Академический Документы
Профессиональный Документы
Культура Документы
Chapter 5: Sensor cables and connection adapters for mobile data collectors
VIB 6.785 : SwitchBox - Channel switching unit for CLD-/ ICP-type accelerometers, 12 ch.
C
1
2
7 6
5
10 9
11
4 3
1 12
3
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
4
5
MIL
TNC
Application
The SwitchBox channel switching unit VIB 6.785 has been
designed to enable inaccessible measurement locations to
be monitored and hard wired back to a safe position.
The channels are individually selected by a rotary switch.
The data collector (e.g. VIBSCANNER or VIBXPERT) is connected to one of the two sockets (TNC/MIL) using an appropriate cable.
Installation
The SwitchBox requires no external power supply. Up to
12 accelerometers can be connected to the SwitchBox.
All accelerometer cables are glanded into the SwitchBox,
terminations are made off into spring terminals. The VIB
81060 screwdriver is included in the scope of delivery for
the installation of the accelerometer cables.
As of version 1.1 the SwitchBox can also be installed in
hazardous areas.
Accessories
VIB 5.436 Spiral cable for Linedrive accelerometer, TNC
VIB 5.422 Cable for ICP-type accelerometer, MIL
Technical data
Dimensions
VIB 6.785
in mm
Input
Output
Temperature range
Env. protection
IP 65
200
135
7 6
11
4 3
10 9
200
160
1 12
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
220
General
PARAMETER
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
VIBNODE
3
4
3
1
VIB 8. 51 5 / M 5
R
PR FT
EC
TNE
www.pruftechnik.com 11.2014
Page 171