Академический Документы
Профессиональный Документы
Культура Документы
Faculty of Engineering
King Abdulaziz University
Jeddah, Kingdom of Saudi Arabia
ChE 334
ChE 390
ChE 400
ChE 411
ChE 412
ChE 413
ChE 414
ChE 422
ChE 435
ChE 441
ChE 442
ChE 451
ChE 452
ChE 462
ChE 463
ChE 464
ChE 465
ChE 466
ChE 471
ChE 499
Separation Processes
Summer Training
Cooperative Work
Polymer Engineering
Engineering Materials
Materials selection
Extractive Metallurgy
Catalysis
Unit Operations Laboratory
Modeling and Simulation
Process Control
Plant Design
Computer Aided Design for Chemical Engineering
Petroleum Refinery Engineering
Natural Gas Engineering
Petrochemical Technology
Industrial Pollution Control
Safety in Chemical Engineering
Special Topics
Senior Project
Course Title
Core
Elective
Optional
ENGLISH
CODE/NO
ARABIC
CODE/NO
ChE 201
201
CHEM 281, IE 200
Required or Elective:
A pre-requisite for:
Th.
CREDITS
Pr. Tr. Total
Required
ChE 331
Catalogue Description:
Broad definitions of Chemical Engineering.
Introduction to chemical engineering
calculations. Material balances in processes not involving chemical reactions/involving
chemical reactions. Recycle, by-pass and purge calculations. Critical properties and
compressibility charts. Vapor-liquid equilibria, partial saturation and humidity. Computer
applications.
Textbooks:
Hammelblau D. M. and Riggs J. B., Basic Principles and Calculations in Chemical
Engineering, 8th Edition Prentice Hall, (2012)
U
Supplemental Materials:
Ref Ritchard M. Felder, Ronald W. Rousaou, Elementary Principles of Chemical Processes,
.
3rd Edition, John Wiley, (2005)
Ritchard M. Felder, Ronald W. Rousaou, Elementary Principles of Chemical Processes,
Student workbook, 3rd Edition, John Wiley, (2005)
U
Topics to be Covered:
1.
Basic concept
Duration in Weeks
U
1
2
2.
3.
Material balances
Introduction
1
2
1
1
2
2
1
2
COURSE TITLE
ARABIC
CODE/NO
ChE 210
210
CHEM 281
Required or Elective:
A pre-requisite for:
Materials Sciences
Pre-requisites:
Course Role in Curriculum
Th.
Pr.
CREDITS
Tr.
Total
Required
ChE 311
Catalogue Description:
Classification of engineering materials, atomic and molecular bonding. Properties and
microstructure, elastic and plastic behavior. Order in solids, phases and solid- solutions,
crystal geometry. Disorder in solids, atomic movement and rearrangement, phase diagrams,
solid-state transformations. Applications of metals, ceramics, polymers, and composites.
Service stability, corrosion, and failure. Involves laboratory experiments and practices.
Textbooks:
1. Materials Science and Engineering by William D. Callister (Univ. of Utah), John Wiley
& Sons; 8th Edition (May 2013)
2. Elements of Materials Science & Engineering by L.H. Van Vlack (6th edition). Addison
- Wesley Pub.Co.Inc.1990
U
Supplemental Materials:
ASM Handbook 10th edition
U
Topics to be Covered:
1.
Introduction
2.
Bonding and Coordination
3.
Crystal Structures (Atomic Order)
U
Duration in Weeks
1
1
1
4.
5.
6.
7.
8.
9.
10.
11.
Crystallography
Atomic disorder in solids
Solid solutions
Deformation and fracture
Types of fracture
Shaping strengthening
Performance of materials in service
Phase equilibria
1
1
1
1
1
2
2
2
ENGLISH
CODE/NO
ARABIC
CODE/NO
ChE 301
301
CHEM 202
Required or Elective:
A pre-requisite for:
Th.
CREDITS
Pr. Tr. Total
--
Required
ChE 302
Catalogue Description:
Introduction to thermodynamics concepts, First law of thermodynamics, Mass and energy
balances in closed and open systems, volumetric properties of pure fluids, heat effects,
humidity charts, second law of thermodynamics, entropy, Computer applications to
thermodynamics problems.
Textbooks:
Smith J.M., Van Ness H.C., and Abott M. M., Introduction to Chemical Engineering
Thermodynamics, 8th edition, Mc.Graw-Hill, (2012)
U
Supplemental Materials:
J. R. Elliott and C. T. Lira, Introductory Chemical Engineering Thermodynamics, 2nd
edition, Prentice Hall PTR, 2nd Edition (2011)
U
Topics to be Covered:
1.
Fundamental principles of Thermodynamics
2.
First law of thermodynamics
3.
Properties of pure fluids
U
Duration in Weeks
2
2
4
U
4.
5.
6.
Heat effects
The second law of thermodynamics
Computer application in thermodynamic problems
2
3
1
ENGLISH
CODE/NO
ARABIC
CODE/NO
Th.
CREDITS
Pr. Tr. Total
--
Required
ChE 321, ChE
334
Catalogue Description:
Review of first and second law of thermodynamics.Thermodynamic properties of fluids.
Power cycles. Vapor/liquid equilibrium. Theory and application of solution thermodynamics
and chemical reaction equilibria.
Textbooks:
Smith J.M., Van Ness H.C., and Abott M. M., Introduction to Chemical Engineering
Thermodynamics, 8th edition, Mc.Graw-Hill, (2012)
U
Supplemental Materials:
J. R. Elliott and C. T. Lira, Introductory Chemical Engineering Thermodynamics, 2nd
edition, Prentice Hall PTR, 2nd Edition (2011)
U
Topics to be Covered:
1.
Revision of first and second law of thermodynamics
2.
Thermodynamic properties of fluids
3.
Production of power from heat
4.
Vapor/Liquid equilibrium
5.
Theory of thermodynamics solution
U
Duration in Weeks
1
4
4
3
2
U
ENGLISH
CODE/NO
ARABIC
CODE/NO
ChE311
311
CHEM 240, ChE210, EE251
Required or Elective:
A pre-requisite for:
Corrosion Engineering
Pre-requisites:
Course Role in Curriculum
Th.
CREDITS
Pr. Tr. Total
--
Required
--------------
Catalogue Description:
Electrochemical mechanisms, corrosion kinetics, polarization and corrosion rates, passivity.
Methods of testing corrosion of iron and steel and the effects of various parameters. Pourbaix
diagrams. Effect of stresses on corrosion, (stress corrosion cracking, cold working, hydrogen
cracking, etc.). Corrosion control technologies, corrosion of some engineering alloys. Design
of simple processes.
Textbooks:
Robert Winston RevieHerbert Henry UhligCorrosion and Corrosion Control, an
Introduction to Corrosion Science and Engineering, John Wiley & Sons; 4th Edition
(2008)
U
Supplemental Materials:
Volkan Cicek, Bayan Al-Numan,Corrosion Chemistry, John Wiley & Sons; (2011)
U
Topics to be Covered:
1.
Introduction to electrochemistry
2.
Prediction of the corrosion susceptibility of metals in different
mediums.
3.
Mechanism of electrochemical corrosion (types of galvanic cells
responsible for corrosion).
4.
Methods used for combating corrosion.
5.
Cathodic and anodic protection design methods.
6.
Selection of proper material suitable for corrosion protection.
7.
Design of equipment for different applications for corrosion
prevention.
U
10
Duration in Weeks
2
1
U
2
2
1
1
2
8.
11
ENGLISH
CODE/NO
ARABIC
CODE/NO
ChE 321
321
ChE 302, EE 332
Required or Elective:
Th.
3
CREDITS
Pr. Tr. Total
-1
3
A pre-requisite for:
Required
ChE441, ChE442,
ChE451, ChE499
Catalogue Description:
The course aims to develop the students ability to understand mole balances, conversion and
reactor sizing, rate laws and stoichiometry for a single and multiple reactors and its
applications to steady-state isothermal reactors. Collection and analysis of rate data of catalytic
reactors.
Textbooks:
H. Scott Fogler, Elements of Chemical Reaction Engineering, 4th Edition, Printice Hall
Intl., (2006)
U
Supplemental Materials:
M. Smith, "Chemical Engineering Kinetics, 3rd Edition, McGraw- Hill International
Book Company, Singapore, (2010)
U
Topics to be Covered:
1.
General Mole Balance Equation
2.
Conversion and reactor sizing
3.
Rate law an stoichiometry
4.
Steady state Isothermal Reactor Design for single reactions
5.
Collection and Analysis of Rate Data
6.
Reaction Yield and Selectivity
7.
Steady state Isothermal Reactor Design for multiple reactions
8.
Catalytic zed Reaction Mechanisms
U
12
Duration in Weeks
2
1
2
2
2
3
1
1
U
13
ENGLISH
CODE/NO
ARABIC
CODE/NO
Th.
CREDITS
Pr. Tr. Total
ChE 331
331
3
-1
3
MATH 203, MATH 204, ChE 201
Required or Elective:
Required
ChE 332, ChE
A pre-requisite for:
333
Momentum Transfer
Pre-requisites:
Course Role in Curriculum
Catalogue Description:
Fluid static, Mass, momentum, and energy balance on finite and differential systems. Laminar
and turbulent flow in pipes. Fluid flow in porous media. Introduction to boundary layer
theory. Fluid flow applications.
