Академический Документы
Профессиональный Документы
Культура Документы
product
guide
features
All New Design
110 ft (33.52 m)
contents
Four-Section Boom
Features
Mounting Configurations
Specifications
Capacities
Internal
Anti-two-block
NEW VISION
CAB
www.manitowoccranegroup.com
Accessories
10
Dimensions Specifications
11
features
Why Buy a National Crane Series 1300A?
30 USt Rating (27.2 t) The new 1300A is a 30 USt machine and has increased capacities over
the former Series 1300 model.
110 ft (33.52 m) Four-section Boom The longest in its size range. The longer boom allows the
operator to perform more lifts without the use of a jib, reducing setup time and improving
efficiency. A 69 ft (21 m) four-section boom or a 100 ft (30.5 m) four-section boom is also available.
Overload Protection All National Crane boom trucks are equipped with overload protection:
Load Moment Indicator (LMI) is standard on all series 1300A machines.
LMI with WADS (Working Area Definition System) display console is weatherproof.
LCD display is visible in full or low light.
All crane load lifting values are displayed simultaneously.
Self-lubricating Easy Glide Boom Wear Pads The self-lubricating boom pads, standard on
the 1300A, reduce the conditions that cause boom chatter and vibration. The net result is
smoother crane operation.
HO-style Outriggers Two sets of HO-style outriggers with 20 ft (6.09 m) span, with 14 ft
(4.27 m) mid span setting with manual locks and reduced capacity chart and fully retracted
outrigger spread with reduced capacity chart. Outriggers are equipped with removable ball and
socket aluminum foot pads. Independent outrigger controls (umbilical design) are located at rear
of the crane and includes level indicator (sight bubble).
Continuous Rotation/Glide Swing The series 1300A is supplied with 360 continuous rotation
as standard, along with the glide swing feature - allowing free swing during rotation - and a
manually applied foot brake.
30 USt (27.2 t)
maximum capacity
163 ft (49.68 m) w/optional jib
maximum vertical reach*
119 ft (36.27 m) maximum
vertical hydraulic reach*
Load Moment Indicator system
(LMI) with WADS
Proportional boom
extension
High performance
planetary winch
Heavy-duty triple
pump hydraulics
* Maximum vertical reach is
ground-level to boom tip height
at maximum extension and
angle with outriggers/stabilizers
fully extended.
Adjustable Swing Speed Standard on the 1300A. A control knob located on the swing motor
brake release valve can be easily adjusted to the crane operators swing speed preference.
Oil Cooler Radiator mounted on top of front outriggers with electric fan is standard.
Heavier-duty Torsion Box The stronger standard torsion box improves rigidity, reduces truck
frame flex and reduces the need for turret mounted counterweight.
Speedy-reeve Boom Tip and Sheave Blocks These standard features simplify rigging
changes by decreasing the time needed to change line reeving.
Electronic versions of manuals available through Manitowoc Crane CARE.
Pre-painted Components Painting crane components before assembly reduces the possibility
of rust, improves serviceability and enhances the appearance of the machine.
Deluxe Operators Cab NEW VISION CAB has a rigid powder coated steel structure, is well
insulated, with ample safety glass for operator visibility and comfort. Multi-position seat with arm
rest and single axis joystick controls, ventilation fans, diesel heater, wipers. Optional air
conditioning is available. Optional open-seat control station in lieu of enclosed cab is available.
Improved Serviceability
Bearings on the boom extend and retract cables can be greased through access holes in the
boom side plates.
Number of internal boom parts has been reduced, decreasing service time when rebuilding the
machine.
New State-of-the-art Control Valve Provides smoother operation. The new design eliminates
parts, reducing repair costs and improving the machines serviceability.
1300A
National Crane is the Market Leader National Crane is number one in the production of
commercial truck-mounted boom trucks, with more than 35,000 units sold. National Crane has
many programs and people directly and indirectly involved to provide our customers with reliable
products.
National Crane has the boom truck industrys leading test program. Every structural part of the
crane is cycle tested up to 60,000 cycles at full capacity. In addition to cycle testing, each model
is subjected to state-of-the-art strain gauge testing that measures metal deformation as small as
one one-millionth of an inch. The net result is that any weak areas are caught in test, not on job
sites where costly downtime occurs.
