Академический Документы
Профессиональный Документы
Культура Документы
Version 2.0-10
Contents
Revision 2.0-00 (September 30, 2011) ........................................................................................... 2
Revision 2.0-01 (October 24, 2011) ............................................................................................... 9
Revision 2.0-02 (November 4, 2011) ............................................................................................. 9
Revision 2.0-03 (November 28, 2011) ........................................................................................... 9
Revision 2.0-04 (January 6, 2012) ................................................................................................ 10
Revision 2.0-05 (May 31, 2012) ................................................................................................... 16
Revision 2.0-06 (July 5, 2012) ...................................................................................................... 17
Revision 2.0-07 (October 1, 2012) ............................................................................................... 18
Revision 2.0-08 (December 3, 2012) ........................................................................................... 23
Revision 2.0-09 (March 20, 2013) ............................................................................................... 25
Revision 2.0-10 (November 20, 2013) ........................................................................................ 27
Important Upgrade Notes for 1.x to 2.0 ........................................................................................ 32
SUMMARY OF FILES IN THIS RELEASE .............................................................................. 36
Page | 1
This document provides the Release Notes for the RSLogix 5000 Add-On Instructions and
FactoryTalk View SE and ME Graphic Symbols and Faceplates that make up the PlantPAx
Library. This version of the Release Notes document (dated November 20, 2013) is for Release
2.0-10 of the Library.
Page | 2
Val_Cmd:
Val_Fdbk:
Val_Sts:
Val_State:
Val_Fault:
These are in addition to the previously added Val_Notify, the current alarm level and
acknowledgement status, used for animating alarm elements.
5. Analog Input Changes, Analog Input Graphic Symbols: Consolidated, Modified, Added,
Moved
Analog Input graphic symbols have been moved to their own Global Objects (.ggfx) file.
Furthermore, the P_AIn graphic symbol has been modified to work with P_AInAdv, P_AInDual,
and the new P_AInMulti. Several Analog Input graphic symbols have been added for the P_AIn
family of instructions, including some mini-trend objects.
The number of Analog Input graphic symbols carried over from library 1.5 has been reduced by
using a common interface. The graphic symbols only show items that are common to all
Analog Input instructions (P_AIn, P_AInAdv, P_AInDual and the new P_AInMulti). Which
faceplate to call up when clicking the symbol is determined by a new Local Tag in each
instruction called Inf_Type (Info: AOI Type). When the symbol is clicked, the Inf_Type is
read and used to build the name of the faceplate display to call up
Graphic symbols from version 1.5 for P_AInAdv and P_AInDual have been deleted.
Page | 3
A number of Analog Input graphic symbols have been modified to use a triangle to indicate the
PV rather than varying the height of the bar graph. This is to ensure the alarm colors are visible
when an input is in the low or low-low alarm condition.
Analog Input instructions now have a capture capability to record the lowest and highest
excursions of the PV. The capture range is now shown as a gray band on the Trend tab of the
faceplate, and a Clear Capture button has been added to reset the capture range minimum and
maximum back to the current PV value.
6. Mode and Alarm Global Objects Moved
Both Mode global objects and Alarm global objects used on faceplates have been moved to their
own Global Objects files. The library 2.0 faceplates are set up for this, but user-developed
displays that use Mode or Alarm indicators may require pulling in the new symbols from the new
locations.
7. Icons, Breadcrumbs Are Now Images
Breadcrumbs and other indicators (high, low, high-high, low-low, deviation, clamping, etc.) are
now drawn as bitmaps (in the Images folder of the FTView project). Users can now modify
these icons simply using Microsoft Windowss Paint utility, rather than having to redraw them
in FTView Studio.
Note: Since the P_Mode instruction now has a configurable default mode [see item 11], it uses
several new mode indicators, including those for Program (Oper default), Program (Prog
default), Operator (Oper default) and Operator (Prog default). The images used when in the
default mode (e.g., Oper when Oper default) are all background (invisible) bitmaps, causing
the mode symbol to be invisible when in the default mode. To have the mode indicator on
graphic symbols ALWAYS visible, simply copy the bitmaps from the Prog / Oper default and
Oper / Prog default images into the Prog / Prog default and Oper / Oper default image files.
8. AOI Definition and View Enhancements Require Logix 18 / View 6.0
The 2.0 Library takes advantage of new Add-On Instruction enhancements in RSLogix 5000
software and Logix controller firmware, and new features in FactoryTalk View SE and ME
software. Version 18 or later of Logix and Version 6.0 or later of View are required.
Since Version 18 of Logix is required, the L_CPU_16 and L_CPU_17 instructions are removed.
See the items on Parameter Aliasing and Instruction Signatures, below.
In concert with the Parameter Alias changes, the flow of code in each AOI was adjusted to align
with the most common signal flow and avoid multiple scans to solve the logic.
Page | 4
Page | 5
documented poorly. The new options are more explicit and keep the device fault configuration
completely separate from the alarm configuration.
15. Disable Only in Maintenance Mode
Instructions which can be Disabled now require Maintenance Mode (not just Maintenance
security level) to disable or enable the device. This is to prevent an accidental click of the
Disable button (say, when the user is attempting to click the Maintenance Mode button) from
shutting down the device.
16. Parameter Aliasing
All Add-On Instructions containing P_Mode or P_Alarm instances now use Parameter Aliasing
(new in RSLogix 5000 Version 18) to pass parameters to the contained P_Mode and P_Alarm
instances. This reduces the mapping logic in the outer AOI significantly.
17. Instruction Signatures
All Add-On Instructions in 2.0 are signed. The instructions generally are not locked down and
can be viewed and modified, but the instruction signature (new for RSLogix 5000 Version 18)
must be removed to make changes. The instruction signatures allow Rockwell Automation
Technical Support personnel to determine if an instruction has been modified.
18. New Breadcrumbs
Several new breadcrumb indicators and the logic to drive them were added:
Not Ready: displayed when the device cannot be commanded, as in a Motor not ready to
start.
Maintenance Bypass: displayed when the device has a feedback enabled by Engineering
but not used by Maintenance, or when a Substitute PV is in use, or when bypassable
Interlocks/Permissives are bypassed.
Alarm Inhibited: displayed when the device has any alarm that is Suppressed, Disabled or
Inhibited.
19. Operator Reset and Acknowledge All Button
Instructions that have alarms now have an Operator Reset and Acknowledge All button on the
home tab of the faceplate to make resetting and acknowledging alarms easier and faster.
20. P_Alarm Updates
In order to more closely align with our interpretation of ANSI/ISA 18.2-2009 (an alarm
management standard published by ISA see http://www.isa.org/standards), P_Alarm was
modified as follows:
If an alarm is active and Program logic Inhibits the alarm (PCmd_HiHiInhibit, for
example), the alarm is no longer automatically reset and acknowledged. Now, if the
Page | 6
alarm existed before the logic Inhibited it, the Operator must still reset and/or
acknowledge it.
An alarm configured with no acknowledgement required now appears unacknowledged
for five seconds, then acknowledges itself. This was added to give a brief flashing
indication to the operator for a new alarm and to work with FactoryTalk View ME and
legacy alarm systems which always require acknowledge (not configurable).
The minimum duration configuration and timer have been removed. Only the Analog
Inputs and the Discrete Input used it, and it has been replaced with On Delay and Off
Delay.
