Академический Документы
Профессиональный Документы
Культура Документы
(a)
b) uniformly distributed
d) none of the above
(a)
03. If the plane of loading does not pass through one of the principle
centroidal axes of the cross- section of the beam, the beam is said to be
a) plane
c) either of the above
b) oblique
d) none of the above
(b)
(a)
05. In which the following beams, the supports are not situated at the Ends
a)
b)
c)
d)
cantilever beam
simply supported beam
overhanging beam
none of the above
(c)
(c)
(d)
b) continuous beams
c) both a & b
(c)
linear law
parabolic law
either of the above
none of the above
(a)
b) parabolic law
c) cubic law
(b)
b) parabolic law
c) linear law
(a)
b)wl2 /3
c) wl2 /6
d) wl2 /24
(c)
(c)
14. In a simply supported beam carrying a uniformly distributed load of w per unit run over the whole span the
maximum B.M. is
Equal to
15.
a) wl2 /4
b) wl3 /6
c) wl2 /8
d) wl3 /8
(c)
In a simply supported beam carrying a load whose intensity varies uniformly from zero at one end to w per
unit run at the mid span the maximum bending moment is equal to
b) wl2 /4
b) wl2 /8
c) wl2 /12
d) wl2 /24
(c)
16. In a simply supported beam carrying a load whose intensity varies one end to w per unit run at the other end
the maximum bending moment is equal to
a)wl2 /4
c) wl2 /24
b) wl2 /12
d) wl2 /93
(d)
19.
(c)
If a cantilever beam is subjected to a point load at its free end, then the shear force under the point load is
a) zero
The bending moment at the free end of a cantilever beam carrying any type of load is
(c)
20.
a)zero
b)minimum
c)maximum
(a)
When shear force at a point is zero, then bending moment at that point will be
a)zero
b)minimum
c)maximum
d)infinity
(c)