Академический Документы
Профессиональный Документы
Культура Документы
This circuit is used to show the current time and on-off timer. The
circuit uses IC FUJISU MB95F264 which is a new IC generation,
small size, and provided memory upto 20 kilobytes. In addition,
to apply with other application, you can re-program an IC.
- Power supply : 12VDC. 90mA. max.
- Display in 24-hour format.
- There are two display formats;
Hour : Minute or Minute : Second
operation.
- Can be set 20 programs maximum
for on-off timing.
- There is a connecting point
with FUJISU programmer MB2146-08-E.
This circuit is an alarm ammeter that can check whether the electric
wire is connected to an AC power supply line. Just observe the
display of an LED by placing the alarm ammeter close to a loaded
electric wire if the LED blinks and/or simultaneously turns on with
beeps meaning there is an AC power on the supply line.
- Power supply : 9VDC.
- Electric current consumption : 25mA.
- Its detection distance is about
1 cm. from the electric wire.
- It is equipped with an LED
display and a loudspeaker for detection.
This unit can be used to provide timing for many of activities as well
as the generation of start & stop action on all electrical devices.
- Power supply : 12VDC./ max. 90mA.
- Time can be set to start or stop the operation
of the circuit.
- Timer can be set from 1 second
to 9999.59.59 hours.
- Loading : 1A.
- PCB dimensions : 2.35x3.85 inches.
Page 34