Textbooks:
Bruce R. Munson, Theodore H. Okiishi, Wade W. Huebsch and Alric P. Rothmayer,
Fluid Mechanics, n Wiley & Sons; 7th Edition (2013)
U
Supplemental Materials:
James Welty, Charles,Wicks, Gregory L. Rorrer, Robert E. Wilson, Fundamentals of
Momentum, Heat and Mass Transfer, Publisher: John Wiley & Sons; 5th Edition (2008)
U
Topics to be Covered:
1.
Introduction to Momentum Transfer
2.
Fluid Statics and Elementary Fluid Dynamics
3.
Finite Control Volume Analysis
4.
Differential Analysis of Fluid Flow
5.
Dimensional analysis, Similitude and Modeling
6.
Viscous Flow in Pipe
7.
Flow over Immersed Bodies
8.
Turbomachines
U
14
Duration in Weeks
2
2
4
1
2
1
1
1
U
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
Class Schedule:
Lecture: two 1.5 hour sessions per week
Tutorials: one 3.0 hours session per week
Dr. Belal Al-Zaitone
Instructor:
September 2013
Last updated :
15
ENGLISH
CODE/NO
ARABIC
CODE/NO
ChE 332
332
ChE 331
Required or Elective:
A pre-requisite for:
Heat Transfer
Pre-requisites:
Course Role in Curriculum
Th.
CREDITS
Pr. Tr. Total
--
Required
ChE 435
Catalogue Description:
Introduction, the threemodes of heat transfer , the derivation and application of general heat
conduction equation in three coordinates, , heat transfer from extended surfaces, unsteady
state conduction and convection, convection across different geometry, internal flow in
circular and non- circular conduits, free convection heat transfer, boiling and condensation,
heat exchangers.
Textbooks:
Frank P. Incropera, David P. DeWitt,Theodore L. Bergman, Adrienne S. Lavine,
Fundamental of Heat and Mass Transfer Publisher: John Wiley & Sons; 6th Edition,
(March 2012)
U
Supplemental Materials:
Yunus A. Cengel, Afshin Ghajar, Heat and Mass Transfer: Fundamental and
Applications, Publisher: McGraw-Hill, 4th Edition (2010)
U
Topics to be Covered:
1.
Introduction
2.
General heat conduction equation
3.
Steady-state conductions
4.
Heat transfer from extended surfaces
5.
Transient Conduction
6.
External flow convection heat transfer
7.
Internal flow convection heat transfer
8.
Free convection heat transfer
9.
Boiling and condensation
10. Heat exchangers and design oriented problems
U
16
Duration in Weeks
0.5
0.5
1.5
1.5
1.5
1.5
1.5
1.5
2
2
U
17
ENGLISH
CODE/NO
ARABIC
CODE/NO
ChE 333
333
ChE 331
Required or Elective:
A pre-requisite for:
Mass Transfer
Pre-requisites:
Course Role in Curriculum
Th.
CREDITS
Pr. Tr. Total
--
Required
ChE 334
Catalogue Description:
Fundamentals of mass transfer processes. The control volume approach to the mass transfer
processes differential equations of mass transfer. Steady and unsteadystate molecular
diffusion. Natural and forced convection mass transfer. Mass transfer theories. Convective
mass transfer correlations. Analysis of chemical engineering operations involving mass
transfer. Simultaneous heat and mass transfer; mass transfer accompanied by chemical
reaction.
Textbooks:
J.R.Welty, R.E.Wilson and C.E.Wicks, Fundamentals of Momentum, Heat and Mass
transfer. 5th Edition , John Wiley (2008)
U
Supplemental Materials:
Frank P. Incropera, David P. DeWitt, Theodore L. Bergman, Adrienne S. Lavine,
Fundamental of Heat and Mass Transfer,Publisher: John Wiley & Sons; 6th Edition,
(2012)
U
18
Topics to be Covered:
1.
2.
3.
4.
5.
6.
7.
Duration
Weeks
1
2
2
3
2
2
2
19
in
ENGLISH
CODE/NO
ARABIC
CODE/NO
ChE 334
334
ChE 302, ChE 333
Required or Elective:
Th.
Separation Processes
Pre-requisites:
Course Role in Curriculum
CREDITS
Pr. Tr. Total
A pre-requisite for:
Required
ChE 390, ChE
435
Catalogue Description:
Phase equilibrium, continuous contact and stage wise processes; fractional distillation, gas
absorption, liquid-liquid extraction and other separation processes
Textbooks:
J. D. Seader, and Ernest J. Henley, Separation Process Principles, 3rd Edition John
Wiley & Sons; (2013)
U
Supplemental Materials:
J. M. Coulson, J. F. Richardson and J. H. Harker, Chemical Engineering, volume 2,
Particle Technology and Separation Processes, Publisher: Butter Heinemann, 5th
edition (2002)
U
Topics to be Covered:
1.
General separation Techniques
2.
Phase equilibrium and phase diagrams
3.
Equilibrium stages and flash distillation
4.
Staged binary distillation: McCabe-Thiele
U
Duration in Weeks
1
2
2
4
20
5.
6.
Liquid-liquid extraction
Absorption and stripping
3
2
21
ENGLISH
CODE/NO
ARABIC
CODE/NO
Summer Training
Pre-requisites:
ChE 390
390
ChE 334
Required or Elective:
A pre-requisite for:
Th.
CREDITS
Pr. Tr. Total
Required
Catalogue Description:
10 weeks of training in industry under the supervision of a faculty member. Students have to
submit a report about their achievements during training in addition to any other requirements
assigned by the Department
Textbooks:
None
U
Supplemental Materials:
None
U
Topics to be Covered:
Duration in Weeks
1.
Acquainting the trainee by the company, its work environment,
2
organizational structure, products, costumers, engineering units,
and quality system
U
22
2.
3.
4.
23
ENGLISH
CODE/NO
ARABIC
CODE/NO
ChE 400
400
ChE 334
Required or Elective:
A pre-requisite for:
Cooperative Work
Pre-requisites:
Course Role in Curriculum
Th.
CREDITS
Pr. Tr. Total
8
Required
Catalogue Description:
Extensive 26 weeks of supervised hands-on work experience at a recognized firm in a
capacity which ensures that the student applies his engineering knowledge and acquires
professional experience in his field of study at KAU. The student is required to
communicate, clearly and concisely, training details and gained experience both orally and in
writing. The student is evaluated based on his abilities to perform professionally, demonstrate
technical competence, work efficiently, and to remain business focused, quality oriented, and
committed to personal professional development.
Textbooks:
None
U
Supplemental Materials:
None
U
24
Duration
Weeks
Acquainting the trainee by the company, its work environment,
2
organizational structure, products, costumers, engineering units,
and quality system
Familiarizing the trainee of one production or design unit with
2
deep understanding of the work environment, regulations,
standards, etc...
Allocating the trainee to a project team and allowing him to study
2
and collect
necessary data about the project using internal
and external data sources.
Working as a team member to execute assigned tasks with the
20
following objectives:
Topics to be Covered:
1.
2.
3.
4.
in
25
COURSE TITLE
ARABIC
CODE/NO
ChE 411
411
CHEM 232
Required or Elective:
A pre-requisite for:
Polymer Engineering
Pre-requisites:
Course Role in Curriculum
Th.
3
Pr.
3
CREDITS
Tr.
Total
3
Elective
Catalogue Description:
Classification of polymeric materials, calculation of molar mass and molar mass distribution,
polymerization reactions, kinetics of polymerization reactions, composites materials, polymer
processing, mechanical and physical properties, commercial polymer.
Textbooks:
U
Robert J. Young, P A Lovell, Introduction to polymers, 3rd Edition, Chapman & Hall
Publishers, (2008)
Supplemental Materials:
Ref. Powel P.C, Engineering with polymers, 1st Edition, Chapman & Hall Publishers, 1992
U
Topics to be Covered:
U
1.
2.
3.
4.
5.
6.
7.
8.
9.
Duration
Weeks
1
1
2
2
1
2
1
2
2
U
Polymer Chemistry.
Molar mass and degree of polymerization.
Classification of polymerization reactions.
Kinetics of step polymerization reaction.
Stereochemistry of polymerization
Reinforced polymer.
Reinforced plastic
Fibrous reinforcement
Forming of reinforcement plastic
26
in
27
COURSE TITLE
ARABIC
CODE/NO
ChE 412
412
ChE 210
Required or Elective:
A pre-requisite for:
Engineering Materials
Pre-requisites:
Course Role in Curriculum
Th.
3
CREDITS
Pr. Tr. Total
1
-3
Elective
Catalogue Description:
Ferrous and non-ferrous metals and alloys. Ceramics. Polymers. Composites. Conductors,
semiconductors and superconductors. Glasses
Textbooks:
Michael F. Ashby, D, Jones, An Introduction to Properties, Applications and Design,
Third Edition, 2008
U
Supplemental Materials:
Ref.
Norman E. D, Mechanical Behavior of Materials, 3rd Edition, 2006
U
Topics to be Covered:
1.
Discovering the breadth of materials science.
2.
Learning the art of materials selection, combination and optimum
use in materials technology across a range of engineering
applications.
3.
Discovering the fundamental relationships between different
materials, the form they take and the jobs they perform.
4.
Exploring the physical and chemical properties of modern
materials and how they determine their application.
5.
Working on a team project.
6.
Improving skills in team building, communication, time
management, problem-solving, planning and presentation.