The alarm minimum ON time has been made configurable. Previously, the minimum ON
time was fixed at five seconds and was only used to ensure the alarm was seen by the
alarm server polling. Now the user can configure the alarm minimum ON time to a
longer time to keep an alarm in the Alarm Summary long enough for the Operator to
perform the required actions to resolve it.
Page | 7
P_AInDual
P_DoseFM
P_DoseWS
P_VSD
P_Intlk
P_Perm
P_Reset
P_ResInh
P_RunTime
Page | 8
Page | 9
2.0-03 Changed object GO_AlarmDisplay to text, polygon, panel (was MSI) because
msi in ME cannot accept GO parameters that have spaces
2.0-02
2.0-02
Changed the Loop Mode, Invalid Configuration, and Comm Failure Icons to
use images. Also, made all of the images transparent
Renamed the objects in the SAMA diagram so they would be easier to find
using the Color Tool.
Page | 10
(RA-BAS) P_AOutFaceplate.gfx
2.0-02
(RA-BAS) P_nPosFaceplate.gfx
2.0-01
(RA-BAS) P_DoseFMFaceplate.gfx
2.0-01
Converted the Comm Bad and Comm Uncertain icons by the rate and
quantity displays to images. Changed the SP display to the standard by
making the font bold and the back color dark gray.
(RA-BAS) P_DoseWSFaceplate.gfx
(RA-BAS) L_RedunHelp.gfx
(RA-BAS) Logix Graphics
Library.ggfx
2.0-01
Changed the SP display to the standard by making the font bold and the
back color dark gray.
Changed the button icons on the help display to use the global objects
2.0-01
2.0-01
(RA-BAS) Common
Faceplate Objects.ggfx
2.0-01
(RA-BAS) Process
Graphics Library.ggfx
2.0-01
(RA-BAS) P_AlarmHelp.gfx
2.0-01
(RA-BAS) P_DInFaceplate.gfx
(RA-BAS) P_Fanout5Faceplate.gfx
(RA-BAS) P_FanoutFaceplate.gfx
(RA-BAS) P_PermFaceplate.gfx
(RA-BAS) P_IntlkFaceplate.gfx
2.0-01
(RA-BAS) P_IntlkPermHelp.gfx
2.0-01
2.0-01
Renamed the objects in the SAMA diagram so they would be easier to find
using the Color Tool. Also, changed a visibility animation on the IO Fault
Indicator that was configured as "{#1.Cfg_ShedOnIOFault} and
{#1.Cfg_ShedOnIOFault}". This was changed to simply
"{#1.Cfg_ShedOnIOFault}"
On the Alarm Config Tab, the object "GroupSeverityLinesForHiddenAlarms"
had a broken link object. This was correctly pointed to the global object
"GO_SeverityBGLines" from the global object file "(RA-BAS) Process Alarm
Objects"
2.0-01
2.0-01
2.0-01
2.0-01
Changed the Reset button to use image references rather than imported
bitmaps. Also changed the Reset Button to set the tag rather than act as a
momentary button. Modified faceplate to use the new global object
permissive indicator
Changed the Interlock and Permissive indicators to use the new indicators
from the global object help file. Shuffled objects on the screen as needed
Page | 11
2.0-01
(RA-BAS) P_VSDHelp.gfx
2.0-01
(RA-BAS) P_MotorRevHelp.gfx
2.0-01
(RA-BAS) P_Motor2SpdHelp.gfx
2.0-01
(RA-BAS) P_MotorHelp.gfx
2.0-01
(RA-BAS) P_ValveSOHelp.gfx
2.0-01
(RA-BAS) P_D4SDHelp.gfx
2.0-01
(RA-BAS) P_ValveMPHelp.gfx
2.0-01
(RA-BAS) P_DOutHelp.gfx
2.0-01
Changed the button icons on the help display to use the global objects.
Shifted components below the Permissive/Interlock group by 15 pixels due
to the change in size of the permissive/interlock group. Added 15 pixels to
the screen height
Changed the button icons on the help display to use the global objects.
Shifted components below the Permissive/Interlock group by 15 pixels due
to the change in size of the permissive/interlock group. Added 15 pixels to
the screen height
Shifted components below the Permissive/Interlock group by 15 pixels due
to the change in size of the permissive/interlock group. Added 15 pixels to
the screen height
(RA-BAS) P_nPosHelp.gfx
2.0-01
(RA-BAS) P_AOutHelp.gfx
(RA-BAS) P_MotorHOHelp.gfx
(RA-BAS) P_ValveCHelp.gfx
(RA-BAS) P_ValveHOHelp.gfx
(RA-BAS) P_ValveMOHelp.gfx
2.0-01
(RA-BAS) Logix
FacePlate Objects.ggfx
2.0-01
2.0-01
2.0-01
2.0-01
2.0-01
Page | 12
(RA-BAS) L_CPUFaceplate.gfx
2.0-01
(RA-BAS) Process
Faceplate Objects.ggfx
2.0-01
(RA-BAS) P_AIn
Graphics Library.ggfx
2.0-01
(RA-BAS-ME) P_AOutFaceplate.gfx
2.0-01
2.0-02
2.0-02
Page | 13
(RA-BAS-ME) P_nPos
Graphics Library.ggfx
2.0-01
2.0-02
Page | 14
(RA-BAS-ME) P_nPosFaceplate.gfx
2.0-02
(RA-BAS-ME) P_DoseFMFaceplate.gfx
2.0-02
(RA-BAS-ME) P_DoseWSFaceplate.gfx
(RA-BAS-ME) L_RedunHelp.gfx
(RA-BAS-ME) Process
Graphics Library.ggfx
(RA-BAS-ME) P_AlarmHelp.gfx
2.0-02
(RA-BAS-ME) P_PermFaceplate.gfx
(RA-BAS-ME) P_IntlkFaceplate.gfx
2.0-02
(RA-BAS-ME)
P_IntlkPerm-Help.gfx
(RA-BAS-ME) Process
Help Objects.ggfx
2.0-01
(RA-BAS-ME) P_ValveCHelp.gfx
(RA-BAS-ME)
P_ValveMO-Help.gfx
(RA-BAS-ME) P_nPosHelp.gfx
(RA-BAS-ME) P_DOutHelp.gfx
(RA-BAS-ME) P_ValveMPHelp.gfx
(RA-BAS-ME) P_D4SDHelp.gfx
(RA-BAS-ME) P_ValveSOHelp.gfx
(RA-BAS-ME) P_MotorHelp.gfx
(RA-BAS-ME)
P_Motor2Spd-Help.gfx
(RA-BAS-ME)
P_MotorRev-Help.gfx
(RA-BAS-ME) P_VSDHelp.gfx
(RA-BAS-ME) Built-In
2.0-01
Changed the Reset button to use image references rather than imported
bitmaps.
Changed the Reset Button to Interlocked btn rather than a momentary
button.
Modified faceplate to use the new global object Interlocked indicator
Changed the Interlock and Permissive indicators to use the new indicators
from the global object help file. Shuffled objects on the screen as needed
Changed the Permissive and Interlock Indicators to use the new smaller
images and added the OK/Bypassed state.