Lift and telescoping cylinders are manufactured by National Crane, so that the seals, packing
glands, and end plates are traced for accurate shipment of replacement parts.
Parts are available for all National Crane machines for the life of the crane.
National Crane has a formalized quality program and is ISO 9001 approved.
National Cranes Quality Management System is ISO 9001:2000 Approved.
mounting configuration
3
Working area
360
Gross Axle Weight Rating (GAWR),
front 18,000 lb (8 165 kg)
Gross Axle Weight Rating (GAWR),
rear 34,000 lb (15 455 kg)
Gross Vehicle Weight Rating
52,000 lb (23 587 kg)
Wheelbase (WB)
258 in (6.55 m)
NOTE 2:
NOTE 3:
NOTE 4:
NOTE 5:
1300A
specifications
Boom and Jib Combinations Data
Available in three basic models.
Model 1369A Equipped with a 22-69 ft (6.7-21.03 m) four-section boom. Maximum tip height is 78 ft (23.77 m).
Model 13100A Equipped with a 29-100 ft (8.83-30.48 m) four-section boom. This model can be equipped with a 25-44 ft (7.62-13.41 m)
two section jib. Maximum tip height w/44ft (13.41 m) jib is 153 ft (44.63 m).
Model 13110A Equipped with a 33-110 ft (10.05-33.52 m) four-section boom. This model can be equipped with a 25-44 ft (7.62-13.41 m)
two-section jib. Maximum tip height w/44ft (13.41 m) jib is 163 ft (49.68 m).
Winch
Average
Cable
Supplied
Breaking
Strength
1300A
Burst
of
Speed
9/16 in Diameter
Rotation
38,500 lb
Resistant (17 464 kg)
1 Part Line
100 ft
75 ft
60 ft
50 ft
43 ft
36 ft
110 ft
94 ft
78 ft
62 ft
46 ft
32 ft
Lift and
Speed
Lift and
Speed
Lift and
Speed
Lift and
Speed
Lift and
Speed
Lift and
Speed
Lift and
Speed
Block Type
Downhaul Weight
1 Sheave Block
2 Sheave Block
3 Sheave Block
Rating
5 USt (4.53t)
12 USt (10.89t)
19 USt (17.24t)
30 USt (27.22t)
All winch pulls and speeds in this chart are shown on the fourth layer. Winch line pulls would increase on the first, second
and third layers. Winch line speed would decrease on the first, second and third layers. Winch line pulls may be limited
by the winch capacity or the ANSI 5 to 1 cable safety factor. These are shown below:
Winch
Standard planetary
Weight
150 lb (68 kg)
305 lb (139 kg)
350 lb (159 kg)
575 lb (261 kg)
capacities
Load Chart Rating: Series 1369A (21 m) Boom / Full-Span Outrigger 20 ft (6.0 m)
National Crane will send you a chart on request or you may secure needed load rating information through your nearest National
Crane dealer.
80
69
61
80
70
60
51
50
41
60
40
B
30
31
40
20
22
10
HEIGHT IN FEET
100
20
0
-10
0
0
20
Operating radius
from C/L rotation
with unloaded boom
40
60
80
RADIUS IN FEET
CAUTION:
Do not operate crane booms, jib extensions, any
accessories or loads within 10 ft (3m) of live power lines
or other conductors of electricity.
Jib and boom capacities shown are maximum for each
section.
Do not exceed capacities at reduced radii.
Load ratings shown on the appropriate charts are maximum
allowable loads with the crane mounted on a factory-approved
truck and all outriggers at either full span or at mid span range
and set on a firm level surface so that the crane is level and all
tires are suspended.
Always level the crane with the level indicator located on the
crane.
The operator must reduce load to allow for factors such as
wind, ground conditions, operating speeds and their effects on
freely suspended loads.
Overloading this crane may cause structural collapse or
instability.
Weights on any accessories attached to the boom or loadline
must be deducted from the load chart capacities.
Do not exceed jib capabilities at any reduced boom lengths.