U
Duration in Weeks
2
3
U
2
3
3
2
28
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
Instructor:
Last updated :
29
ENGLISH
CODE/NO
ARABIC
CODE/NO
ChE 413
413
ChE 210
Required or Elective:
A pre-requisite for:
Materials selection
Pre-requisites:
Course Role in Curriculum
Th.
3
CREDITS
Pr. Tr. Total
1
-3
Elective
Catalogue Description:
Selection criteria for metals, alloys, ceramics and plastics. Mechanical behavior, corrosion
and oxidation resistance at ambient and elevated temperatures. Materials for marine
environments, oil production and transport, refineries, petrochemical and desalination
industries. Refractory materials. Computer applications, and economic considerations.
Textbooks:
Michael F. Ashby , Kara Johnson Materials and Design: The Art and Science of
Material Selection in Product Design, 2005
U
Supplemental Materials:
Ref. Mahmud M. F.,Materials Selection for Engineering Design: Structure, Properties and
Application, 1997
U
Duration
Weeks
Design considerations in the use of materials long-term materials
2
properties.
Quality control; selecting materials to optimize multiple
2
properties;
Materials failure
2
Materials behavior under extreme conditions; corrosion.
2
Discussion of design and materials selection strategy.
3
Process economics; life-cycle thinking and eco-design; special
3
topics.
Topics to be Covered:
U
1.
2.
3.
4.
5.
6.
30
in
31
COURSE TITLE
ARABIC
CODE/NO
ChE 414
414
ChE 210
Required or Elective:
A pre-requisite for:
Extractive Metallurgy
Pre-requisites:
Course Role in Curriculum
Th.
CREDITS
Pr. Tr. Total
--
Elective
Catalogue Description:
Major operations in the iron and steel-making industry; direct reduction processes, blast
furnaces, converter and electric-arc steel-making and steel refining methods; electro slag
(ESR) and vacuum induction refining (VIR). Bauxite production. Electro-thermal reduction
of cryolite to produce commercial aluminum. Production of TiO2. Extractive metallurgy of
titanium.Gold extraction. Continuous casting.
Textbooks:
Alan. C, An introduction to Metallurgy, 3rd Edition, Universities Press (India) Pvt.
Limited, 2000.
U
Supplemental Materials:
www.imetllc.com
U
Topics to be Covered:
Duration in Weeks
1.
Review of materials sciences
3
2.
Extractive metallurgy of iron and non-ferrous metals as Al, Ti
4
and Ag
3.
Heat treatment of carbon steel
3
4.
Standard testing of materials
4
U
32
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
Instructor:
Last updated :
33
COURSE TITLE
ARABIC
CODE/NO
ChE 422
422
ChE 321
Required or Elective:
A pre-requisite for:
Th.
3
Catalysis
Pre-requisites:
Course Role in Curriculum
CREDITS
Pr. Tr.
1
--
Total
3
Elective
Catalogue Description:
Kinetics of homogeneous and heterogeneous catalytic reactions. Physical and chemical
properties of solid catalysts. Preparation, activity, selectivity, deactivation and regeneration of
catalysts. Applications to refining and petrochemical industries.
Textbooks:
by Oleg N. Temkin, P. P. Pozdeev, Homogeneous Catalysis with Metal Complexes:
Kinetic Aspects and Mechanisms, John Wiley & Sons; (2013)
U
Supplemental Materials:
U
Topics to be Covered:
1.
Introduction
2.
Adsorption
3.
Allied phenomena on catalyst surface
4.
Design of catalytic reactors
5.
Preparation of solid catalysts
6.
Characterization of solid catalysts
7.
Catalyst deactivation
8.
Poisoning of catalysts
U
Duration in Weeks
1
2
2
2
2
2
2
1
34
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
Instructor:
Last updated :
35
ENGLISH
CODE/NO
ARABIC
CODE/NO
ChE 435
435
ChE 332, ChE 334
Required or Elective:
A pre-requisite for:
Th
.
CREDITS
Pr
Tr.
Total
.
Required
None
Catalogue Description:
Experimental study of unit operations using pilot size equipment. Safety considerations.
Data analysis. Selected topics related to unit operation such as membrane separation and
mechanical separation, etc.
Textbooks:
Warren McCabe, Juliana Smith, Peter Harriott, Unit Operations of Chemical
Engineering, Publisher: McGraw Hill, 7th Edition (2004)
U
Supplemental Materials:
Ref. J. M. Coulson, J. F. Richardson and J. H. Harker, Chemical Engineering, volume 2,
Particle Technology and Separation Processes, Publisher: Butter Heinemann, 5th
Edition (2002)
U
Topics to be Covered:
Duration in Weeks
1. Safety considerations
1
2. Planning a program of experiments to satisfy a particular
4
objective
3. Operation of pilot plant
4
4. Data analysis
2
5. Oral and written communications
2
6. Working in team
2
U
36
37
ENGLISH
CODE/NO
ARABIC
CODE/NO
ChE 441
441
ChE 321, ChE 334
Required or Elective:
A pre-requisite for:
Th.
CREDITS
Pr. Tr. Total
--
Required
None
Catalogue Description:
This course is designed to give a chemical engineering student the ability to solve system of
algebraic- differential equations. The course will develop student abilitys to drive system
models and simulate digitally. The student is also trained on available simulation computer
packages Design II, ChE-Cad & Math-lab).
Textbooks:
Luyben W. L., Process Modeling Simulation & Control, 2nd edtion, McGraw-Hill
(1990).
U
Supplemental Materials:
Norman W. Loney, Applied Mathematical Methods for Chemical Engineers, 2nd
edition, Taylor & Francis, 2007
U
Topics to be Covered:
1.
Introduction review numerical method
2.
Total mass balance
3.
Components mole balance
4.
Energy Balance
5.
System in series
U
Duration in Weeks
2
1
1
1
1
38
6.
7.
8.
9.
Distillation Column
CSTR & Distillation in series
Distributed parameter system
Closed loop system
2
2
2
2
39
COURSE TITLE
ARABIC
CODE/NO
CREDITS
Pr
Tr.
Total
.
Th
.
3
3
-ChE 442
442
ChE 321, ChE 334, MATH 205
Required or Elective:
Required
A pre-requisite for:
None
Process Control
Pre-requisites:
Course Role in Curriculum
Catalogue Description:
Mathematical modeling of process control. Transfer functions. Dynamic behavior of
chemical processes. Feedback control. Dynamic behavior of closed-loop systems. Stability
analysis. Frequency response analysis. Controller design and tuning. Introduction to
computer control. Laboratory and simulations applications.
Textbooks:
Donald R. Coughanower, Process Systems Analysis and Control, 2nd edition, McGraw
Hill, 2009
U
Supplemental Materials:
Ref.
G. Stephanopulos, Chemical Process Control , An introduction to theory and practice,
Prentice- Hall, 1990
Ref.
Seborg D. E., T. F. Edgar, and D. A. Mellichamp, Process Dynamics and
Control,John Wiley & Sons, New York, 1989
U
Topics to be Covered:
U
1.
2.
3.
4.
5.
6.
Duration
Weeks
2
3
3
2
2
2
U
40
in
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
Class Schedule:
Lecture: two 1.5 hour sessions per week
Lab.: one 3.0 hours session per week
Prof. Abdulrahim Al-Zahrani
Instructor:
January 2014
Last updated :
41
ENGLISH
CODE/NO
ARABIC
CODE/NO
Th.
CREDITS
Pr. Tr.
ChE 451
451
3
-1
ChE 321, ChE 334, IE 202
Required or Elective:
Required
A pre-requisite for:
None
Plant Design
Pre-requisites:
Course Role in Curriculum
Total
Catalogue Description:
Plant design considerations of chemical and petrochemical processes. Plant Locations and
layout. Plant safety and hazards. Analysis of cost estimation, Operability, controllability and
reliability of plant design. Materials handling and transport. Equipment design and
specifications. Utilization of simulation and design packages.
Textbooks:
M.S. Peter and K.D. Timmerhaus, Plant design and Economics for Chemical Engineers,
5th edition, Mc.Graw-Hill, 2004.
U
Supplemental Materials:
R. Turton, R. Bailie, W. Whiting, J. Shaeiwitz, Analysis, Synthesis, and design of
chemical processes, Printice Hall, PTR, 1st edition 1998,
J. M. Coulson, J. F. Richardson and R. K. Sinnott, Chemical Engineering, volume 6,
Pergamon Press, 1st edition 1983,
U
Topics to be Covered:
U
1.
2.
Duration
Weeks
3
U
1
1
1
in
3.
4.
5.
6.
Cost Estimation
Cash flow, Estimation of Capital Investment, Cost Indexes
Profitability, Alternative Investments and Replacements
Materials Handling, Equipment Design and Costs
Fluid Transport, Piping systems, Flow/Pressure and Power
Equipment Design
Reactor Design
Heat Transfer Equipment Design
Separation Equipment Design
Utilization of Simulation and design Packages
HYSYS program to generate process flow sheets
1
1
1
1
2
2
1
43
ENGLISH
CODE/NO
ARABIC
CODE/NO
Th.
ChE 452
452
CREDITS
Pr. Tr.
--
Total
Elective
Catalogue Description:
Techniques for computer aided design of chemical processing systems. Thermodynamic
property models and data bases. Introduction to linear and nonlinear programming. Design of
unit operations and chemical reactors. Flow sheeting. Process integration. Development of
algorithm. Case studies with extensive use of computer software.