Changed
GO_ModeHelp_HMOPO\GO_ModeHelp_MPO\ButtonHelpMode\ButtonHel
p so that in button Appearance 'Border uses back color' is checked
Changed ..\GroupCommands\Panel4 width from 410 to 460
2.0-01
2.0-01
2.0-01
2.0-01
2.0-01
2.0-01
2.0-01
2.0-01
2.0-01
2.0-01
2.0-01
2.0-01
2.0-02
2.0-02
2.0-01
2.0-01
Page | 15
PIDE-Help.gfx
(RA-BAS-ME) P_AInAdvHelp.gfx
(RA-BAS-ME) P_AInDualHelp.gfx
(RA-BAS-ME) P_AIn-Help
(RA-BAS-ME) P_AInMultiHelp.gfx
(RA-BAS-ME) P_DoseFMHelp.gfx
(RA-BAS-ME) P_DoseWSHelp.gfx
(RA-BAS-ME) Process
Faceplate Objects.ggfx
2.0-01
2.0-01
2.0-01
2.0-01
2.0-01
2.0-01
2.0-03
(RA-BAS-ME) Logix
FacePlate Objects.ggfx
2.0-02
2.0-01
2.0-01 Release
P_D4SD
2.0-02 Release
P_Din
2.0-01 Release
P_DOut
2.0-02 Release
Page | 16
P_Motor
2.0-02 Release
P_Motor2Spd
2.0-03 Release
P_MotorHO
2.0-02 Release
P_MotorRev
2.0-03 Release
P_ValveHO
2.0-02 Release
P_ValveMO
2.0-04 Release
P_ValveSO
2.0-03 Release
P_VSD
2.0-03 Release
Modified Hand Mode logic to track run feedback regardless of Not Ready
status. Modified checking of Not Ready status in generation of Out_Start,
Out_Run. Modified logic to allow Operator Commands to reset shed
conditions when Cfg_OCmdResets is enabled.
Modified Hand Mode logic to track run feedback regardless of Not Ready
status. Modified Permissive condition handling for Rdy_RunFast,
Rdy_RunSlow. Modified handling of command retriggering in Maintenance
Mode. Modified logic to allow Operator Commands to reset shed
conditions when Cfg_OCmdResets is enabled.
Corrected parameter description to show proper enumeration value for Fail
to Trip. Modified logic to clear Cfg_HasIntlkTripAlm and
Cfg_HasTripFailAlm if Cfg_HasTrip is 0 (no Trip capability).
Modified Hand Mode logic to track run feedback regardless of Not Ready
status. Modified Permissive condition handling for Rdy_RunFwd,
Rdy_RunRev. Modified handling of command retriggering in Maintenance
Mode. Modified logic to allow Operator Commands to reset shed
conditions when Cfg_OCmdResets is enabled.
Corrected parameter description to show proper enumeration value for Fail
to Trip. Modified logic to clear Cfg_HasIntlkTripAlm and
Cfg_HasTripFailAlm if Cfg_HasTrip is 0 (no Trip capability).
Modified Operator Command / Ready logic to improve recovery from valve
failures. Improved valve simulation logic. Modified OCmd_Stop and
Rdy_Stop logic which checks valve stopped status.
Modified Operator Command / Ready logic to improve recovery from valve
failures. Improved valve simulation logic. Modified handling of Permissive
conditions.
Modified checking of Not Ready status in generation of Out_Start,
Out_Run. Modified logic to allow Operator Commands to reset shed
conditions when Cfg_OCmdResets is enabled, including handling of
Operator and Program Keep configuration. Modified Out_Stop logic to
prevent locking out drive which sets Inp_Ready to 0 when stop asserted.
(RA-BAS-ME) Built-In
Autotune-Faceplate
Page | 17
2.0-02 Release
L_TaskMon
2.0-01 Release
P_AIn
2.0-01 Release
P_AInAdv
2.0-01 Release
P_AInDual
2.0-01 Release
P_AInMulti
2.0-01 Release
P_Alarm
2.0-01 Release
P_AOut
2.0-01 Release
Modified to use P_Alarm 2.0-01. Modified timer logic for threshold status
bits so there is not a 1-scan delay in status if timer preset is zero.
Modified to use P_Alarm 2.0-01. Modified timer logic for threshold status
bits so there is not a 1-scan delay in status if timer preset is zero.
Modified to use P_Alarm 2.0-01. Modified timer logic for threshold status
bits so there is not a 1-scan delay in status if timer preset is zero.
Modified to use P_Alarm 2.0-01. Modified timer logic for threshold status
bits so there is not a 1-scan delay in status if timer preset is zero.
Restored Edge/Level behavior selection for Program Commands (lost in
going from 1.5 to 2.0-00).
Modified to use P_Alarm 2.0-01.
P_D4SD
2.0-03 Release
P_DIn
2.0-02 Release
P_DoseFM
2.0-02 Release
P_DoseWS
2.0-02 Release
P_DOut
2.0-03 Release
Modified to use P_Alarm 2.0-01. Modified timer logic for threshold status
bits so there is not a 1-scan delay in status if timer preset is zero.
Modified to use P_Alarm 2.0-01. Modified Bump command logic to allow
operator to bump equipment even if Sts_Complete is true.
Modified to use P_Alarm 2.0-01. Modified Bump command logic to allow
operator to bump equipment even if Sts_Complete is true.
Modified to use P_Alarm 2.0-01.
P_Fanout
2.0-01 Release
P_Logic
2.0-01 Release
P_Motor
2.0-03 Release
P_Motor2Spd
2.0-04 Release
P_MotorHO
2.0-03 Release
P_MotorRev
2.0-04 Release
P_nPos
2.0-02 Release
P_PF755
2.0-00 Release
Added missing string Cfg_CV_EU to the strings displayed on the first rung
of the instructions Logic routine.
Modified logic for output on-delay and off-delay timers so there is not a 1scan delay in output when timer preset is zero.
Modified to use P_Alarm 2.0-01. Modified simulation timer logic so there is
not a 1-scan delay in status if timer preset is zero.
Modified to use P_Alarm 2.0-01. Modified simulation timer logic so there is
not a 1-scan delay in status if timer preset is zero.
Modified to use P_Alarm 2.0-01.
Modified to use P_Alarm 2.0-01. Modified simulation timer logic so there is
not a 1-scan delay in status if timer preset is zero.
Modified to use P_Alarm 2.0-01. Modified simulation timer logic so there is
not a 1-scan delay in status if timer preset is zero.
New instruction. See notes below regarding importing and using this AOI.
Page | 18
P_ValveC
2.0-02 Release
P_ValveHO
2.0-03 Release
P_ValveMO
2.0-05 Release
P_ValveMP
2.0-02 Release
P_ValveSO
2.0-04 Release
P_VSD
2.0-04 Release
In addition, several changes to displays were made. The FactoryTalk View SE and ME files
updated are:
Revision 2.0-07 SE updates:
(RA-BAS) BuiltIn
Faceplate Objects
(RA-BAS) BuiltIn
Graphics Library
(RA-BAS) Built-In PIDEFaceplate
(RA-BAS) Common
Faceplate Objects.ggfx
(RA-BAS) CommonAnalogEdit.gfx
(RA-BAS) Logix Graphics
Library.ggfx
2.0-03
2.0-02
(RA-BAS) P_DOutFaceplate.gfx
(RA-BAS) P_ValveHOHelp.gfx
(RA-BAS) P_ValveSOFaceplate.gfx
2.0-01
2.0-01
The position of the Interlock and Permissive buttons on the home page
were controlled by 'illegal' animation. Since this caused errors on XML
import, it was changed to use visibility on two different sets of buttons to
achieve the same outcome.