Do not deadhead lineblock against boom tip when extending
boom or winching up.
Keep at least three wraps of loadline on drum at all times.
Use only specified cable with this machine.
LOADLINE EQUIPMENT
DEDUCT
SERIES 1369A
NO JIB /
FULL-SPAN
OUTRIGGER 20 ft
kg)
kg)
kg)
kg)
Load Chart Rating: Series 1369A (21 m) Boom / Full-Span Outrigger 20 ft (6.0 m)
22 ft 69 ft (6.7 21.03 M) BOOM RATED LOADS WITHOUT JIB
5
8
10
12
15
20
25
30
35
40
45
50
55
60
65
22 ft
BOOM
(lb)
74.5
66
59.5
52.5
41.5
* 60,000
47,500
40,300
34,900
28,600
13,300
LOADED
BOOM
ANGLE
(deg)
31 ft
BOOM
(lb)
74
70
66
59.5
47
32
LOADED
BOOM
ANGLE
(deg)
41 ft
BOOM
(lb)
33,500
33,100
32,700
27,300
21,200
16,550
78.5
75.5
72.5
68
60
51
41
27.5
33,400
32,300
31,100
25,900
20,300
16,600
13,800
10,900
8,500
5,700
LOADED
BOOM
ANGLE
(deg)
51 ft
BOOM
(lb)
79.5
77
73.5
67
60.5
53.5
46
37
26
35,000
30,100
24,900
19,500
16,000
13,500
11,050
8,750
7,200
4,050
LOADED
BOOM
ANGLE
(deg)
61 ft
BOOM
(lb)
80
77
72
66.5
61
55.5
49
42.5
34.5
24
29,000
24,200
18,850
15,450
13,050
11,150
8,850
7,300
6,050
5,100
2,950
LOADED
BOOM
69 ft
ANGLE BOOM
(deg)
(lb)
79
74.5
70
65.5
60.5
55.5
50
44
37
29
17.5
0
19,350
18,450
15,050
12,700
10,950
8,950
7,350
6,100
5,150
4,350
3,700
2,300
1300A
LOADED
LOADED BOOM
RADIUS ANGLE
(deg)
(ft)
capacities
Load Chart Rating: Series 13100A (30.5 m) Boom with 25-44 ft (7.62 m 13.4 m) Jib / Full-Span Outrigger 20 ft (6.0 m)
160
2nd Jib
44
80
70
140
60
1st Jib
25
50
120
45
100
100
44
86
72
40
80
Stability Limit
Line w/ 150 lb
Block
60
Stability Limit
Line w/ 150 lb
Block
58
30
44
20
29
40
10
20
Do not move
unloaded boom
beyond limit line.
HEIGHT IN FEET
National Crane will send you a chart on request or you may secure needed load rating information through your nearest National
Crane dealer.
Structural Limit
Line w/ 150 lb
Block
Structural Limit
Line w/ 44' Jib
Erected
-10
0
20
Operating radius 0
from C/L rotation
with unloaded boom
40
60
80
100
Structural Limit Line
w/ 25' Jib Erected
RADIUS IN FEET
CAUTION:
Do not operate crane booms, jib extensions, any accessories
or loads within 10 ft (3m) of live power lines or other
conductors of electricity.
Jib and boom capacities shown are maximum for each section.
Do not exceed capacities at reduced radii.
Load ratings shown on the appropriate charts are maximum
allowable loads with the crane mounted on a factory-approved truck
and all outriggers at either full span or at mid span range and set on
a firm level surface so that the crane is level and all tires are
suspended.
Always level the crane with the level indicator located on the crane.
The operator must reduce load to allow for factors such as wind,
ground conditions, operating speeds and their effects on freely
suspended loads.
Overloading this crane may cause structural collapse or instability.
Weights on any accessories attached to the boom or loadline must
be deducted from the load chart capacities.
Do not exceed jib capabilities at any reduced boom lengths.
Do not deadhead lineblock against boom tip when extending boom
or winching up.
Keep at least three wraps of loadline on drum at all times.
Use only specified cable with this machine.
