Академический Документы
Профессиональный Документы
Культура Документы
02
Dt of Revision
: 17.9.2012
Issue No
: 2
Section
: 0
Topic
: 1 OF 3
QA
Document
DQM-01
FORMAT NO.:PUR/TENDDOC/P6/06
CPRI
www.tenderwizard.com/CPRI
Section II -Technical Specification
Tender Enquery No : BUY/DSD-01/16-17
Name of the Equipment: Power Quality Analyzer, Software & other accessories
Note :The Offers should be submitted only in this format otherwise the offer will be liable for rejection
A detailed technical catalogue/literature/phamplet and any other technical details shall be sent in hard copy in a sealed cover superscribing enquiry number
and due date so as to reach the following address with the due date and time. This is very much essential to evaluate your offer.
Name of the Vendor
Offer Number and Date
Sl.No.
Parameters
CPRI Specification/Requirements
Qty
Scope (supply / supply & Installation / Supply of Power Quality Analyzer, Software & other accessories
suply, installation & training)
Measurement type
Display
0 to 780 V rms
Page 1 of 4
Deviation/Remark
s Specify if any
DC voltage range
0 to 780 V
Harmonic voltage
Voltage flicker
10
11
2 kHz to 80 kHz
12
13
6.0 kV peak
14
0.5 Hz to 49.5 Hz
15
Voltage Accuracy
16
17
Current harmonics
18
19
Current unbalance
Current unbalance
20
Current Accuracy
21
Power accuracy
22
Harmonic power
23
24
Frequency range
40 to 70 Hz or wider range
25
Voltage channels
4 Nos.
26
Current Channels
4 Nos.
27
Input resistance
28
29
OFF, 5min., 10min., 30 min., 1h, 2h, etc., or better features. The
recording can be done with internal memory or external memory like
SD card
30
31
Power supply
32
Battery Pack
33
Data transfer
34
Memory capacity
35
Data Conversion
36
0 50 oC and 80 % RH
Page 3 of 4
37
Accessories
38
Carry case
1 No.
39
40
Calibration certificate
Note : Compliance to meeting all of the above technical specification requirement should be furnished in detail against each serial number in GTP column with
supporting technical write up, illustrations, schematics, single line diagrams, drawings, catalogues of proposed sub-equipment & instruments suppliers etc.
PN : 1. A detailed technical catalogue/literature/phamplet and any other technical details shall be sent in hard copy in a sealed cover super scribing tender
enquiry number and due date so as to reach the following address within the due date and time. This is very much essential to evaluate your offer.
2. Letter of authorization issued by the foreign Principal shall also be sent by the Indian agents who have offered on behalf of their Principals.
The Joint Director (Purchase)
Central Power Research Institute,
Post Box No.8066
Prof.Sir C.V.Raman Road, Sadashivanagar Post Office,
BANGALORE-560 080. INDIA
Ph. No.080-23602919 / 23602829
Fax : 080-23604446
Page 4 of 4