Textbooks:
Seider W., Seader J. D., Lewin D., Process Design Principles: Synthesis, Analysis, and
Evaluation, John Wiley, 1999
U
Supplemental Materials:
None
U
Topics to be Covered:
1.
Introduction to computer-aided process design packages.
2.
Aspen Plus Graphical User Interface.
3.
Aspen Plus Basic Input.
4.
Unit Operations Models; Distillation, Reactors, Heat
Exchangers.
5.
Design Specification.
U
Duration in Weeks
2
3
2
3
U
44
(i)
(j)
(k)
Instructor:
Last updated :
45
COURSE TITLE
ARABIC
CODE/NO
ChE 462
462
ChE 321, ChE 334
Required or Elective:
A pre-requisite for:
Th.
CREDITS
Pr. Tr. Total
--
Required
None
Catalogue Description:
Oil production. Surface operations. Characterization and classification of crude oils. Physical
properties of oils. Refinery operations; atmospheric and vacuum distillation, treatment
processes, catalytic cracking, reforming, alkylation, coking, asphalt production and
lubricating oil production. Blending of refinery products. Waste treatment.
Textbooks:
Nelson, W.L., Petroleum Refining Engineering, McGraw Hill, 4th edition, New York,
1987
U
Supplemental Materials:
Ref. Garry, J. H. and Handwrek, G. E., Petroleum Refining, Technology and Economics,
2nd ed., 2000, Marcel-Dekker.
Ref. Rao, B.K.B., Modern Petroleum Refining Processes, 4th ed., Oxford, IBH, 2002
U
Duration
Weeks
Overview of the operations of a typical Refinery.
1
Petroleum products specification and their relevance to product perfor2
Topics to be Covered:
U
in
1.
2.
3.
4.
5.
mance.
Physical and chemical principles involved and how they are utilized in
these operations.
Major insights into the technology, economics and major trends of the
petroleum refining industry.
Detailed study of petroleum refinery processes and products
3
4
4
46
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
Class Schedule:
Lecture: three 1.0 hour sessions per week
Lab.: one 3.0 hours session per week
Dr. Hisham Bamufleh
Instructor:
January 2014
Last updated :
47
COURSE TITLE
ARABIC
CODE/NO
463
ChE 463
ChE 321, ChE 334
Required or Elective:
A pre-requisite for:
Th.
CREDITS
Pr. Tr. Total
--
Elective
None
Catalogue Description:
Characterization and properties of natural gas. Gas gathering systems. Gas-oil multistage
separation. Gas treatment and liquefaction. Gas transportation through pipelines, signaltelemetering Industrial usages.
Textbooks:
Xiuli.W & Michaels Advanced Natural Gas Engineering, 1st edition, Gulf publishing
Company, 2009
U
Supplemental Materials:
None
U
Topics to be Covered:
1.
Characterization and properties of natural gas.
2.
Gas-oil multistage separation.
3.
Treatment and liquefaction.
4.
Natural gas transportations
5.
Environmental regulations
U
Duration in Weeks
2
3
3
3
3
U
48
(h)
(i)
(j)
(k)
Instructor:
Last updated :
49
COURSE TITLE
ARABIC
CODE/NO
ChE 464
464
ChE 334
Required or Elective:
A pre-requisite for:
Th.
Petrochemical Technology
Pre-requisites:
Course Role in Curriculum
CREDITS
Pr. Tr. Total
--
Elective
None
Catalogue Description:
Production technologies of synthesis gas, olefins and aromatic. Manufacture of important
petrochemicals derived from base chemicals and synthesis gas. Production technologies of
important polymers and plastics.
Textbooks:
Hatch. L.F. & Matter. S. From Hydrocarbons to Petrochemicals, Gulf Publishing
Company, Houston, 1981
U
Supplemental Materials:
U
Topics to be Covered:
Duration in Weeks
1.
Production technologies of synthesis gas.
2
2.
Manufacture of important petrochemicals derived from base
6
chemicals and synthesis gas.
3.
Production technologies of important polymers and plastics.
6
U
50
(e)
(f)
(g)
(h)
(i)
(j)
(k)
Class Schedule:
Lecture: two 1.5 hour sessions per week
Lab.: one 3.0 hours session per week
Prof. Yahia Alhamed
Instructor:
January 2014
Last updated :
51
ENGLISH
CODE/NO
ARABIC
CODE/NO
ChE 465
465
ChE 321, ChE 334
Required or Elective:
A pre-requisite for:
Th.
CREDITS
Pr. Tr. Total
--
Elective
None
Catalogue Description:
Sources of pollution from chemical industries. Standards and legalization. Health and
environmental effects of pollution. Air pollutants; particulate, SOx, NOx, and organic vapors.
Air pollution control. Treatment of industrial wastewater. Handling of solid waste.
Monitoring of pollutants. Case studies for specific industries like petrochemicals, fertilizers,
desalination and petroleum refining.
Textbooks:
Howard S. Peavy, Donald R. Rove and George Tchobanoglous, ENVIRONMENTAL
ENGINEERING, 4th edition, McGraw-Hill, 2007
U
Supplemental Materials:
Ref.
Metcalf and Eddy, Waste Water Engineering (Treatment, Disposal, and Reuse), 3rd ed.
McGraw-Hill, 2005
U
Topics to be Covered:
1.
Introduction
2.
Water pollution control technologies
3.
Design of simple water treatment system
4.
Air pollution control technologies
5.
Solid and hazardous wastes
6.
Case studies for specific industries
U
Duration in Weeks
1
3
3
3
2
2
52
53
ENGLISH
CODE/NO
ARABIC
CODE/NO
ChE 466
466
ChE 334
Required or Elective:
A pre-requisite for:
Th.
3
CREDITS
Pr. Tr.
1
--
Total
3
Elective
None
Catalogue Description:
Safety and loss prevention. Major process hazards. Hazard identification, assessment and
prevention. Personal safety in industrial environment. Fire explosion and toxic release. Safety
systems.
Textbooks:
Roger L. Brauel, Safety and Health for Engineers, 2nd Edition, Wiley, 2006*.
*The latest available edition for the world reputable book on Process and Safety
Management
U
Supplemental Materials:
D. A. Crowl and J.F. Louvar Chemical Process Safety, 3rdedition 2011, Prentice Hall.
U
Topics to be Covered:
1.
Introduction to Chemical Process Safety
2.
Federal Process Safety Management Regulations
3.
Industrial Hygiene Principles
4.
Toxic Release and Dispersion Models
5.
Characteristics of Flammable and Explosive Materials
6.
Designs to Prevent Fires and Explosions
7.
Causes of Over-pressurization
8.
Introduction to Reliefs
9.
Relief Sizing
10. Hazard Identification Methodologies
11. Risk Assessment Methodologies
12. Accident Investigations
U
54
Duration in Weeks
1
2
1
1
1
2
1
1
1
1
1
1
U
55
COURSE TITLE
ARABIC
CODE/NO
ChE 471
471
ChE 334
Required or Elective:
A pre-requisite for:
Th.
Special Topics
Pre-requisites:
Course Role in Curriculum
CREDITS
Pr. Tr. Total
--
Elective
None
Catalogue Description:
Topics in chemical or materials engineering upon the approval of the Chemical Engineering
Department council.
Textbooks:
No formal text book. All materials are prepared by the instructor based on a large
collection of scientific papers and information and data. from NREL site
U
Supplemental Materials:
U
2.
requirements.
Access information from a variety of sources, and critically evaluate their quality, validity and
accuracy.
Plan an effective design strategy with manageable subtasks and timelines.
Develop and compare alternative solutions to select a baseline design.
Consider realistic constraints such as economic, environmental, social, manufacturability, and
sustainability.
Define the problem, identify customer needs, and transform the needs into design
requirements.
Accessinformation from a variety of sources, and critically evaluate their quality, validity and
accuracy.
Plan an effective design strategy with manageable subtasks and timelines.
Develop and compare alternative solutions to select a baseline design.
Considerr ealistic constraints such as economic, environmental, social, manufacturability, and
sustainability.
3.
4.
5.
U
6.
7.
8.
9.
10.
Topics to be Covered:
1.
Solar Energy System Design overview
2.
The Sun's Energy
3.
The Suns Position
4.
Collecting Solar Energy
5.
Solar Collectors
6.
Concentrator Optics
7.
Concentrating Collectors
8.
Modeling of System Performance
9.
Solar Thermal Projects
U
Duration in Weeks
1
1
2
2
2
1
1
2
2
56
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
Class Schedule:
Lecture: three 1.0 hour sessions per week
Lab.: one 3.0 hours session per week
Dr. Faisal Abdelhady
Instructor:
January 2014
Last updated :
57
ENGLISH
CODE/NO
ARABIC
CODE/NO
ChE 499
499
ChE 321, ChE 334
Required or Elective:
A pre-requisite for:
Th.
Senior Project
Pre-requisites:
Course Role in Curriculum
CREDITS
Pr. Tr. Total
--
Required
None
Catalogue Description:
Selection of topic, Literature review, Project design planning, Arranging for data collection
and experimental work, Interim report, Experimental work and data collection or field study
(if any), Data processing analysis and results, Preparation of a first draft of the final report,
Presentation of the project.