NOTE:
1. Operate with jib by radius when main
boom is fully extended. If necessary
increase boom angle to maintain loaded
radius.
2. Operate with jib by boom angle when
main boom is not fully extended. Do not
exceed rated jib capacities at any
reduced boom lengths.
SERIES 13100A
WITH
25-44 ft JIB/
FULL-SPAN
OUTRIGGER 20 ft
LOADLINE EQUIPMENT
DEDUCT
Downhaul weight...........150 lb (68
One sheave block .......266 lb (120
Two sheave block........350 lb (159
Three sheave block.....575 lb (261
kg)
kg)
kg)
kg)
Load Chart Rating: Series 13100A (30.5 m) Boom with 25-44 ft (7.62 m 13.4 m) Jib / Full-Span Outrigger 20 ft (6.0 m)
29 TO 100 ft (8.83 30.48 m) BOOM RATED LOADS WITHOUT JIB
LOADED LOADED
RADIUS BOOM
ANGLE
(ft)
(deg)
1300A
5
8
10
12
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
29 ft
BOOM
(lb)
79.5
73
68.5
65
57
46
29
* 60,000
44,000
36,900
31,900
26,400
20,100
14,800
7,900
LOADED
BOOM
ANGLE
(deg)
44 ft
BOOM (lb)
79
76.5
74
69.5
62.5
55
46.5
36
22
29,100
29,000
28,600
24,600
19,000
15,350
12,300
9,700
7,700
4,100
BOOM
LENGTH
(ft)
29
44
58
72
86
100
LOADED
BOOM
ANGLE
(deg)
58 ft
BOOM (lb)
78.5
75.5
70.5
65
59
53
46
38.5
29
15
28,600
23,500
18,050
14,600
12,150
10,000
8,050
6,500
5,200
4,200
2,250
LOADED
BOOM
ANGLE
(deg)
C
72 ft
BOOM (lb)
79.5
75.5
71
66.5
62
57.5
52.5
47
40.5
33.5
24.5
10
22,900
17,450
14,050
11,700
9,900
8,300
6,700
5,450
4,400
3,600
2,950
2,100
1,100
25 44 ft JIB STOWED
LOADED
BOOM
ANGLE
(deg)
78.5
75.5
71.5
68
64
60
56
52
47.5
42
36.5
29.5
21
D
86 ft
BOOM (lb)
16,300
13,700
11,350
9,600
8,250
6,900
5,600
4,600
3,800
3,100
2,550
2,100
1,650
LOADED
BOOM
ANGLE
(deg)
80
77.5
75
72
69
66
62
59
55.5
51.5
47.5
43
38.5
33
26.5
17.5
100 ft
BOOM
(lb)
10,650
10,450
10,000
9,400
8,050
7,000
5,750
4,700
3,900
3,250
2,700
2,200
1,800
1,450
1,100
750
25 ft JIB
(lb)
78
76
75
71
69
67
64
62
59
56
52.5
49.5
45
42
5,100
5,100
4,950
4,450
4,150
3,850
3,550
3,200
2,500
2,100
1,650
1,250
900
550
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
LOADED
BOOM
ANGLE
(deg)
44 ft JIB
(lb)
78
76
74
72
70.5
68.5
66.5
64.5
62
59.5
57.5
55
52.5
48.5
45.5
2,800
2,650
2,600
2,500
2,500
2,350
2,250
2,150
2,050
1,950
1,650
1,400
1,100
850
600
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual cranes load chart, operating instructions and
other instructional plates must be read and understood prior to operating the crane.
capacities
Load Chart Rating: Series 13100A (30.5 m) Boom with 25-44 ft (7.62 m-13.4 m) Jib / Mid-Span Outrigger 14 ft (4.3 m)
National Crane will send you a chart on request or you may secure needed load rating information through your nearest National
Crane dealer.
160
2nd Jib
44
80
70
65.5
140
1st Jib
25
120
Stability Limit
Line w/ 150 lb
Block
100
60
86
D
50
72
58
80
44
40
60
Do not move
unloaded boom
beyond limit line.
