Академический Документы
Профессиональный Документы
Культура Документы
1565
Bittiness
Description:
Cause:
Remedy:
Wait until paint is dry then abrade to remove all surface imperfections
and re-apply the finish coat.
Ensure that all dust and dirt is removed prior to painting and do not
paint in conditions where there is excessive dust in the air.
Bleeding
Description:
Cause:
Painting over reversible coatings, i.e. bituminous and coal tar coatings,
with non-tar coatings, without first applying a barrier coat. It is caused
by the solvent in the fresh paint re-wetting the underlying coating.
Remedy:
The information in this data sheet is to the best of our knowledge correct at the date of printing.
The company reserves the right to modify data without notice. The issue of a new data sheet will normally follow any change in data. The user should check the date of this sheet and if more
than 12 months have elapsed, then the data should only be used after checking with our nearest sales office to establish that they are still valid. Since condition of application and service may be
beyond our control, no liability can be accepted on the basis of this data.