Textbooks:
U
Supplemental Materials:
Notes by: Dr. Bahattin k, A Guide to Engineering Design Methodologies and
Technical Presentation, KAU, Faculty of Engineering, Department of Electrical and
Computer Engineering, 2007
U
Topics to be Covered:
1.
Project selection and team formation
2.
Problem Definition
3.
Literature review and data collection
Problem formulation:
Knowledge integration
U
Duration in Weeks
1
2
3
3
58
2
1
1
8
3
2
59
Course Title
Engineering Communication Skills
Introduction to Engineering Design I
Introduction to Engineering Design II
Engineering Economy
Engineering Graphics
Basic Workshop
Structured Computer Programming
Numerical Methods in Engineering
Basic Electrical Engineering
60
Page No.
175
177
179
181
183
185
187
189
191
COURSE TITLE
Th.
200
IE 200
ELI 204
Required Course
CREDITS
Pr. Tr Total
.
10
(Required/Elective):
Catalogue Description:
Communication skills: art of listening, tools of in-depth reading, information gathering,
analyzing, and criticizing; electronic means of communication. Writing skills: writing
strategies, general versus technical writing, technical report writing. Presentation skills: use of
spoken English, professional computer-based oral presentations. Project-based course work on
technical communication.
TLSU Team (2012), Face to Face with Basic Research &
Communication: A Process & Project-Based Course.
1. Markel, Mike (2006), Technical Communication. (teacher
reference).
2. Woolever (2002), Writing for Technical Professions.
(teacher reference).
3. Svobodva et al. (2000), Writing in English: A Practical
Handbook for Scientific and Technical Writer. (teacher
reference).
Textbooks:
(Author, Title, Pub., year)
Supplemental Materials:
U
Topics to be Covered:
1. Orientation
2. Introduction to research and report writing
3. Research proposal
U
Duration in Weeks
1
1
1
61
4.
5.
6.
7.
8.
9.
10
11.
1
1
2
2
2
1
1
1
62
ENGLISH
CODE/NO
ARABIC
CODE/NO
.
CREDITS
Th.
Pr
.
6
Tr
.
-
Tota
l
3
IE 201
Introduction to Engineering Design I
201
ELI 104, COMM 101
Pre-requisites:
Required
Course Role in Curriculum
(Required/Elective):
Catalogue Description:
Introduction to active learning: team work, team dynamics, team norms and communication,
conducting effective meetings and quality assessment. Problem solving procedure: problem
definition, generation of solutions, selection methodology, solution implementation,
assessment of implementation. Levels of learning and degrees of internalization. Ethical
decision. Organization of the work and design notebook. Reverse engineering and design
projects.
1.STRATEGIES FOR CREATIVE PROBLEM SOLVING,
Textbooks:
(Author, Title, Pub., year)
Fogler, H.S., LeBlanc, S., E.,, 2th Ed., 2007, Prentice Hall
PTR ISBN 978-0130082794
2.INTRODUCTION TO ENGINEERING DESIGN, McNeill,
B. W., Bellamy, L., Burrows, V. A.,2004, King Abdulaziz
University Press
Supplemental Materials:
Course Learning Outcomes:
By the completion of the course the students should be able to:
1.
Develop and exhibit the behaviors associated with taking personal responsibility for
time management, classroom expectations, professional and ethical behaviors in the
class, and academic integrity, etc
2.
Practice elements of active learning as well as apply active learning techniques such
as Engineering Journal, Facilitator Signal, Process Check
3.
Explain quality, costumer, expectations, and process as well as demonstrate the ability
to meet customer expectations.
4.
Develop team norms.
5.
Use effective teams tools such as team agenda, minutes and team process check as
well as team dynamics tools such as maintenance phase.
6.
Use team discussion tools such as Boogle method, affinity process, deployment
flowchart, multi-voting and prioritization techniques.
7.
Explain problem solving strategies such as using heuristic, perceiving problems,
potential problem, real problem, etc.
8.
Explain problem definition techniques such as exploring the problem, present
state/desired state, Dunker diagram, statement restatement, KT Problem Analysis and
apply them on semester design project.
9.
Explain idea generation techniques such as Osborns Checklist, random stimulation,
fishbone diagram as well as apply them on semester project.
10. Explain situation analysis, problem analysis, decision analysis, potential problem
analysis and apply these techniques on semester design project.
11. Explain planning components such as Gantt chart, deployment chart and critical path
management and apply them on semester design project.
12. Explain ethical issues, safety considerations, and environmental, social and cultural
impact and evaluate them on semester design project.
U
63
13.
64
ENGLISH
CODE/NO
ARABIC
CODE/NO.
IE 202
202
IE 200, IE 201
Required Course
CREDITS
Th. Pr Tr. Total
.
(Required/Elective):
Catalogue Description:
Engineering design process. Hands-on real life and teambased engineering design
experience: Problem definition, Objectives & constraints, Functions & requirements,
Alternative designs, Evaluation and selection, Project management, Modeling, Analysis and
optimization, Prototyping, Testing, Design specs, Communicating design outcomes.
Clive L. Dym and Patrick Little, Engineering Design, a
Project-Based Introduction, Third Edition, John Wiley and
Sons, Inc., NJ, USA, 2009.
Course Notes: First day materials, Course project, Guide to
assignments
Textbooks:
(Author, Title, Pub., year)
U
Supplemental Materials:
U
65
Topics to be Covered:
1. Course Norms - Working within Multidisciplinary Teams
2. Introduction - The Design Process
3. Problem Definition
4. Objectives & Constraints
5. Functions & Requirements
6. Alternative Designs
7. Evaluation & Selection
8. Project Management
9. Modeling, Analysis, and Optimization
10 Prototyping
11. Testing
12. Design Specifications
13 Communication Skills
Duration in Weeks
1
1
1
1
1
1.5
1
1.5
1
1
1
1
1
66
CREDITS
ARABIC
CODE/NO. Th. Pr. Tr. Total
Engineering Economy
IE 255
255
Pre-requisites:
MATH 110
Required Course
COURSE TITLE
(Required/Elective):
Catalogue Description:
Fundamentals of engineering economy. Time value of money. Evaluation of alternatives.
Replacement and retention analysis. Break even analysis. Depreciation methods. Basics
of inflation.
Blank, Leland T. and Tarquin, Anthony J., Basics of
Engineering Economy, 1ST Ed., McGraw-Hill, 2008,
ISBN 9780071287623.
Course Notes in IE255 Coordinators web page:
Course outline, Course project, Homework, Old exams and
Booklets for formulas and tables.
Textbooks:
(Author, Title, Pub., year)
U
Supplemental Materials:
U
Topics to be Covered:
1. Foundations of Engineering Economy
2. How Time and Interest Affect Money
3. Nominal and Effective Interest Rate
4. Present Worth Analysis
5. Annual Worth Analysis
U
Duration in Weeks
1
2.5
2
2
1.5
67
6.
7.
8.
9.
10.
11.
12.
ROR Analysis
Benefit/Cost Analysis
Breakeven and Payback Analysis
Replacement Decisions
In1lation Impacts
Cos.5t Estimation
Depreciation
0.5
0.5
1
1
0.5
1
0.5
68
CREDITS
ENGLISH
ARABIC
CODE/NO CODE/NO. Th. Pr. Tr.
Total
MENG 102
102
1 5 3
Pre-requisites:
None
Required Course
Catalogue Description:
Introduction: Skills of freehand sketching. Methods of projection: orthographic, isometric.
Dimensioning of views. Third view prediction. Primary and successive auxiliary views.
Intersections of surfaces and bodies. Development of surfaces. Sectioning. Introduction to
assembly drawings. Steel sections. Standards and conventions. Computer Aided Graphics
using SOLIDWORK crafting package. Applications
Textbooks:
(Author, Title, Pub., year)
Supplemental Materials:
Duration in
Weeks
Topics to be Covered:
U
69
1.
2.
3.
4.
5.
6.
7.
8.
9.
10
.
1
1
2
2
3
1
1
1
1
1
70
ENGLISH
CODE/NO
MENG 130
MENG 102
CREDITS
ARABIC
CODE/NO. Th. Pr. Tr. Total
130
1 3
- 2
Required
(Required/Elective):
Textbooks:
(Author, Title, Pub., year)
Supplemental Materials:
U
71
72
ENGLISH
CODE/NO
CREDITS
Th. Pr. Tr. Total
ARABIC
CODE/NO.
EE 201
201
MATH 110, CPIT 100
Required Course
(Required/Elective):
Catalogue Description:
Introduction to computers. Algorithms and flowcharts. Solving engineering and
mathematical problems using a mathematically-oriented programming language.
Programming concepts: I/O, assignment, conditional loops, functions and subroutines.
Programming selected numerical and non-numerical problems of mathematical and
engineering nature.
Textbooks:
W.J. Palm III, Introduction to MATLAB 7 for Engineers, McGraw-Hill International
Edition, 2005.
U
Supplemental Materials:
Course slides (published at the course website: http://ece.goto-school.com/)
U
Duration in Weeks
Topics to be Covered:
U
73
1.
2.
0.5
0.5
2.5
1
1.5
1
0.5
0.5
2
2
1
1
ENGLISH
CODE/NO
CREDITS
ARABIC
CODE/NO. Th. Pr. Tr. Total
EE 332
332
EE 201, MATH 204
Required or Elective:
A pre-requisite for:
Required
EE 451
Catalogue Description:
Introduction. Solution of non-linear equations. Solution of large systems of linear
equations. Interpolation. Function approximation. Numerical differentiation and
integration. Solution of the initial value problem of ordinary differential equations.