Stability Limit
Line w/ 150 lb
Block
30
29
HEIGHT IN FEET
100
40
20
10
20
-10
0
Operating radius
from C/L rotation
with unloaded boom
20
40
60
80
RADIUS IN FEET
SERIES 13100A
WITH
25- 44 ft JIB /
MID-SPAN
OUTRIGGER 14 ft
CAUTION:
Do not operate crane booms, jib extensions, any
accessories or loads within 10 ft (3m) of live power lines or
other conductors of electricity.
Jib and boom capacities shown are maximum for each section.
Do not exceed capacities at reduced radii.
Load ratings shown on the load rating charts are maximum
allowable loads with the outriggers properly extended and the
outrigger lock pins engaged on a firm, level surface and the crane
leveled and mounted on a factory recommended truck.
Always level the crane with the level indicator located on the crane.
The operator must reduce load to allow for factors such as wind,
ground conditions, operating speeds and their effects on freely
suspended loads.
Overloading this crane may cause structural collapse or instability.
Weights on any accessories attached to the boom or loadline must
be deducted from the load chart capacities.
Do not exceed jib capabilities at any reduced boom lengths.
Do not deadhead lineblock against boom tip when extending boom
or winching up.
Keep at least three wraps of loadline on drum at all times.
Use only specified cable with this machine.
NOTE:
1. Operate with jib by radius when main
boom is fully extended. If necessary
increase boom angle to maintain loaded
radius.
2. Operate with jib by boom angle when
main boom is not fully extended. Do not
exceed rated jib capacities at any
reduced boom lengths.
LOADLINE EQUIPMENT
DEDUCT
Downhaul weight...........150 lb (68
One sheave block .......266 lb (120
Two sheave block........350 lb (159
Three sheave block.....575 lb (261
kg)
kg)
kg)
kg)
Load Chart Rating: Series 13100A (30.5 m) Boom with 25-44 ft (7.62 m-13.4 m) Jib / Mid-Span Outrigger 14 ft (4.3 m)
29 TO 100 ft (8.83 30.48 m) BOOM RATED LOADS WITHOUT JIB
LOADED
RADIUS
(ft)
LOADED
BOOM
ANGLE
(deg)
29 ft
BOOM
(lb)
5
8
10
12
15
20
25
30
35
40
45
50
55
60
65
70
79
72.5
68.5
65
57.5
45
28
* 60,000
41,600
35,100
30,500
23,950
13,000
8,100
5,400
LOADED
BOOM
ANGLE
(deg)
44 ft
BOOM (lb)
79
76.5
73.5
69.5
62
55
46.5
36
22.0
29,100
29,000
28,600
24,600
13,900
8,900
6,050
4,150
2,850
2,350
LOADED
BOOM
ANGLE
(deg)
58 ft
BOOM (lb)
78.5
75.5
70
64
58.5
53
45.5
38
29
14.5
27,000
22,100
14,450
9,400
6,500
4,600
3,300
2,350
1,600
1,000
LOADED
BOOM
ANGLE
(deg)
79
75
70
66
61
56.5
51
46
41
33
C
72 ft
BOOM (lb)
21,500
14,950
9,750
6,750
4,950
3,600
2,600
1,850
1,250
800
LOADED
BOOM
ANGLE
(deg)
78
74
70.5
67
63
59
55
51
46.5
D
86 ft
BOOM (lb)
14,950
10,200
7,050
5,150
3,850
2,900
2,050
1,450
900
LOADED
BOOM
ANGLE
(deg)
80
77.5
74.5
71
67.5
64
61
57
54.5
51
100 ft
BOOM
(lb)
10,650
10,200
7,200
5,300
4,000
3,000
2,200
1,600
1,000
650
30
35
40
45
50
55
60
65
70
77.5
75.5
73.5
70.5
66
63
25 ft JIB
(lb)
5,100
5,100
3,750
2,700
1,250
700
LOADED
BOOM
ANGLE
(deg)
44 ft JIB
(lb)
79.5
78
75.5
74
70
67.5
65
62.5
2,800
2,650
2,600
2,400
1,900
1,400
900
550
900
BOOM
LENGTH
(ft)
29
44
58
72
86
100
25 44 ft JIB STOWED
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual cranes load chart, operating instructions and
other instructional plates must be read and understood prior to operating the crane.
