Академический Документы
Профессиональный Документы
Культура Документы
(Samples Only)
Valve Descriptions
The Gem Pump Clip mounts to your bicycle frame using existing water bottle cage bosses and hardware.
Remove the water bottle cage bolts from your frame to install the pump clip.
Place the clip onto the frame and secure using the existing hardware. If using a water bottle cage, the clip
mounts underneath the cage. Longer hardware may be needed and can be acquired from your local dealer if
3.
4.
The Gem Pump Clip mounts to your bicycle frame using existing water bottle cage bosses and hardware.
Remove the water bottle cage bolts from your frame to install the pump clip.
Place the clip onto the frame and secure using the existing hardware. If using a water bottle cage, the clip
mounts underneath the cage. Longer hardware may be needed and can be acquired from your local dealer if
necessary. (See Diagram)
Snap the pump into the clip, head facing up and secure with the rubber strap. (See Diagram)
Please remove your pump (and any other mounted accessories) before washing your bike.
1.
2.
3.
4.
5.
Unscrew the pump head cap to expose the rubber gasket and plastic adapter.
Activate the pump head lever to force the rubber gasket out. You may need to tap the pump on a hard surface to
expose the gasket enough to grab with your fingers.
Once both the rubber gasket and the plastic adapter are removed, orientate as per the guideline for presta or
schrader valves. (See drawing).
Make sure the lever is returned to the unlocked position and re-insert the rubber gasket and plastic adaptor into
the pump head, plastic part first.
Screw the head cap back onto the pump until it bottoms out against the head body.
Repair Parts
Crankbrothers Gem Head Parts Kit # 15235 is available through your Crankbrothers dealer or by contacting
smallparts@crankbrothers.com. The kit consists of a valve cap x 1, rubber gasket x 1 and plastic adaptor x 1.