(RA-BAS) P_VSD
Graphics Library.ggfx
(RA-BAS) Process
Faceplate Objects.ggfx
2.0-01
Modified the code to support the PF-755. This included adding navigation
via the Inf_Type tag in CLX
Modified the multi-state indicator expressions in the Permissive and
Interlock indicators (GO_InterlockIndicator, GO_InterlockButton,
GO_PermissiveIndicator, and GO_PermissiveButton)
2.0-01
2.0-02
2.0-02
2.0-02
2.0-02
2.0-02
Added tag "HandFBFault" to the condition for displaying the Comm Bad
Icon on the CV Display
Added tag "HandFBFault" to the condition for displaying the Comm Bad
Icon on the CV Display for all of the PIDE Graphic Symbols
Added tag "HandFBFault" to the condition for displaying the Comm Bad
Icon on the Comm Display
Added additional tab page Objects. Added navigation object for the
diagnostic tab.
Added Enter Key capability. Improved code
Page | 19
(RA-BAS) Process
Graphics Library.ggfx
2.0-02
2.0-01
Added mode display for the quicks (even though these will be released
later, they are used in the Sequencer displays
2.0-03
(RA-BAS-ME) Logix
Graphics Library.ggfx
(RA-BAS-ME)
P_ValveSO-Faceplate.gfx
2.0-02
(RA-BAS-ME) P_PF755Faceplate.gfx
2.0-00
(RA-BAS-ME) Built-In
PIDE-Faceplate
(RA-BAS-ME) P_DOutFaceplate
(RA-BAS-ME) BuiltIn
Faceplate Objects
2.0-02
(RA-BAS-ME) BuiltIn
Graphics Library
2.0-01
(RA-BAS-ME) Process
Graphics Library.ggfx
2.0-02
(RA-BAS-ME) Process
Faceplate Objects.ggfx
2.0-04
(RA-BAS-ME)
P_ValveHO-Help.gfx
2.0-01
2.0-01
2.0-01
2.0-03
2.0-02
2.0-04
Added additional tab page Objects. Added navigation object for the
diagnostic tab.
Added mode display for the quicks (even though these will be released
later, they are used in the Sequencer displays)
Changed the code to support the PF-755. This included adding
PF755_Button_Faceplate to navigate to the PF755 faceplate.
Added instructional text GO_GraphicSymbolIstructions.
GO_GraphicSymbolIstructions1.
Changed the description of the L_Redun Global Object Parameter to
correctly identify the parameter. Now reads "Redundancy Tag (L_Redun)"
The position of the Interlock and Permissive buttons on the home page
were controlled by 'illegal' animation. Since this caused errors on XML
import, it was changed to use visibility on two different sets of buttons to
achieve the same outcome.
Added GO_ValveEnableButtons to EnableGroup on Maint tab
Created fp from SE Conversion.
Changed the tags Val_SpeedFdbkEUMin and Val_SpeedFdbkEUMax to
Val_SpeedEUMin and Val_SpeedEUMax
Added .HandFBFaulted to the GO Parameter for object
GO_Communication
Changed text to be "Ouput," was "Valve" on object
TabPanelGrp_Engineering2\GroupShed\TextTakeThisActionOn
Changed visibility animation to be {#1.CVFaulted} OR
{#1.HandFBFaulted}, was {#1.CVFaulted}for object
GO_ControlVariable\CVCommFailure
Changed visibility animation to be {#1.CVFaulted} OR
{#1.HandFBFaulted}, was {#1.CVFaulted} for
\PIDE_Exceptions\Image_CommBad objects
Added a graphic symbol for the Valve Stats object. Also, deleted the
unused 2nd prameter from the display command in the P_Runtime graphic
symbol. This was a leftover from previous versions that passed the object
name. Starting with 2.0, the object name is in the AOI.
Changed the Permissive and Interlock Navigation multistate indicators
(GO_InterlockIndicator, msi_Interlock, msi_Permissive,
GO_PermissiveIndicator) to use expression: if (Not {#103}) or (Not ({#102}
or {#104})) then 3
else if (Not {#102}) then 2
else {#104}
Changed GroupCommands\GroupTripHelp\Text4 to 'Trip Valve' from
'Trip Motor'
Page | 20
(RA-BAS-ME) P_VSDFaceplate.gfx
2.0-02
Items in the lists of files at the end of this document with file revisions and dates in bold text
indicate items that have changed since the previous revision.
Revision 2.0-07 Summary of Changes
Here is a summary of the changes to the Library going from Version 2.0-06 to Version 2.0-07
(new Maintenance Release).
1. New Instructions
The following new instruction and its graphic symbols and faceplates are added:
P_PF755
PowerFlex 755 Variable Frequency Drive.
IMPORTANT
This instruction depends on data structures (UDTs) and other tags in order to handle its I/O
connections and provide improved diagnostics. Therefore, it is provided as a Rung Import
(similar to L_CPU) to make it easy to get all the dependencies in place. Follow the procedure
below for importing this instruction in order to get all its diagnostic capabilities. Even though
the instruction is provided as a Rung Import, once all the dependencies are imported it can be
used in Ladder Diagram, Structured Text, or Function Block Diagram routines as easily as
P_VSD.
P_PF755 Import Procedure
The P_PF755 instruction uses In/Out Parameters to link the Input data from the drive (Input
Assembly), to link the Output data to the drive (Output Assembly) and to link to a tag
containing the PF755 fault codes and fault descriptions. Each instance of the instruction must
have its own tags for Input and Output data, but ALL instances should share the same fault
code/description tag to save memory.
To import the P_PF755 instruction, plus the User-Defined Types (UDTs) for the input and
output data, and the drive fault code/description tag and its UDT, a Rung Import file has been
provided. Even though the instruction can be used in Ladder Diagram, Function Block Diagram,
or Structured Text logic, the initial definition import must be to a Ladder Diagram routine. If
you want all your P_PF755 instances to be in, say, Function Block Diagram routines, you can
delete the Ladder Diagram rung after the import, but keep the Fault Code/Description Tag and
Page | 21
the AOI and UDT definitions that were imported with the rung. You will need these to create
your P_PF755 instances, regardless of the language you use.
a) Open a Ladder Diagram routine.
b) Where you want to place the imported rung, right-click on the left rail and select Import
Rung(s).
c) Navigate to the folder where you unzipped the Library, go to the Process Add-On
Instructions folder, select the file P_PF755_2_0-00_RUNG.L5X and click OK.
d) Review the items to be imported. If youve already imported the P_Alarm 2.0-01 and/or
P_Mode 2.0-00 instructions, theres no need to import them again. Be sure all the UDTs
and Tags are imported.
e) You can rename AOI backing tag and the Input and Output data tags for your instance,
for example:
SC_101 for the AOI backing tag
SC_101_Inp for the Input data structure tag
SC_101_Out for the Output data structure tag
f) Note the directions in the rung comment for configuring the drives Input Datalinks and
set up your drive to provide the required data. The remaining Input Datalinks and all the
Output Datalinks may be used for other data required by your application.
g) Note the COP (copy) instructions used to move data from the actual drive Input
Assembly to the Input data tag, and from the Output data tag to the actual drive Output
Assembly. This technique is used instead of all the wires / moves that are required by
P_VSD. The COP instructions and Input and Output tags are required because the type
name provided by the Drive Add-On Profile varies with drive configuration, firmware
revision, etc.
The diagram below shows how the I/O data flow through this setup.
(Created when Drive is
created in I/O tree)
Input Assembly
(Type name given by
Drive Add-On Profile)
Drive Status
Speed Feedback
Copy
(COP)
Reference
P_PF755
Instruction
Instance
(with backing tag)
(InOut par.)
Reference
(InOut par.)
