Академический Документы
Профессиональный Документы
Культура Документы
Handmade in England
Step 2. Outline the pattern onto the Step 3. Repeat the same process with
exterior fabric. Add 1cm seam allowance. the fusible wadding WITHOUT adding the
Make two. Repeat the same process for seem allowance.
the interior fabric. Make sure that the
vertical line on the sleeve (red arrow) is
aligned with the grain of the fabric (blue
arrow).
Step 6. Sew the side seams (blue dotted Step 7. Open the side seams and iron
lines). gently (blue arrows). Make sure that the
bottom seam is still folded inwards (green
arrow). Repeat for the interior fabric.
Step 9. Turn the work back out. Secure Step 10. Finally, sew the bottom seam at
the bottom seam (remember it is folded) 2.5mm from the edge. Then sew the top
with pins or clips. at 2.5mm from the edge (blue dotted
lines).
Lastly....
I hope you enjoy making the cup sleeve. If you have any questions about the
pattern etc. please don’t hesitate to contact me.
Kyoko
info@cottonandcloud.com
www.cottonandcloud.blogspot.com