Академический Документы
Профессиональный Документы
Культура Документы
SRP
Dibuat oleh:
Nama
NIM
: 124.12.010
Dosen
: Aznaldi Augustia
Tanggal
: 13 JUNI 2015
JAWAB :
1. Assuming volumetric efficiency of 0.8, the required pump displacement is
(500)/(0.8) = 625 bbl/day
2. Based on welldepth 4500 ft and pump displacement 625 bbl/day, Fig 12.8
suggest API 320 unit with 84 in. stroke, that is, a pump is selected with the
following designation:
C-320D-213-86
3. Table 12.4 g suggest the following: Tubing size : 2-1/2 in OD, 2.259 in ID
Plunger size : 2 in Rod size : 7/8 in Pumping speed : 18 stroke/min
4. Table 12.1 gives d1 = 96.05 in., d2 = 111 in., c = 37 in., and h = 114., thus c/h
= 0.3246. The spreadsheet program. suckerrodPumpingflowrate&power.xls
gives Qo = 532 stb/d > 500 bbl/d Ppm = 31.5 hp
5. Cross sectional are of the 7/8 in rod is 0.6 in 2. Thus the maximum possible
stress in the sucker rod is
max =
13,645
=22,741.7<30,000 psi
0.6
Therefore, the selected pumping unit and rod meet well load and volume
requirement.
JAWAB :
550 bbl/day
=687.5 bbl/day
0.8
Based on well depth 4,000 ft and pump displacement 687.5 bbl/day, Fig 12.8
suggest API pump size 320 unit with 84 in stroke, that is, a pump is selected with
the following designation : C-320D-213-86
1
:2 2
Plunger size
1
:2 4
in.
Rod size
7 3
: 1, 8 , 4
Pumping speed
17+
2117
=19 spm
2
qo
Ppm
Sehingga didapat :
PRLmax = 17,265 lb
PRLmin = 5,204 lb
T
= 11,234 lb
max
Therefore, the selected pumping unit and rod meet well load and volume requirements.