Академический Документы
Профессиональный Документы
Культура Документы
(Liquid Dessicant)
Commonly using TEG
Liquid dessicant is more economically viable
Reduce water content level to 10 pmmv
Liquid Dessicant more simple to operate and maintain
Can be used for sour gases but requires precaution due to solubility of acid gases in dessicant solu
High pressure and high gas content, glycol can be soluble in gas
Dew point depression ranged 60-120 F
Inlet gas scrubber required to prevent contaminant into glycol contactor
Contious process of solid dessicant requires two or more vessel with one online and the otherone re
On-line bed is generaly active for 8-24 hours
Water removal at 375-600 F depend on dessicant used and perfomance spec 375 F for silica and 60
Regeneration usualy using dry process gas or waste heat from engine and turbines
Gas flow during adsorption is a downflow to give higher gas velocities and smaller tower diamter to
Regeneration gas flow usially upflow during heating period so residual water left on the dessicant a
this also help to strip contaminant from the top of the bed and extending the dessicant life
in cooling period the gas flow upflow if the gas is completely free of water if cooling gas contain wa
In the sarturation zone, molecular sieve is expected to hold 13 pounds of water per 100 pounds of
The capacity need to be adjusted when the gas is not water sarturated and temperature is above 7
Calcium Chloride
can be used as consumable dessicante do dehydrate natural gas
Conversion
http://www.cheresources.com/invision/topic/15350-dewpoint-spec-and-water-moisture/
http://www.phymetrix.com/Software.htm
http://www.cheresources.com/invision/topic/10541-water-content-of-natural-gas/
n dew points
equired to prevent hydrate and ice formation
Manufactured from sulfuric acid and sodium silicate and pure silicon dioxide SiO2
moisture/
n dioxide SiO2
n adsiption is resumed
Dehydration Technology
Advantages
More economically viable compared to Solid
Dessicant
Solid Dessicant
Disadvantages
Require precaution for Sour Gas due to solubility of acid gas in
dessicant solution or vice versa (High acid gas and High Pressure)
Specification
Dew point depression ranged 60120 F
Reduce water content to 10 ppmv
Inlet gas scrubber required to
prevent contaminant into glycol
contactor
TEG is common used of Liquid
Dessicant
To Do list
Convert Dew Point to PPMV