Speed Feedback
Output Assembly
(Type name given by
Drive Add-On Profile)
Moves
Drive Commands
Speed Reference
Drive Commands
(MOVs)
Speed Reference
P_PF755
Fault Code /
Description List
Tag
As Requ
ired
Other user
application code
as required
ired
As Requ
Page | 22
3. Reference Manuals
New Reference Manuals for several of the instructions have been released and are included in
the Manuals folder of the unzipped Library.
Page | 23
Page | 24
In addition, several changes to displays were made. The FactoryTalk View SE and ME files
updated are:
Revision 2.0-08 SE update:
(RA-BAS) P_ValveCHelp.gfx
2.0-02
2.0-02
(RA-BAS-ME) P_ValveCHelp.gfx
(RA-BAS-ME) Built-In
PIDE-Faceplate
2.0-02
(RA-BAS-ME) Built-In
Autotune-Faceplate.gfx
(RA-BAS-ME)
P_DoseFM-Faceplate.gfx
2.0-03
(RA-BAS-ME)
P_DoseWS-Faceplate.gfx
2.0-03
(RA-BAS-ME)
P_AInDual-Faceplate.gfx
2.0-02
(RA-BAS-ME) P_PF755Faceplate.gfx
2.0-01
2.0-03
2.0-04
Page | 25
2. P_VSD was modified so that the speed reference and speed feedback scaling calculations
would work better in SoftLogix 5800 and RSLogix Emulate 5000. In previous versions,
the scaling calculations worked fine on hard controllers, but not on SoftLogix or Emulate.
3. The Out_A and Out_B parameters of P_D4SD have their External Access attribute set to
ReadOnly. Previously these parameters had their External Access set to None.
4. Instructions that provide enumerated values such as Val_Sts, Val_Fault, Val_Fdbk,
Val_State and Val_Cmd were modified to buffer those values internally to ensure that,
when the instruction is used in a Continuous Task, intermediate values of these
parameters are never visible on the HMI. This behavior was never seen in projects where
the recommended Periodic Task configurations were used, because the HMI does not
interrupt Periodic Tasks. Affected objects include all motors, drives, valves, discrete and
analog inputs and outputs, and the P_ResInh (Restart Inhibit) instruction.
5. A minor correction was made to the tag description for the L_CPU_20 instance backing
tag in the L_CPU_20 import file. (The AOI definition did not change, just the import
file._
In addition, a new object, T_Sync, has been added to the Time and Date Add-On Instructions
that are included with the Library. This AOI provides the capability for the controller to get the
date and time from an NTP server, such as the domain controller server of a FactoryTalk domain
application, or from an Internet time server. It uses socket services provided by newer
EtherNet/IP modules, such as the 1756-EN2T (with latest firmware). No HMI is provided for
this instruction. The instruction is provided as a RUNG import in order to include MSG tags and
related data types and data. Documentation of instruction setup is included in the rung comment
of the imported rung.
Revision 2.0-09 provides one updated FactoryTalk View ME file. The FactoryTalk View ME
file update is described below.
Revision 2.0-09 ME update:
(RA-BAS-ME) Built-In
PIDE-Faceplate
2.0-04
Revision 2.0-09 includes several updated Reference Manuals. These manuals have been
available on Literature Library (at RockwellAutomation.com and AB.com). The latest current
revisions as of March 20, 2013, are collected in the PlantPAx Library download (zip) file.
Page | 26
Page | 27
8. The Mix-Proof Valve (P_ValveMP) logic was modified to better detect a position failure
when feedback indicates that the valve has made an uncommanded move from an
established position.
9. The PowerFlex 755 Variable Frequency Drive (P_PF755) Add-On Instruction was
modified to correctly handle requests for Hand Mode (including detecting local operation
of the drive).
10. In the Samples application included in the Sample Projects\2_SamplesApp folder of
the distribution, the rung for the P_PF755 instruction was modified and some parameter
values where changed to ensure that the application verifies without errors and is in a
Ready to Demo state (simulated interlock conditions cleared, etc.).
11. The Rung exports for P_PF755, L_CPU, L_ChangeDet and L_Redun were updated to
ensure that the instances being created have correct (default) parameter values in the
imported tags.
12. The Discrete Output (P_DOut) Add-On Instruction logic was changed to break up a
complex rung that scanned properly on hardware controllers but did not work correctly in
RSLogix Emulate 5000 V18.0 (and later revisions).
13. The Clock Sync via NTP (T_Sync) Date and Time Add-On Instruction was updated to
Revision 1.0-01 to align with the Library V3.0-04 release. A fix was made in Revision
1.0-01 that affects Library 3.0 but not Library 2.0.
No existing FactoryTalk View SE files were modified for Revision 2.0-10. The Simple
Sequencer files for FactoryTalk View SE were added to the library in this release. See the
SUMMARY OF FILES below.
Revision 2.0-10 provides updated FactoryTalk View ME files. The FactoryTalk View ME file
updates are described below.
Revision 2.0-10 ME update:
(RA-BAS-ME)
P_AOut-Faceplate
2.0-03
Page | 28
(RA-BAS-ME)
P_Fanout5Faceplate
2.0-02
(RA-BAS-ME)
P_Fanout-Faceplate
2.0-02
(RA-BAS-ME)
Process Faceplate
Objects.ggfx
2.0-06
Page | 29
(RA-BAS-ME)
P_VSD-Faceplate
2.0-03
Changed
TabPanelGrp_Maintenance2\Group_SpeedReference\nde_Cfg_MinSpdRef\nde
_Display8\NumericInputEnable8 to ...nde_NumericInputEnable8 , 'Use variable
minimum/maximum': 0, {#1.Cfg_MaxSpdRef}, was Min/max range values:
0,2147483647
Changed
TabPanelGrp_Maintenance2\Group_SpeedReference\nde_Cfg_MaxSpdRef\nde
_Display9\NumericInputEnable9 to ...nde_NumericInputEnable9 , 'Use variable
minimum/maximum': {#1.Cfg_MinSpdRef}, 9.9E+16, was Min/max range values:
0,2147483647
Changed
TabPanelGrp_Maintenance2\Group_OutDatalinkLimits\nde_Cfg_OutDatalinkMin
\nde_Display25\NumericInputEnable25 to ...nde_NumericInputEnable25. Also
changed object to 'Use variable minimum/maximum': 0,
{#1.Cfg_OutDatalinkMax}, was Min/max range values: 0,2147483647.
Changed
TabPanelGrp_Maintenance2\Group_OutDatalinkLimits\nde_Cfg_OutDatalinkMa
x\nde_Display26\NumericInputEnable26 to ...nde_NumericInputEnable26, use
Connection,Value "{#1.Cfg_OutDatalinkMax}" was "{#1.Cfg_MaxSpdRef}". Also
changed object to 'Use variable minimum/maximum': {#1.Cfg_OutDatalinkMin},
9.9E+16, was Min/max range values: 0,2147483647
Changed
TabPanelGrp_Home\GroupSpeedAndDirection\GroupSpeedControls\nde_OSet
_SpeedRef\nde_Display1\NumericInputEnable1a to
...nde_NumericInputEnable1 , 'Use variable minimum/maximum':
{#1.Cfg_MinSpdRef}, {#1.Cfg_MaxSpdRef}, was Min/max range values:
0,2147483647
Changed
TabPanelGrp_Home\GroupDatalink\GroupOutputDatalink\nde_OSet_OutDatalin
k\nde_Display5\NumericInputEnable5 to ...nde_NumericInputEnable5. Also
changed object to 'Use variable minimum/maximum': {#1.Cfg_OutDatalinkMin},
{#1.Cfg_OutDatalinkMax}, was Min/max range values: 0,2147483647.
