Академический Документы
Профессиональный Документы
Культура Документы
Integrated Circuit
TTL BCDtoSevenSegment Decoder/Driver
with Open Collector Outputs
Description:
The NTE7447 is a BCDtoSevenSegment Decoder/Driver in a 16Lead plastic DIP type package
that features activelow outputs designed for driving commonanode VLEDs or incandescent indicators
directly. This device has full rippleblanking input/output controls and a lamp test input. Display patterns
for BCD input count above 9 are unique symbols to authenticate input conditions.
The NTE7447 incorporates automatic leading and/or trailingedge zeroblanking control (RBI and
RBO). Lamp test (LT) may be performed at any time when the BI/RBO node is set at a high level. This
device also contains an overriding blanking input (BI) which can be used to control the lamp intensity
by pulsing or to inhibit the outputs. Inputs and outputs are entirely compatible for use with TTL logic
outputs.
Features:
D OpenCollector Outputs Drive Indicators Directly
D Lamp Test Provision
D Leading/Trailing Zero Suppression
Absolute Maximum Ratings: (Note 1)
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5V
Current Forced Into Any Output in the OffState . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1mA
Operating Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to +70C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65C to +150C
Note 1. Unless otherwise specified, all voltages are referenced to GND.
Recommended Operating Conditions:
Parameter
Symbol
Min
Typ
Max
Unit
VCC
4.75
5.0
5.25
VO(off)
15
IO(on)
40
mA
IOH
200
IOL
mA
TA
+70
Supply Voltage
Symbol
Test Conditions
Min
Typ
Max
Unit
VIH
VIL
0.8
VIK
1.5
VOH
2.4
3.7
VOL
0.27
0.4
IO(off)
250
VO(on)
0.3
0.4
Input Current
Any Input except BI/RBO
II
mA
IIH
40
IIL
1.6
mA
4.0
mA
BI/RBO
ShortCircuit Output Current
BI/RBO
IOS
VCC = MAX
4.0
mA
Supply Current
ICC
64
103
mA
Note 2. .For conditions shown as MIN or MAX, use the appropriate value specified under Recommended
Operation Conditions.
Note 3. All typical values are at VCC = 5V, TA = +25C.
Note 4. ICC is measured with all outputs open and all inputs at 4.5V.
Switching Characteristics: (VCC = 5V, TA = +25C unless otherwise specified)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Unit
100
ns
toff
ton
100
ns
toff
100
ns
ton
100
ns
RL = 120, CL = 15pF
Function Table:
Decimal
or
Function
0
LT
RBI
Inputs
BI/RBO
Outputs
(NOTE)
ON
ON
ON
ON
ON
ON
OFF
OFF
ON
ON
OFF
OFF
OFF
OFF
ON
ON
OFF
ON
ON
OFF
ON
ON
ON
ON
ON
OFF
OFF
ON
OFF
ON
ON
OFF
OFF
ON
ON
ON
OFF
ON
ON
OFF
ON
ON
OFF
OFF
ON
ON
ON
ON
ON
ON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
OFF
OFF
ON
ON
10
OFF
OFF
OFF
ON
ON
OFF
ON
11
OFF
OFF
ON
ON
OFF
OFF
ON
12
OFF
ON
OFF
OFF
OFF
ON
ON
13
ON
OFF
OFF
ON
OFF
ON
ON
14
OFF
OFF
OFF
ON
ON
ON
ON
15
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Notes
BI
OFF
OFF
OFF
OFF
OFF
OFF
OFF
RBI
OFF
OFF
OFF
OFF
OFF
OFF
OFF
LT
ON
ON
ON
ON
ON
ON
ON
H = HIGH Level
L = LOW Level
X = Irrelevant
NOTE: BI/RBO is wireAND logic serving as blanking input (BI) and/or rippleblanking output (RBO).
Note 1. The blanking input (BI) must be open or held at a high logic level when output functions
0 through 15 are desired. The rippleblanking input (RBI) must be open or high if blanking
of a decimal zero is not desired.
Note 2. When a low logic level is applied directly to the blanking input (BI), all segment outputs are
off regardless of the level of any other input.
Note 3. When rippleblanking input (RBI) and inputs A, B, C, and D are at a low level with the lamp
test input high, all segment outputs go off and the rippleblanking output (RBO) goes to a
low level (response condition).
Note 4. When the blanking input/ripple blanking output (BI/RBO) is open or held high and a low is
applied to the lamptest input, all segment outputs are on.
B 1
16 VCC
C 2
LT 3
15 f
14 g
BI/RBO 4
13 a
RBI 5
12 b
D 6
11 c
A 7
10 d
GND 8
9 e
16
.260 (6.6)
Max
.200
(5.08)
Max
.100 (2.54)
.700 (17.78)