1300A
capacities
Load Chart Rating: Series 13110A (33.5 m) Boom with 25-44 ft (7.62 m-13.4 m) Jib / Full-Span Outrigger 20 ft (6.0 m)
National Crane will send you a chart on request or you may secure needed load rating information through your nearest National
Crane dealer.
80
2nd Jib
44
HEIGHT IN FEET
1st Jib
25
CAUTION:
Do not operate crane booms, jib extensions, any
accessories or loads within 10 ft (3m) of live power lines or
60
other conductors of electricity.
140
Do not move
Jib and boom capacities shown are maximum for each section.
unloaded
boom
50
Do not exceed capacities at reduced radii.
beyond limit line.
47
Load ratings shown on the appropriate charts are maximum
120
allowable loads with the crane mounted on a factory-approved
truck and all outriggers at either full span or at mid span range and
100
set on a firm level surface so that the crane is level and all tires are
suspended.
40
80
Always level the crane with the level indicator located on the
Stability
Limit
crane.
Line w/ 150 lb
30
Block
The operator must reduce load to allow for factors such as wind,
60
ground conditions, operating speeds and their effects on freely
20
suspended loads.
40
Overloading this crane may cause structural collapse or instability.
Structural Limit
Line w/ 44' Jib
Weights on any accessories attached to the boom or loadline must
10
Erected
be deducted from the load chart capacities.
20
Do not exceed jib capabilities at any reduced boom lengths.
C
D 0
Do not deadhead lineblock against boom tip when extending boom
0
or winching up.
80
100
120
Structural Limit
Line
Keep at least three wraps of loadline on drum at all times.
FEET
Er
w/ 25' Jibected
Use only specified cable with this machine.
160
70
110
94
78
62
46
32
-10
20
Operating radius
from C/L o
rtation
with unloaded boom
40
60
RADIUS IN
NOTE:
1. Operate with jib by radius when main
boom is fully extended. If necessary
increase boom angle to maintain loaded
radius.
2. Operate with jib by boom angle when
main boom is not fully extended. Do not
exceed rated jib capacities at any
reduced boom lengths.
SERIES 13110A
WITH
25-44 ft JIB /
FULL-SPAN
OUTRIGGER 20 ft
LOADLINE EQUIPMENT
DEDUCT
Downhaul weight...........150 lb (68
One sheave block .......266 lb (120
Two sheave block........350 lb (159
Three sheave block.....575 lg (261
kg)
kg)
kg)
kg)
Load Chart Rating: Series 13110A (33.5 m) Boom with 25 ft-44 ft (7.62 m-13.4 m) Jib / Full-Span Outrigger 20 ft (6.0 m)
32 ft 110 ft BOOM RATED LOADS WITHOUT JIB
LOADED
LOADED BOOM
RADIUS ANGLE
(ft)
(deg)
5
8
10
12
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
78.5
74.5
70.5
66.5
60
48.5
34
1300A
32 ft
BOOM
(ft)
* 60,000
43,000
35,900
30,900
25,500
19,450
14,900
6,300
LOADED
BOOM
ANGLE
(deg)
46 ft
BOOM
(ft)
77.5
75
71
63.5
56
48
38.5
27
29,100
28,900
24,000
18,450
14,800
12,150
9,600
7,600
3,250
BOOM
LENGTH
(ft)
29
44
58
72
86
100
LOADED
BOOM
ANGLE
(deg)
B
62 ft
BOOM
(ft)
77
72
67
61.5
56
49.5
43.5
36
26
8.5
23,000
17,550
14,100
11,650
9,850
7,950
6,350
5,100
4,050
2,650
1,450
LOADED
BOOM
ANGLE
(deg)
25 44 ft JIB STOWED
77
73
69
64.5
60.5
56
51.5
46
40
33.5
25.5
13
C
78 ft
BOOM
(ft)
17,000
13,600
11,200
9,450
8,100
6,600
5,350
4,300
3,500
2,850
2,250