Changed
TabPanelGrp_Engineering\Group8\GroupFeedback\GroupSpeedFeedbackEUSc
ale\GroupSpeedFdbkScaled\nde_Cfg_SpeedFdbkEUMax
\nde_Display20\NumericInputEnable20 to ...nde_NumericInputEnable20;
Min/max range: -9.9E+15, 9.9E+16, was: 0,2147483647
Changed
TabPanelGrp_Engineering\Group8\GroupFeedback\GroupSpeedFeedbackEUSc
ale\GroupSpeedFdbkScaled\nde_Cfg_SpeedFdbkEUMin
\nde_Display19\NumericInputEnable19 to ...nde_NumericInputEnable19;
Min/max range: -9.9E+15, 9.9E+16, was: 0,2147483647
Changed
TabPanelGrp_Engineering\Group8\GroupReference\GroupSpeedRefEUScale\G
roupSpeedRefScaled\nde_Cfg_SpeedRefEUMax
\nde_Display11\NumericInputEnable11 to ...nde_NumericInputEnable11;
Min/max range: -9.9E+15, 9.9E+16, was: 0,2147483647
Changed
TabPanelGrp_Engineering\Group8\GroupReference\GroupSpeedRefEUScale\G
roupSpeedRefScaled\nde_Cfg_SpeedRefEUMin
\nde_Display13\NumericInputEnable13 to ...nde_NumericInputEnable13;
Min/max range: -9.9E+15, 9.9E+16, was: 0,2147483647
Changed
TabPanelGrp_Engineering4\GroupEngConfig4\nde_Cfg_SimRampT\nde_Displa
y3\NumericInputEnable3a to ...\ nde_NumericInputEnable3; Decimal point
settings = Fixed, Displayed Value, 0 was Implicit, n/a, n/a
Page | 30
Changed
TabPanelGrp_Engineering5\GroupInputDatalinkCfg\Group_InpDatalinkScaling\G
roupInpDatalinkRaw\nde_Cfg_InpDatalinkRawMax\nde_Display6\
NumericInputEnable6 to ...\nde_NumericInputEnable6; Decimal point settings =
Fixed, Displayed Value, 0 was Implicit, n/a, n/a
Changed
TabPanelGrp_Engineering5\GroupInputDatalinkCfg\Group_InpDatalinkScaling\G
roupInpDatalinkRaw\nde_Cfg_InpDatalinkRawMin\nde_Display4\
NumericInputEnable4 to ...\nde_NumericInputEnable4; Decimal point settings =
Fixed, Displayed Value, 0 was Implicit, n/a, n/a
Changed
TabPanelGrp_Engineering5\GroupInputDatalinkCfg\Group_InpDatalinkScaling\G
roupInpDatalinkEU\nde_Cfg_InpDatalinkEUMax\nde_Display10
\NumericInputEnable10a to ...\nde_NumericInputEnable10; Min/max range: 9.9E+15, 9.9E+16, was Min/max range values: 0,2147483647
Changed
TabPanelGrp_Engineering5\GroupInputDatalinkCfg\Group_InpDatalinkScaling\G
roupInpDatalinkEU\nde_Cfg_InpDatalinkEUMin\nde_Display7\
NumericInputEnable7 to nde_NumericInputEnable7; Min/max range: -9.9E+15,
9.9E+16, was: 0,2147483647
(RA-BAS-ME)
P_ValveMPFaceplate
2.0-02
Added objects
TabPanelGrp_Engineering4\Group13\...\MVP_GotoDisplayButtonX for
navigation to (RA-BAS-ME) P_ValveMP-Config display.
(RA-BAS-ME)
P_AInDualFaceplate
2.0-03
Deleted object
TabPanelGrp_Home\PVAndLimitsGroup\GroupInputSelect\GroupInputA\nde_Se
t_SimPVA\ nde_Display9\nde_BackWithTouch9
Added object
TabPanelGrp_Home\PVAndLimitsGroup\GroupInputSelect\GroupInputA\nde_Se
t_SimPVA\ nde_Display9\nde_NumericInputEnable9
Deleted object
TabPanelGrp_Home\PVAndLimitsGroup\GroupInputSelect\GroupInputB\nde_Se
t_SimPVB\ nde_Display7\nde_BackWithTouch7
Added object
TabPanelGrp_Home\PVAndLimitsGroup\GroupInputSelect\GroupInputB\nde_Se
t_SimPVB\ nde_Display7\nde_NumericInputEnable7
Changed object
TabPanelGrp_Home\PVAndLimitsGroup\PV_SourceGroup\SubGroup\nde_MSet
_SubstPV\ nde_Display2\nde_NumericInputEnable2 object to 'Min/max range...':
-9.9E+15, 9.9E+16, was: 0,2147483647
(RA-BAS-ME)
L_TaskMonFaceplate
2.0-02
Page | 31
UPGRADE NOTE 2: When importing library 2.0 Add-On Instructions into an existing 1.x
application, import the P_Alarm and P_Mode instructions first. Failure to do so may result in
broken instruction signatures when importing instructions that depend on P_Alarm and P_Mode.
Not to worry! If you receive a message about an invalid signature while importing an
instruction, simply go back and import P_Alarm and P_Mode, then import the Add-On
Instruction that gave you the message.
UPGRADE NOTE 3: When importing library 2.0 Add-On Instructions into an existing 1.x
application, be sure the Inf_Type Local Tag STRING in each instruction Instance is set
properly to the default value (same as the instruction name). If not set properly, attempting to
navigate to various analog input faceplates will result in a display not found message. To set
the Local Tag value:
Page | 32
Rung 0 of the instruction definition opens, with the data context set to the instruction
instance. Rung 0 contains STRING instructions (that are jumped over, not executed) that
display the STRING data for the instance.
Page | 33
UPGRADE NOTE 4: The numeric data entry popup display for the FTView SE library, (RABAS) Common-AnalogEdit.gfx, uses version 11.0.8000.0 of the DLL FM20.DLL. This
version of FM20.DLL is installed with FactoryTalk View SE 6.0 if there is not a newer version
already on the PC. If you have installed a recent edition of Microsoft Office or some other
application, your PC may have a newer version of this file.
If you have a newer version of the FM20.DLL file on the PC running the HMI client, you will
receive a FM20.DLL: newer version used diagnostic message each time you call up the
numeric data entry popup. The popup will work correctly, and the message is a nuisance
diagnostic. But if you want to avoid this message, do the following:
Make sure each Client PC and the workstation with FactoryTalk View Studio all have the
same version of FM20.DLL. (By default it is in the: \Windows\System32 folder.) If you
need to copy the DLL from one PC to another, be sure to COPY OVER the previous
version. Do not rename or move the DLL before copying over it.
Open the display (RA-BAS) Common-AnalogEdit in FactoryTalk View Studio. Select
a graphic element on the display (say, one button).
Place the mouse cursor over the selected graphic element, press the SHIFT key, and use
an arrow key to nudge the element one pixel. Release the SHIFT key.
Press the SHIFT key again and nudge the element back where it was. Release the
SHIFT key.
Save the display file.
Modifying and saving the Common Analog Edit popup display links it to the version of
FM20.DLL installed on the PC where the change was made.
