for mitre cuts to both sides Model Concept 250 GT/H
with hydraulic sawbow feed for 90- 45- and 30 cu t. Similar execution: Concept 265 GT/H For cutting of tubes, profiles of steel, cast iron as well as light and non-ferrous metals and similar materials. Standard equipment: - solid substructure with big sized chip collecting tray with feet for easy transport - hydraulic sawfeed with infinitely variable regulation - easy adjustment to mitre cuts +/- 45 and 30 - favourable clamping for cutting angle - very robust sawbow, with 14 mm base plate, sturdy bearing - big sized sawband wheels 340 mm diam., driven wheel with taper bush, idle wheel with inclination facility - sawbow inclined by 20, thus increase of sawband lifetime - completely closed turntable with scale, with ball bearing - reinforced material clamping jaws of steel, with mechanic quick-acting adjustment and excentric clamping - 2 sturdy cast-iron guide arms, guided at dove-tail rail - carbide tipped guide jaws with thrust bearing for a precise cut - easy sawband change by front access of wheel protection door - coolant tank extricable with electric coolant pump - material length stop 0 - 600 mm, usable on both sides - sawband driven chip brush - emergency stop push button, connecting cable and plug CEE 16 A - 1 bimetal sawband - 1 set servicing tools - 1 operating instruction Execution of machine according to prevailing CE directives Colour: blue/light grey acc. to RAL 5015/7035 Technical Data: Cutting range round square flat Saw motor Coolant pump Sawband speed Sawband dim. Coolant tank Mat. support height Shipping dim. Net weight