1,750
LOADED
BOOM
ANGLE
(deg)
77.5
74
70.5
67
64
60
56
52
48
43
38
32
25
15
D
94 ft
BOOM
(ft)
13,300
10,950
9,200
7,850
6,800
5,550
4,550
3,700
3,000
2,450
1,950
1,500
1,100
750
LOADED
BOOM
ANGLE
(deg)
77
74
71.5
69
66
63
59.5
56
52.5
49
45
41
36
31
7,950
6,300
5,950
5,700
5,400
4,750
3,900
3,200
2,600
2,100
1,650
1,250
900
600
LOADED
LOADED BOOM
RADIUS ANGLE
(ft)
(deg)
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
76.5
75
73
71
69
66.5
64
61.5
59
56
53.5
50.5
25 ft
JIB
(ft)
4,200
4,100
4,000
3,850
3,600
3,300
3,050
2,500
2,000
1,550
1,100
700
LOADED
BOOM
ANGLE
(deg)
44 ft
JIB
(ft)
76.5
75.5
74
72.5
70.5
68.5
66.5
64.5
62
60
57
54.5
51.5
2,500
2,500
2,500
2,500
2,350
2,250
2,150
2,050
1,900
1,800
1,400
1,050
650
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual cranes load chart, operating instructions and
other instructional plates must be read and understood prior to operating the crane.
capacities
Load Chart Rating: Series 13110A (33.5 m) Boom with 25-44 ft (7.62 m-13.4 m) Jib / Mid-Span Outrigger 14 ft (4.3 m)
HEIGHT INFEET
National Crane will send you a chart on request or you may secure needed load rating information through your nearest National
Crane dealer.
CAUTION:
80
2nd Jib
Do not operate crane booms, jib extensions, any
160
44
70
accessories or loads within 10 ft (3m) of live power lines
64
or other conductors of electricity.
1st Jib
25
140
Jib and boom capacities shown are maximum for each section.
Stability
Limit
Line w/ 150 lb
Do not exceed capacities at reduced radii.
Block
Load ratings shown on the load rating charts are maximum
120
110
allowable loads with the outriggers properly extended and the
60
outrigger lock pins engaged on a firm, level surface and the
94
D
54
100
Do not move
crane leveled and mounted on a factory recommended truck.
unloaded
boom
50
78
Always level the crane with the level indicator located on the
beyond limit line.
C
80
crane.
62
The operator must reduce load to allow for factors such as
B
40
wind, ground conditions, operating speeds and their effects on
60
46
A
freely suspended loads.
30
Overloading this crane may cause structural collapse or
32
40
instability.
Structural Limit
Line
20
w/ 44' Jibected
Er
Weights on any accessories attached to the boom or loadline
10
must be deducted from the load chart capacities.
20
Structural Limit
Line
Do not exceed jib capabilities at any reduced boom lengths.
0
w/ 25' Jibected
Er
-10
Do not deadhead lineblock against boom tip when extending
0
boom or winching up.
Operating radius0
20
40
60
80
rtation
from C/L o
Keep at least three wraps of loadline on drum at all times.
with unloaded boom
RADIUS IN FEET
Use only specified cable with this machine.
SERIES 13110A
WITH
25-44 ft JIB /
MID-SPAN
OUTRIGGER 14 ft
LOADLINE EQUIPMENT
DEDUCT
Downhaul weight...........150 lb (68
One sheave block .......266 lb (120
Two sheave block........350 lb (159
Three sheave block.....575 lb (261
kg)
kg)
kg)
kg)
NOTE:
1. Operate with jib by radius when main boom
is fully extended. If necessary increase
boom angle to maintain loaded radius.
2. Operate with jib by boom angle when main
boom is not fully extended. Do not exceed
rated jib capacities at any reduced boom
lengths.