Textbooks:
1 S.C. Chapra and R.P. Canale, Numerical Methods for Engineers, 6th Ed., McGraw
Hill, 2009
U
Supplemental Materials:
1 J.R. Rice, Numerical Methods, Software, and Analysis, 2nd ed, McGraw-Hill, 1992.
U
Topics to be Covered:
U
1.
2.
3.
4.
5.
6.
Duration
in Weeks
1
1
2
U
3.5
1
1
7.
1.5
1
1
1
Instructor
or
course
coordinator:
Last updated: January 2014
76
ENGLISH
CODE/NO
EE 251
Pre-requisites:
PHYS 202
RequiredCourse
COURSE TITLE
Catalogue Description:
Electric quantities and circuit elements. Kirchhoffs laws. Mesh and node analyses.
Sinusoidal steady-state analysis using phasors. Network theorem and transformations.
Ideal transformers. Three-phase circuits. Introduction to electrical machines. Operational
amplifiers and Diodes
Textbooks:
C.K. Alexander and M.N.O. Sadiku, Fundamentals of electric circuits, 4th ed,
McGraw-Hill,
Supplemental Materials:
W. H. Hayt, Engineering Circuit Design, 8th. Ed. McGraw-Hill 2008.
U
77
Duration in
Weeks
1
1
1.5
1
0.5
2
1
1.5
1.5
1
1
1
78
Course Title
Page No.
79
194
196
198
200
201
202
203
204
205
207
209
210
212
214
215
217
218
220
222
224
226
228
230
232
233
234
235
Supplemental Materials:
1. Mohammad S. Al-Shanti (1994) Arabic Language skills, Dar Al-Andalous, Hail,
Saudi Arabia. (In Arabic).
U
Topics to be Covered:
1 Importance of learning Arabic / language & communication /
Importance of Reading
2. Basic grammatical rules: Syntactic rules: Parts of speech / Case:
The dynamic ( Murab) & Indeclension (Mabni)
3. Nouns & Pronouns / Enclitic Pronouns Grammatical cases
4. Overt verbs
5. The Imperfective Tense / Strong, sick and imperfective verbs (five
U
80
No. of Weeks
U
1
1
1
1
1
6.
7.
8.
9.
10.
11.
12.
13.
verbs)
The Dual & Plural / Unnonated Nouns Types of declension
Diptotes & Triptotes
Subject & Predicates / Weak verbs
The doer / The Accusative object
Subject of the predicate
Morphology / auxiliary consonants
Plural & dual formation / Spelling rules for Hamza (medial &
final)
Types of Hamza/ Punctuation rules
Texts & Dictionaries
81
1
1
1
1
1
1
1
2
Supplemental Materials:
U
Topics to be Covered:
1. First Unit : Text Constructions Elements
Vocabulary and Reading text.
Text Construction Elements- pronunciation- sentence
paragraph-connection articles.
Office and Management writing ( report, management
message, minutes, autobiography)
U
2.
82
83
Supplemental Materials:
U
84
Topics to be Covered:
1. Getting Acquainted with Biology
2. Chemical Basic of Life
3. Cells And Tissues
4. Biodiversity
5. Metabolism and Bioenergetics
2. Nutrition
8. Gas exchange (respiratory) and Circulation
9. Excretion
10 Reproduction , Fertilization and Development
11 Basic Genetic Mechanisms
85
Supplemental Materials:
1. Chemistry, by Mortimer, 6th ed., Wadsworth Inc.
Course Learning Outcomes:
By the completion of the course the student should be able to:
1. Understand Significant figures,
2. Understand Scientific notation and units,
3. Understand Stoichiometry,
4. Understand Atomic structure & periodic table,
5. Understand Chemical bonding,
6. Understand Gases,
7. Understand Ionic equilibrium,
8. Understand Basic principles of organic chemistry
9. Understand Basic principles of biochemistry.
Topics to be Covered:
1. Significant figures,
2. Scientific notation and units,
3. Stoichiometry,
4, Atomic structure & periodic table,
5. Chemical bonding,
6. Gases,
7. Ionic equilibrium,
8. Basic principles of organic and biochemistry
U
86
CREDITS
ENGLISH ARABIC
Th. Pr Tr. Total
CODE/NO CODE/NO.
.
CHEM 231
231
3 3
4
None
Required Course
(Required/Elective):
Catalogue Description:
Polyunsaturated hydrocarbons and Dines, a,b-unsaturated carbonyl compounds,
dicarbonyl compounds, dicarboxylic acids and their esters, halogen and hydroxyl acids stereochemistry and carbohydrates, polynuclear aromatic hydrocarbons alicyclic
compounds
Textbooks:
1. Organic chemistry, by Graham Solomons Tw, Craig B Fryhle, 8th ed., 2007
U
Supplemental Materials:
1. Organic Chemistry, Morrison and Boyed , 6th ed., 1992, Allyn and Bacon.
2. Organic Chemistry, J. McMurry, 6th ed., 2003, Brooks/Cole Publishing Company.
3. Organic Chemistry, by I.L.Finar,Vol I &II, 6th 1973, Longman.
U
Topics to be Covered:
U
1.
2.
3.
4.
Duration in
weeks
4
4
U
87
3
3
CREDITS
ENGLISH ARABIC
CODE/NO CODE/NO. Th. Pr. Tr. Total
CHEM 232
232
3 3
4
None
Required Course
(Required/Elective):
Catalogue Description:
Polyunsaturated hydrocarbons and Dines, a,b-unsaturated carbonyl compounds,
dicarbonyl compounds, dicarboxylic acids and their esters, halogen and hydroxyl acids stereochemistry and carbohydrates, polynuclear aromatic hydrocarbons alicyclic
compounds.
Textbooks:
1. Organic chemistry, by Graham Solomons Tw, Craig B Fryhle, 8th ed., 2007
U
Supplemental Materials:
1. Organic Chemistry, Morrison and Boyed , 6th ed., 1992, Allyn and Bacon.
2. Organic Chemistry, J. McMurry, 6th ed., 2003, Brooks/Cole Publishing Company.
3. Organic Chemistry, by I.L.Finar,Vol I &II, 6th 1973, Longman.
U
Topics to be Covered:
U
1.
2.
3.
4,
5.
6.
Duration
in weeks
3
2
3
U
88
2
2
2
CREDITS
ENGLISH ARABIC
CODE/NO CODE/NO. Th. Pr. Tr. Total
CHEM 240
240
3 3
4
None
Required Course
(Required/Elective):
Catalogue Description:
Thermodynamic systems; first, second and third law of thermodynamics; free energy
functions and their applications, chemical equilibria, phase equilibria, electrochemical
cells, kinetics, theory of gases, chemical kinetics and reaction rates.
Textbooks:
1. Physical Chemistry, R. Alberty& R.Silby, 2nd ed., 1992, John Wiley & Sons.
U
Supplemental Materials:
1. Physical Chemistry, J. de Paula & P. Atkins, 7th ed., 2001, W. H. Freeman
U
Topics to be Covered:
U
1.
2.
3.
4.
5.
6.
7.
8.
Duration
in weeks
2
1
1
2
2
2
2
2
U
89
Topics to be Covered:
1. Safety rules,
2. Chemical nomenclature,
3. Acid radicals;
4, Dil. HCl group Acid radicals;
5. Conc. H2SO4group General group,
6. General scheme for testing acid radicals + unknown,
7. Basic radicals (1-6),
8. General scheme for testing base radicals + unknown;
Determination of the molecular weight of the volatile solution's vapor;
9. Determination of percentage and number of molecules of water of
crystallization;
10. Titration using different indicators;
11. Determination of solubility product of sparingly soluble salt,
12. Effect of common ion effect on the solubility
U
90
Required Course
Catalogue Description:
COMM 101 is structured as an introductory communication course. It is designed to
expose students to the theories, skills, and strategies needed to become effective
communicators in academic and professional settings. It explains the major theories of
human communication and persuasion in interpersonal, small group, and public
communication contexts. The course also focuses on effective communication skills and
strategies for writing reports and CVs and for preparing and delivering effective
presentations.
Textbooks:
1. Saad B. Al-Masoodi (editor) (2006) Communication skills, Jeddah, King Abdulaziz
University, Centre for Teaching & Learning Development. (In Arabic).
U
Supplemental Materials:
U
Topics to be Covered:
U
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Duration
in Weeks
1
1
2
1
1
2
1
1
2
2
U
Introductory Week
Introduction to human communication
Intrapersonal communication
Verbal communication
Non-verbal communication
Listening skills
Human communication for better human relationships
Communication within small groups
Public Speaking
Writing up CVs, letters & reports/ personal interview prep tips
91
CREDITS
ENGLISH ARABIC
CODE/NO CODE/NO. Th. Pr. Tr. Total
CPIT 100
100
1 3
3
None
Required Course
(Required/Elective):
Catalogue Description:
This course aims to provide the students with advanced skills to operate and make use of
a personal computer in different environments such as in academia, in business, and at
home. The course introduces the students to the main concepts and terminologies of
information technology, and equipped them with the knowledge to administer one of
widely-used operating systems. The course also aims to provide the students with the
practical skills to utilize an office productivity package for different purposes. The course
will prepare the students to new learning methodologies, namely distance learning and elearning. The delivery of the course contents will be based on a hands-on approach.
