbar, 27 , 30% relative humidity;
2) Also available in the following voltages: 440/254V-416/240V-220/127V-208-120V;
3) ESP (Standby Power): the maximum power available under varying loads. Only for standby and emergency use. No overload is permissible.
PRP (Prime Power): the maximum power available under varying loads for continuous operation. A 10% overload is permissible for 1 hour
every 12 hours.
Features Benefits
z Tightly structure, excellent design and craft z Function stability credibility, service convenience
z High durability at maximum performance z Low operating cost results in optimal economy
z Excellent cooling system, reliable operation under z Gets the job done wherever you are
harshest conditions z Maximum economy through minimum downtime
z Designed with safety in mind z Operation, and maintenance
z Earth leakage protection
z Quick fix electrical power connections
Page - 2 - of 5
GMS44PX6/S
Page - 3 - of 5
GMS44PX6/S
Control System
PLC-702HC
PLC-702HC key manual start module is a manual engine control module
designed to control the engine via a key switch and push buttons on the front
panel. The module is used to start and stop the engine and indicate fault
conditions, automatically shutting down the engine and giving a true first up
fault condition of an engine failure.
Standard Control Function
● Manual Engine Control Module ● Over speed Protection
● Low Oil Pressure ● Protection hold-off timer
● High Engine Temperature ● Charge Failure warning
● Auxiliary Shutdown
PLC-5220
z Microprocessor control, with high stability and credibility
z Mains supply and generator operation monitoring
z Indicating operation status and fault conditions
z Multiple protections; multiple parameters display, like pressure, temp.
z Manual and automatic work mode selectable
z Real time clock for time and date display, overall runtime display, 99
log entries
z Overall power output display
z Integral speed/frequency detecting, telling status of start, rated
operation, over speed
z Communication with PC via RS485 OR RS232 interface, using
MODBUS protocol.
PLC-1F
Engine Control Generator Protection(ANSI)
● Start preparation (preheating or pre ● Over-/under voltage
lubrication) ● Over-/under frequency
● Start/stop sequences with selectable ● Over current
number of start attempts ● Reverse power
● voltage unbalance
● Fuel solenoid selection (coil type)
● phase sequence error
● Idle speed control
● Local of remote start/stop Clear Text Display
● Stop sequence with cooling down ● 128 x 64 pixel backlight STN
● Running speed detection selectable ● Graphic symbol messaging
O Generator Hz/V ● Clear text alarm messages
O Charger alternator input (W ● Clear text diagnostics for both Generator Monitoring
terminal) hardwired inputs and CANbus ● 3-phase or single phase generator
O Binary input (D+) messages (J1939) monitoring
O Oil pressure ● Log book holding 150 log entries O Voltage /current /frequency /power
● Real time clock for time and date /reactive power
Page - 4 - of 5
GMS44PX6/S
Optional
Lubricating
Exhaust System Cooling System Control Panel Voltages
System
● Oil with the ● Protection board from hotness ● Front heat protection ● Remote control panel ● 440/254V
machine ● Low frequency silencer ● 50℃ radiator ● Automatic paralleling ● 416/240V
● Coolant (-30OC) control panel ● 220/127V
● Automatic Transfer ● 208-120V
Switch (ATS)
Local Distributor
Specification may change without prior notice.
For more info., please contact your local distributors.
Page - 5 - of 5