Load Chart Rating: Series 13110A (33.5 m) Boom with 25-44 ft (7.62 m-13.4 m) Jib / Mid-Span Outrigger 14 ft (4.3 m)
LOADED
LOADED BOOM
RADIUS ANGLE
(ft)
(deg)
5
8
10
12
15
20
25
30
35
40
45
50
55
60
65
70
78.5
74.5
70.5
66.5
60
48.5
34
5,300
BOOM
ANGLE
(deg)
46 ft
BOOM
(ft)
77.5
75
71
63.5
56
48
38.5
26.5
34,100
29,200
24,000
13,950
8,900
6,150
4,300
3,050
2,100
BOOM
ANGLE
(deg)
77
72
66.5
61.5
55.5
49.5
43
35
25
8
62 ft
BOOM
(ft)
BOOM
ANGLE
(deg)
20,000
14,400
9,600
6,500
4,650
3,350
2,350
1,650
1,000
550
76.5
72
68.5
64
59.5
55
50
45
39
78 ft
BOOM
(ft)
14,900
9,600
6,750
4,850
3,550
2,550
1,800
1,200
750
BOOM
ANGLE
(deg)
76.5
73
69.5
66
62.5
58.5
55
50.5
D
94 ft
BOOM
(ft)
10,000
6,900
5,050
3,700
2,700
1,950
1,350
850
LOADED
BOOM
ANGLE
(deg)
76.5
73.5
70.5
67
64
61
58
54.5
110 ft
BOOM
(ft)
7,250
5,350
3,900
2,850
2,050
1,450
950
500
76.5
75
73
71
69
66.5
25 ft
JIB
(ft)
4,200
4,100
2,650
1,800
1,200
700
LOADED
BOOM
ANGLE
(deg)
44 ft
JIB
(ft)
76.5
75.5
74
72.5
70.5
68.5
2,500
2,500
2,500
2,000
1,400
950
500
BOOM
LENGTH
(ft)
29
44
58
72
86
100
25 44 ft JIB STOWED
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual cranes load chart, operating instructions and
other instructional plates must be read and understood prior to operating the crane.
1300A
accessories
Radio Remote Controls
Eliminate the handling and maintenance concerns that accompany cabled
remotes. Operate to a range of about 250 ft (76 m), varying with conditions.
10
NB4R
One-Person Basket
Strong but lightweight steel basket with 300 lb (139-kg) capacity, gravity hung
with swing lock and full body harness.
B1-S
2B1-S (for dual locking baskets)
BSA-1
BSA-R1 (provides rotation)
Air Conditioning
Back of cab mounted, self contained modular unit with in cab cool air outlets.
Requires 130+ amp. chassis alternator.
AC
WDRI
LLI
ICORC
SFO
OMA-3
Hour Meter
Hour meter in truck cab to record crane operation hours.
HRM
HBSB
SSC
1300A
SDD
SOM
dimensions specifications
Dimensions Specifications
1300A
11
Regional Headquarters
Americas
Manitowoc, Wisconsin, USA
Asia Pacific
Shanghai, China
Singapore
Regional Offices
Americas
Brazil
Alphaville
Netherlands
Breda
China
Beijing
Mexico
Monterrey
Poland
Warsaw
Xian
Portugal
Alfena
Czeck Republic
Netvorice
Tel: +420 317 78 9313
Fax: +420 317 78 9314
France
Baudemont
Tel: +33 385 28 2589
Fax: +33 385 28 0430
Cergy
Tel: +33 130 31 3150
Fax: +33 130 38 6085
Decines
Tel: +33 472 81 5000
Fax: +33 472 81 5010
Germany
Langenfeld
Korea
Seoul
Tel: +82 2 3439 0400
Fax: +82 2 3439 0405
Lisbon
Philippines
Makati City
Russia
Moscow
Factories
U.S.A.
Manitowoc
Shady Grove
U.A.E.
Dubai
Brazil
France
U. K.
Middlesex
Tel: +44 1 895 43 0053
Fax: +44 1 895 45 9500
Sunderland
Alphaville
Charlieu
La Clayette
Moulins
India
Calcutta
Puna
Italy
Germany
Asia Pacific
Australia
Melbourne
Tel: +61 3 9 336 1300
Fax: +61 3 9 336 1322
Fnzeres
Italy
Parabiago
Sydney
Zhangjiagang
Hungary
Budapest
Niella Tanaro
Wilhelmshaven
Portugal
China
2007 MANITOWOC
Printed in USA
Form No. 1300A
0907 / 2M
www.manitowoccranegroup.com