The next time you call up the data entry popup on the client, you should not receive the
diagnostic message.
If you continue to have trouble with the data entry popup display, please contact Rockwell
Automation Technical Support for assistance. Remember to ask for PlantPAx support.
UPGRADE NOTE 5: The recommended procedure for handling the L_CPU instruction in an
RSLogix 5000 project when upgrading to PlantPAx Library 2.0 is as follows:
Save the project and make a backup copy of the project file (.ACD).
If the project uses Version 16 or 17 of RSLogix 5000, change the controller to use
Version 18 or later. (These first two steps apply to any upgrade to 2.0.)
Find the L_CPU instruction instance. One way to do this is to right-click on the L_CPU
Add-On Instruction in the Controller Organizer and select Cross Reference. Double-click
on the instance in the Cross Reference to go to the rung containing the instance.
Delete the rung.
Using the Tag Edit window, delete the backing tag for the L_CPU instruction (default is a
Controller Tag named L_CPU).
In the Controller Organizer, delete the L_CPU Add-On Instruction definition.
Page | 34
o If the Delete option is not enabled when you right-click on the L_CPU Add-On
Instruction, not all instances and backing tags have been deleted.
Import the new L_CPU_18 or L_CPU_19 Rung, making sure to create new or
overwrite (not use existing) all the components, including the Add-On Instruction
definition, plus any data types, MSG backing tags and data tags.
Be sure to configure the controller slot number (in the MOV) and the Task to monitor (in the
GSV, if not THIS) on the upper branch of the rung before switching the controller to RUN.
Page | 35
RSLogix 5000 Add-On Instructions (L5X import files) (Object names in bold are new for
Version 2.0 of the Library; Revisions and Dates in bold are updated since the previous revision):
Object
L_ChangeDet
L_CPU_18
L_Redun
Description
Change Detector (Rung export)
Processor Utilization
(FW Rev. 18.x)(Rung export)
Processor Utilization
(FW Rev. 19.x)(Rung export)
Processor Utilization
(FW Rev. 20.x)(Rung export)
Processor Utilization
(FW Rev. 21.x)(Rung export)
Redundant Controller Monitor (Rung export)
L_TaskMon
P_AIn
P_AInAdv
P_AInDual
P_AInMulti
P_Alarm
P_AOut
P_D4SD
P_DIn
P_DoseFM
P_DoseWS
P_DOut
P_Fanout
P_Intlk
P_Logic
P_Mode
P_Motor
P_Motor2Spd
P_MotorHO
P_MotorRev
P_nPos
Task Monitor
Analog Input
Advanced Analog Input
Dual Analog Input
Multiple Analog Input (up to 8)
Alarm (sub-block)
Analog Output
Discrete 2-, 3- or 4-State Device
Discrete Input
Dosing with Flowmeter
Dosing with Weigh Scale
Discrete Output (with pulsing)
Analog Fanout (up to 8 CVs)
Interlocks with First Out
Boolean Logic with Snapshot
Mode (sub-block)
Single-Speed Motor
Two-Speed Motor
Hand Operated Motor
Reversing Motor
n-Position (up to 8) Device
L_CPU_19
L_CPU_20
L_CPU_21
Revision
2.0-01
2.0-00
2.0-00
2.0-00
2.0-00
2.0-03
2.0-01
2.0-03
2.0-03
2.0-04
2.0-03
2.0-01
2.0-04
2.0-06
2.0-03
2.0-05
2.0-05
2.0-05
2.0-03
2.0-00
2.0-01
2.0-00
2.0-05
2.0-06
2.0-05
2.0-06
2.0-04
Date
August 29, 2013
September 30, 2011
(export 29 Aug 2013)
September 30, 2011
(export 29 Aug 2013)
March 15, 2013
(export 29 Aug 2013)
March 22, 2013
(export 29 Aug 2013)
March 18, 2013
(export 29 Aug 2013)
August 23, 2012
September 23, 2013
September 23, 2013
September 23, 2013
September 23, 2013
August 23, 2012
September 23, 2013
September 23, 2013
March 18, 2013
September 23, 2013
September 23, 2013
September 23, 2013
September 23, 2013
September 30, 2011
August 23, 2012
September 30, 2011
September 23, 2013
September 23, 2013
March 18, 2013
September 23, 2013
September 23, 2013
Page | 36
Object
P_Perm
P_PF755
P_PTComp
P_Reset
P_ResInh
P_RunTime
P_Seq
P_StrapTbl
P_ValveC
P_ValveHO
P_ValveMO
P_ValveMP
P_ValveSO
P_ValveStats
P_VSD
Description
Permissives
PowerFlex 755 Variable Frequency Drive
(New with Release 2.0-07 of the Library)
Pressure/Temperature Compensated Flow
Reset
Restart Inhibit
Run Time and Starts
Simple Sequencer (New with Release 2.0-10
of the PlantPAx Library of Process
Objects)
Tank Strapping Table
Control Valve
Hand Operated Valve
Motor Operated Valve
Mix-Proof Valve
Solenoid Operated Valve
2-State Valve Statistics
Variable Speed Drive
Revision
2.0-00
2.0-04
Date
September 30, 2011
September 23, 2013
2.0-00
2.0-00
2.0-01
2.0-00
2.0-00
2.0-00
2.0-04
2.0-04
2.0-08
2.0-05
2.0-06
2.0-00
2.0-07
NOTE: The same Add-On Instruction is used in the Logix controller with FactoryTalk
View SE 6.0 (or later) and with FactoryTalk View ME 6.0 (or later).
NOTE: For your convenience, three additional sets of Add-On Instructions, for Steam
Table calculations, for Time and Date Math and for LINT (64-bit Integer) / LTIME (64-bit
Time) Math, while not part of the PlantPAx Library of Process Objects, are included in the
distribution.