Textbooks:
1. Computer Skills, Prepared by Computer Skills Unit, Fourth Edition.
Supplemental Materials:
Course Learning Outcomes:
By the completion of the course the student should be able to:
1. Explain all the basic concepts of information technology and its related
terminologies.
2. Demonstrate advanced skills developed for the use of office productivity packages.
3. Search through the Internet effectively.
4. Fully utilize an e-mail service.
5. Demonstrate knowledge of e-learning and Distance Learning systems and how they
work and their benefits
No. of
Topics to be Covered:
Weeks
1. Introduction to information Technology
1
2. Operating Systems (Microsoft Windows )
1
3. Word Processing (Microsoft Word)
3
4. Data Sheets (Microsoft Excel)
2
5. Databases (Microsoft Access)
3
2. Presentations (Microsoft Power Point)
1
8. Internet (Microsoft IE)
1
9. E-Mails (Microsoft Outlook)
1
10 E-Learning and Distance Learning
1
U
92
93
94
Supplemental Materials:
1. Workbook with DVD-ROM.
2. Learning Management System (LMS) for online practice at
www.headwayplusonline.com accessed with the Students Access Code found in the
back of the Students Book.
3. Headway Plus Pre-Intermediate Writing Guide for additional writing support
U
95
96
COURSE TITLE
CREDITS
ARABIC
CODE/NO. Th. Pr. Tr. Total
ELI 104
104
18
2
Successful completion of ELI 103 or an Oxford
Online Placement Test score corresponding to
pre-intermediate proficiency level.
English Language IV
Pre-requisites:
Supplemental Materials:
1. Workbook with DVD-ROM.
2. Learning Management System (LMS) for online practice at
www.headwayplusonline.com accessed with the Students Access Code found in the
back of the Students Book.
3. Headway Plus Intermediate Writing Guide for additional writing support
U
ELI 104 consists of 18 hours of class time each week.The English Language Institute follows a
modular system with two modules taught ineach academic semester. Thus, the course length for
ELI 104 is one module of sevencalendar weeks which allows for a total of 126 hours of class time
each module. The104 Instructor's Pacing Guide is designed on a weekly basis, specifying
availablematerials and providing instructors with a degree of flexibility, allowing ample classtime
for language practice, and for the incorporation of relevant supplementarymaterials to facilitate
SLO achievement. It also emphasizes regular Learner Trainingas an essential component of the
learning process.
STUDIES
COURSE SYLLABUS - ISLS 101
CREDITS
ENGLISH ARABIC
COURSE TITLE
CODE/NO CODE/NO. Th. Pr. Tr. Total
Islamic Culture (1)
ISLS 101
101
3
3
None
Pre-requisites:
Course Role in Curriculum
Required Course
(Required/Elective):
Catalogue Description:
This course aims to familiarize students with the fundamental aspects and the basic
conceptsof Islamic culture. It further discusses the basic tenets of Islam as well as the
issuesand principles related to faith and their impact on both individuals and society. The
coursealso looks at the position of Islamic culture versus other cultures and civilizations.
Textbooks:
1. Dr. Ali O. Badahdah & Dr. Mohammad A. Ba-Jaber (2008) Islamic Culture (level
1), King Abdulaziz University, Centre for Scientific Publications. (In Arabic)
U
Supplemental Materials:
1. Hindi Saleh & Al-Hawari Mohammad (2000): Islamic Culture, Amman, Dar AlFikr. (In Arabic).
2. Al-Khatib Omar (1975): Glimpses of Islamic Culture, Beirut, Dar Al-Kitab AlLubnani. (In Arabic)
3. Jamal A. Mohammad (1977): Lectures on Islamic Culture, Jeddah. King Abdulaziz
University, Fifth Ed. (In Arabic)
4. Al-Sayyid A. Taha (1996): Islamic Culture, Amman, Dar Al-Manahij. (In Arabic)
U
98
Topics to be Covered:
1.
2.
3.
4.
5.
6.
99
No. of
Weeks
1
1
1
1
1
1
1
1
1
1
2
2
Supplemental Materials:
U
Topics to be Covered:
U
1
2.
3.
4.
5.
6.
7.
No. of
Weeks
2
2
3
3
U
100
1
1
2
COURSE TITLE
Islamic Culture (3)
Pre-requisites:
Course Role in Curriculum
Required Course
(Required/Elective):
Catalogue Description:
This course aims to: identify the Islamic systems to the students, with its general
specifications and its principals and concentrate in the special way on the family
system, and social system in Islam, with connect between theoretical provision and
the actual practical with its all different problems and affairs, and identify the
famous modern affairs, and show the ways hoe to deal with this affairs, in the
Islamic form.
Textbooks:
1. Dr. Faisal Bin Saeed Ba alamashHusham Bin Saeed Azhar, and DrFathiya
Abdulsamad Obaid,Islamic Culture (Third Level), King Abdulaziz University,
Centre for Scientific Publications. (In Arabic)
U
Supplemental Materials:
1.
U
No. of
Weeks
Topics to be Covered:
U
1.
2.
1
2
3.
102
1
2
1
1
1
1
1
1
1
CREDITS
ENGLISH ARABIC
CODE/NO CODE/NO. Th. Pr. Tr. Total
ISLS 401
401
2
2
ISLS 201
Required Course
(Required/Elective):
Catalogue Description:
This course aims to: identify the Islamic concept of morality, And its
importance in life, and to clarify the significance of ethics in the modern era,
and to highlight the assets and Islamic landmarks of Sciences linguistic,
psychological, social and media, and a statement contributions Muslims
practical and scientific therein, including strengthens affiliation Muslim youth
to his nation and his pride religion and civilization, and to clarify the
jurisprudence and Islamic Studies required in the above areas.
Textbooks:
1. Islamic culture (level IV) (under preparation and authoring) with participation of
the Faculty of Arts and Humanities and professors of Islamic Studies).
U
Supplemental Materials:
U
Topics to be Covered:
U
1
2.
3.
4.
5.
6.
7.
8.
No. of
Weeks
1
1
2
2
2
2
U
2
2
CREDITS
ENGLISH ARABIC
CODE/NO CODE/NO. Th. Pr. Tr. Total
MATH 110
110
3
3
None
Required Course
(Required/Elective):
Catalogue Description:
This course is a first Calculus dealing mainly with differential calculus. After a
discussion of few mathematical preliminaries, we introduce functions and models, limits
and derivatives, differentiation rules, and finally applications of differentiation.
Textbooks:
1. J. Stewart, Calculus, Early Transcendentals, Seventh Edition. International Metric
Version, 2012.
U
Supplemental Materials:
U
Topics to be Covered:
1. Mathematical Preliminaries
a. Numbers, Inequalities, and Absolute Values
b. Coordinate Geometry and Lines
c. Graphs of Second-Degree Equations
d. Trigonometry
2. Functions and Models
a. Four Ways to represent a Function
b. Mathematical Models
c. New Functions from Old Functions
d. Graphing Calculators and Computers
U
104
3.
4.
5.
e. Exponential Functions
f. Inverse Functions and Logarithms
Limits and Derivatives
a. The Tangent and Velocity Problems
b. The Limit of a Function
c. Calculating Limits Using the Limit Laws
d. Continuity
e. Limits at Infinity; Horizontal Asymptotes
f. Derivatives and Rates of Change
g. The Derivative as a Function
Differentiation Rules
a. Derivatives of Polynomials and Exponential Functions
b. The Product and Quotient Rules
c. Derivatives of Trigonometric Functions
d. The Chain Rule
e. Implicit Differentiation
f. Derivatives of Logarithmic Functions
g. Rates of Change in the Sciences
h. Exponential Approximations and Differentials
i. Hyperbolic Functions
Applications of Differentiation
a. Maximum and Minimum Values
b. The Mean Value Theorem
c. How derivatives Affect the Shape of a Graph
d. Intermediate Forms and LHospital Rule
e. Summary of Curve Sketching
f. Graphing with Calculus and Calculators
g. Optimization Problems
h. Antiderivatives
105
COURSE TITLE
Calculus II
Pre-requisites:
Course Role in Curriculum
Required Course
(Required/Elective):
Catalogue Description:
This course deals mainly with Integral Calculus. We cover Integrals, Applications of
Integration, Techniques of Integration, and further applications of Integration to the
Sciences and Engineering.
Textbooks:
1. J. Stewart, Calculus, Early Transcendentals, Seventh Edition. International Metric
Version, 2012.
U
Supplemental Materials:
U
Topics to be Covered:
1. Integration
a. Sigma Notation
b. Areas and Distances
c. The Definite Integral
d. The Fundamental Theorem of Calculus
e. Indefinite Integrals and the Net Change Theorem
f. The Substitution Rule
2. Applications of Integration
a. Areas between Curves
b. Volumes
c. Volumes by Cylindrical Shells
d. Work
e. Average Value of a Function
U
106
3.
Techniques of Integration
a. Integration by Parts
b. Trigonometric Integrals
c. Trigonometric Substitution
d. Integration of Rational Functions by Partial Fractions
e. Strategy for Integration
f. Approximate Integration
g. Improper Integrals
107
COURSE TITLE
Calculus III
Pre-requisites:
Course Role in Curriculum
Required Course
(Required/Elective):
Catalogue Description:
This course deals with Calculus topics that are not treated in Math 110 and Math 202.
