Академический Документы
Профессиональный Документы
Культура Документы
Condition
Maximum gap
Original standard or
certification body
policy required that
suffix X is marked
where the test gap is
less than the values in
the standard used.
3a
3b
6a
6b
6c
Other
conditions234
Other
joints
1. The original standard is the edition of the standard to which the equipment was certified.
2. The reduced gap (80 % or 40 %) is only applicable to damaged parts subject to reclamation.
3. Where the reduced gap contravenes the requirements for the minimum radial gap k and/or the
maximal radial gap m, the required gap shall be the smallest that meets the k and m requirements.
4. Damaged gaps on equipment in environments requiring Group IIC equipment cannot be reclaimed.
BS EN 60079-19:2011
YES
YES
YES
Has the
certificate got a
suffix X?
YES
NO
Use then
values
specified in the
standard used.
YES
Reclamation
not permitted.
YES
YES
YES
NO