We will study in details Parametric Equations and Polar Coordinates, Vectors and the
Geometry of Space, Vector Functions, and Partial derivatives.
Textbooks:
1. J. Stewart, Calculus, Early Transcendentals, Seventh Edition. International Metric
Version, 2012.
U
Supplemental Materials:
U
Topics to be Covered:
1. Parametric Equations and Polar Coordinates
a. Curves Defined by Parametric Equation
b. Calculus with Parametric Curves
c. Polar Coordinates
d. Areas and Lengths in Polar Coordinates
e. Conic Sections
f. Conic Sections in Polar Coordinates
2. Vectors and the Geometry of Space
a. Three-Dimensional Coordinate Systems
b. Vectors
c. The Dot Product
U
108
3.
4.
109
CREDITS
ENGLISH ARABIC
CODE/NO CODE/NO. Th. Pr. Tr. Total
MATH 204
204
3 1
3
MATH 202
Required Course
(Required/Elective):
Catalogue Description:
Basic concepts - First-order differential equations - Existences and Uniqueness for initial
boundary value problems - Separable variables - Homogeneous equations - Exact
equations. Linear equations - Equations of Bernoulli - Ricatti. Substitutions - Picard's
methods - Linear differential equations of higher-order - Homogeneous equations with
constant coefficients, Method of undetermined coefficients, Method of variation of
parameters. Differential equations with variable coefficients, Cauchy-Euler equations Laplace Transform - Applications of Laplace transform to solve ordinary differential
equations.
Textbooks:
1. C. H. Edwards & D. E. Penney, Elementary Differential Equations with Boundary
Value Problems, Sixth Edition. Pearson Prentice Hill, 2008.
U
Supplemental Materials:
U
Topics to be Covered:
1. Basic concepts:
a. Definitions.
b. Classifications of ODEs.
c. Solutions types.
d. Origin of ODEs.
2. First-order differential equations.
a. Preliminary theory.
b. Existences and uniqueness for initial boundary value
problems.
c. Separable variables,
d. Homogeneous equations.
e. Exact equations.
U
110
3.
4.
a. Linear equations.
f. Equations of Bernoulli,
g. Ricatti. Substitutions.
h. Picard's methods.
Linear differential equations of higher-order:
a. Preliminary theory
b. Existences and uniqueness for initial boundary value
problems.
c. Basic concepts;
a. Linear dependence and Linear independence,
d. Superposition principle for homogeneous equations,
e. fundamental set,
f. Superposition principle for non-homogeneous equations,
g. Constructing of a second solution from a known solution,
h. Homogeneous equations with constant coefficients,
i. Method of undetermined coefficients,
j. Method of variation of parameters.
k. Differential equations with variable coefficients,
l. Cauchy-Euler equations.
Laplace Transform:
a. Laplace transform,
b. Inverse transform,
c. Translation theorems,
d. differentiation and Integration of the Laplace Transform,
e. Partial Fractions,
f. Transform of derivatives,
g. Convolution,
h. Transform of periodic functions,
i. Applications of Laplace transform to solve ordinary
differential equations.
111
CREDITS
ENGLISH
ARABIC
CODE/NO CODE/NO. Th. Pr. Tr. Total
MATH 205
205
3
3
MATH 202 and MATH 203
Required Course
(Required/Elective):
Catalogue Description:
This course deals mainly with Integral Calculus. We cover Integrals, Applications of
Integration, Techniques of Integration, and further applications of Integration to the
Sciences and Engineering.
Textbooks:
1. J. Stewart, Calculus, Early Transcendentals, Seventh Edition. International Metric
Version, 2012.
U
Supplemental Materials:
U
Topics to be Covered:
1. Infinite Sequences and Series
a. Sequences
b. Series
c. The Integral Test and Estimates of Sums
d. The Comparison Tests
e. Alternating Series
f. Absolute Convergence and the Ratio and Root Tests
g. Strategy for Testing Series
h. Power Series
i. Representations of Functions as Power Series
j. Taylor and Maclaurin Series
k. Applications of Taylor Polynomials
2. Multiple Integrals
a. Double Integrals over Rectangles
U
112
3.
b. Iterated Integrals
c. Double Integrals over General Regions
d. Double Integrals in Polar Coordinates
e. Applications of Double Integrals
f. Triple Integrals
g. Triple Integrals in Cylindrical Coordinates
h. Triple Integrals in Spherical Coordinates
i. Change of Variables in Multiple Integrals
Vector Calculus
a. Vector Fields
b. Line Integrals
c. The Fundamental Theorem for Line Integrals
d. Greens Theorem
e. Curl and Divergence
f. Parametric Surfaces and Their Areas
g. Surface Integrals
113
CREDITS
ENGLISH ARABIC
CODE/NO CODE/NO. Th. Pr. Tr. Total
PHYS 110
110
3
3
None
Required Course
(Required/Elective):
Catalogue Description:
Physical quantities and dimensional analysis, vectors, motion in one dimension, motion
in a plane, Newtons laws, friction, work and energy, impulse, momentum, collisions, and
rotational motion.
Textbooks:
1. C. H. Edwards & D. E. Penney, Elementary Differential Equations with Boundary
Value Problems, Sixth Edition. Pearson Prentice Hill, 2008.
U
Supplemental Materials:
1. Physics for scientist and engineers with modern physics by Serway (2005), Saunders
College Publisher.
2. University Physics by Sears, Zemansky, and Young (2007).
3. Physics by Halliday, Resnick & Krane (2008) John Wiley & Sons.
U
Topics to be Covered:
1. Physical quantities and dimensional analysis,
2. Vectors,
3. Motion in one dimension,
4, Motion in a plane,
5. Newtons laws,
6. Friction,
7. Work and energy,
8. Impulse,
9. Momentum,
10. Collisions,
11. Rotational motion.
U
114
CREDITS
ENGLISH ARABIC
CODE/NO CODE/NO. Th. Pr. Tr. Total
PHYS 202
202
3 2
4
PHYS 110, MATH 110
Required Course
(Required/Elective):
Catalogue Description:
Charge and electric force, electric field, Gauss law, electric potential, capacitance,
current and resistance, DC circuits, magnetic force, magnetic field, induction and
inductance, magnetism of matter and Maxwells equations.
Textbooks:
1. Halliday, Resnick & Walker, Fundamental of Physics, John Wiley & Sons, 2008.
U
Supplemental Materials:
1. Physics for scientist and engineers with modern physics by Serway (2005), Saunders
College Publisher.
2. University Physics by Sears, Zemansky, and Young (2007).
3. Physics by Halliday, Resnick & Krane (2008) John Wiley & Sons.
U
Topics to be Covered:
1. Charge and electric force
2. Electric field,
3. Gauss law,
4, Electric potential,
5. Capacitance,
6. Current and resistance,
7. DC circuits,
8. Magnetic force,
9. Magnetic field,
10. Induction and inductance,
11. Magnetism of matter and Maxwells equations.
U
115
CREDITS
ENGLISH ARABIC
CODE/NO CODE/NO. Th. Pr. Tr. Total
PHYS 281
281
2
1
PHYS 110
Required Course
(Required/Elective):
Catalogue Description:
Safety & regulations- friction- free fall- force table- Newtons law- projectile motion- air
track- rotational motion- simple pendulum- hooks law
Textbooks:
1. Halliday, Resnick & Walker, Fundamental of Physics, John Wiley & Sons, 2008.
U
Supplemental Materials:
U
Topics to be Covered:
1. Safety & regulations2. friction
3. free fall
4, force table
5. Newtons law
6. projectile motion
7. air track
8. rotational motion
9. simple pendulum
10. hooks law
U
116
ENGLISH
CODE/NO
STAT 110
None
CREDITS
ARABIC
CODE/NO. Th. Pr. Tr. Total
281
3
3
Required Course
(Required/Elective):
Catalogue Description:
This course is designed to teach students how to use a broad base of statistical methods and
concepts to organize, analyze, and interpret hypotheses developed in various applications. This
course consists of three main parts: (1) Data analysis and description,
(2) Probability and random variables, and (3) Inferential statistics. Main goal for this class is to
familiarize students with the various techniques of statistical analyses that are utilized in
different disciplines. Emphasis will be on the basic concepts and their meaning, as well as their
applications and interpretation
Textbooks:
1. Elementary Statistics a Step by Step Approach, 7th Edition by Allan Bluman,
McGraw/Hill, 2006.
U
Supplemental Materials:
1. Larson & Farber, "Elementary Statistics: Picturing the World", 3rd Edition (2006)
U
Topics to be Covered:
1. Collecting data, graphical presentation and tabulation.
2. Measures of central tendency: Mean, Median and Mode.
3. Measures of dispersion: range, and standard deviation.
4, Relative Dispersion and Skewness.
5. Elementary probability: random experiment, sample space, event, and
computation of probability. Rules of addition and multiplication, conditional
probability and independence.
6. Random variables, probability distributions, variance and expected value - Some
probability distributions (Binomial, Poisson, and Normal).
7. Sampling and sampling distribution: Sampling distribution of Sample Mean (in
case of large samples), central limit theorem and sampling distribution of
U
117
proportion.
Estimation of population mean and proportion.
Tests of statistical hypotheses: testing of mean, differences between two means,
proportion, differences between two proportions in large samples.
9. Simple linear regression and Correlation: Pearson's correlation coefficient and
Spearman's rank correlation coefficient.
10. Collecting data, graphical presentation and tabulation.
8.
118
119