FactoryTalk View SE Global Object Files (Object names in bold are new for Version 2.0 of
the Library; Revisions and Dates in bold are updated since the previous revision):
Object
(RA-BAS) BuiltIn Faceplate Objects.ggfx
(RA-BAS) BuiltIn Graphics Library.ggfx
(RA-BAS) BuiltIn Help Objects.ggfx
(RA-BAS) Common Faceplate Objects.ggfx
(RA-BAS) Logix FacePlate Objects.ggfx
(RA-BAS) Logix Graphics Library.ggfx
(RA-BAS) P_AIn Graphics Library.ggfx
(RA-BAS) P_D4SD Graphics Library.ggfx
(RA-BAS) P_D4SD Motor Graphics Library.ggfx
(RA-BAS) P_DOut Graphics Library.ggfx
(RA-BAS) P_Motor Graphics Library.ggfx
Revision
2.0-03
2.0-01
2.0-02
2.0-02
2.0-01
2.0-02
2.0-01
2.0-01
2.0-00
2.0-00
2.0-00
Date
September 28, 2012
September 28, 2012
January 6, 2012
September 28, 2012
January 6, 2012
September 28, 2012
January 6, 2012
November 4, 2011
September 30, 2011
September 30, 2011
September 30, 2011
Page | 37
Object
(RA-BAS) P_Motor2Spd Graphics Library.ggfx
(RA-BAS) P_MotorHO Graphics Library.ggfx
(RA-BAS) P_MotorRev Graphics Library.ggfx
(RA-BAS) P_nPos Graphics Library.ggfx
(RA-BAS) P_ValveMP Graphics Library.ggfx
(RA-BAS) P_VSD Graphics Library.ggfx
(RA-BAS) Process Alarm Objects.ggfx
(RA-BAS) Process Faceplate Objects.ggfx
(RA-BAS) Process Graphics Objects.ggfx
(RA-BAS) Process Mode Objects.ggfx
(RA-BAS) Process Help Objects.ggfx
(RA-Seq) Standard Objects.ggfx
Revision
2.0-00
2.0-00
2.0-00
2.0-01
2.0-00
2.0-01
2.0-01
2.0-02
2.0-02
2.0-01
2.0-01
2.0-00
Date
September 30, 2011
September 30, 2011
September 30, 2011
November 28, 2011
September 30, 2011
September 28, 2012
January 6, 2012
September 28, 2012
September 28, 2012
September 28, 2012
January 6, 2012
November 19, 2013
Library Release 2.0-10 FTView SE Global Object File Revisions and Dates
FactoryTalk View SE Graphics Files (Object names in bold are new for Version 2.0 of the
Library; Revisions and Dates in bold are updated since the previous revision):
Object
(RA-BAS) Built-In Autotune-Faceplate.gfx
(RA-BAS) Built-In Autotune-Help.gfx
(RA-BAS) Built-In PIDE-Faceplate.gfx
(RA-BAS) Built-In PIDE-Help.gfx
(RA-BAS) Built-In RMPS-Faceplate.gfx
(RA-BAS) Built-In RMPS-Help.gfx
(RA-BAS) Built-In Totalizer-Faceplate.gfx
(RA-BAS) Built-In Totalizer-Help.gfx
(RA-BAS) Built-In TotalizerTgt-Faceplate.gfx
(RA-BAS) Common-AnalogEdit.gfx
(RA-BAS) L_CPU-Faceplate.gfx
(RA-BAS) L_CPU-Help.gfx
(RA-BAS) L_Redun-Faceplate.gfx
(RA-BAS) L_Redun-Help.gfx
(RA-BAS) L_TaskMon-Faceplate.gfx
(RA-BAS) Logix-Faceplate.gfx
(RA-BAS) Logix-Help.gfx
(RA-BAS) P_AIn-Faceplate.gfx
(RA-BAS) P_AIn-Help.gfx
(RA-BAS) P_AInAdv-Faceplate.gfx
(RA-BAS) P_AInAdv-Help.gfx
(RA-BAS) P_AInDual-Faceplate.gfx
(RA-BAS) P_AInDual-Help.gfx
(RA-BAS) P_AInMulti-Faceplate.gfx
Revision
2.0-01
2.0-00
2.0-02
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-02
2.0-01
2.0-00
2.0-00
2.0-01
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
Date
November 28, 2011
September 30, 2011
September 28, 2012
September 30, 2011
September 30, 2011
September 30, 2011
September 30, 2011
September 30, 2011
September 30, 2011
September 28, 2012
January 6, 2012
September 30, 2011
September 30, 2011
January 6, 2012
September 30, 2011
September 30, 2011
September 30, 2011
September 30, 2011
September 30, 2011
September 30, 2011
September 30, 2011
September 30, 2011
September 30, 2011
September 30, 2011
Page | 38
Object
(RA-BAS) P_AInMulti-Help.gfx
(RA-BAS) P_Alarm-Help.gfx
(RA-BAS) P_AOut-Faceplate.gfx
(RA-BAS) P_AOut-Help.gfx
(RA-BAS) P_D4SD-Config.gfx
(RA-BAS) P_D4SD-Faceplate.gfx
(RA-BAS) P_D4SD-Help.gfx
(RA-BAS) P_DIn-Faceplate.gfx
(RA-BAS) P_DIn-Help.gfx
(RA-BAS) P_DoseFM-Faceplate.gfx
(RA-BAS) P_DoseFM-Help.gfx
(RA-BAS) P_DoseWS-Faceplate.gfx
(RA-BAS) P_DoseWS-Help.gfx
(RA-BAS) P_DOut-Faceplate.gfx
(RA-BAS) P_DOut-Help.gfx
(RA-BAS) P_Fanout-Faceplate.gfx
(RA-BAS) P_Fanout5-Faceplate.gfx
(RA-BAS) P_Fanout -Help.gfx
(RA-BAS) P_Intlk-Faceplate.gfx
(RA-BAS) P_IntlkPerm-Help.gfx
(RA-BAS) P_Logic-Config.gfx
(RA-BAS) P_Logic -Faceplate.gfx
(RA-BAS) P_Logic -Help.gfx
(RA-BAS) P_Mode-Config.gfx
(RA-BAS) P_Mode-Help.gfx
(RA-BAS) P_Motor-Faceplate.gfx
(RA-BAS) P_Motor-Help.gfx
(RA-BAS) P_Motor2Spd-Faceplate.gfx
(RA-BAS) P_Motor2Spd-Help.gfx
(RA-BAS) P_MotorHO-Faceplate.gfx
(RA-BAS) P_MotorHO-Help.gfx
(RA-BAS) P_MotorRev-Faceplate.gfx
(RA-BAS) P_MotorRev-Help.gfx
(RA-BAS) P_nPos -Faceplate.gfx
(RA-BAS) P_nPos -Help.gfx
(RA-BAS) P_PF755-Faceplate.gfx
(RA-BAS) P_Perm-Faceplate.gfx
(RA-BAS) P_ResInh-Faceplate.gfx
(RA-BAS) P_RunTime-Faceplate.gfx
(RA-BAS) P_ValveC-Faceplate.gfx
(RA-BAS) P_ValveC-Help.gfx
(RA-BAS) P_ValveHO-Faceplate.gfx
(RA-BAS) P_ValveHO-Help.gfx
Revision
2.0-00
2.0-01
2.0-02
2.0-01
2.0-00
2.0-00
2.0-01
2.0-01
2.0-00
2.0-01
2.0-00
2.0-01
2.0-00
2.0-01
2.0-01
2.0-01
2.0-01
2.0-00
2.0-01
2.0-01
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-01
2.0-00
2.0-01
2.0-00
2.0-01
2.0-00
2.0-01
2.0-01
2.0-01
2.0-00
2.0-01
2.0-00
2.0-00
2.0-02
2.0-02
2.0-00
2.0-02
Date
September 30, 2011
January 6, 2012
January 6, 2012
January 6, 2012
September 30, 2011
September 30, 2011
January 6, 2012
January 6, 2012
September 30, 2011
January 6, 2012
September 30, 2011
January 6, 2012
September 30, 2011
September 28, 2012
January 6, 2012
January 6, 2012
January 6, 2012
September 30, 2011
January 6, 2012
January 6, 2012
September 30, 2011
September 30, 2011
September 30, 2011
September 30, 2011
September 30, 2011
September 30, 2011
January 6, 2012
September 30, 2011
January 6, 2012
September 30, 2011
January 6, 2012
September 30, 2011
January 6, 2012
January 6, 2012
January 6, 2012
September 28, 2012
January 6, 2012
September 30, 2011
September 30, 2011
January 6, 2012
December 3, 2012
September 30, 2011
September 28, 2012
Page | 39
Object
(RA-BAS) P_ValveMO-Faceplate.gfx
(RA-BAS) P_ValveMO-Help.gfx
(RA-BAS) P_ValveMP-Config.gfx
(RA-BAS) P_ValveMP-Faceplate.gfx
(RA-BAS) P_ValveMP-Help.gfx
(RA-BAS) P_ValveSO-Faceplate.gfx
(RA-BAS) P_ValveSO-Help.gfx
(RA-BAS) P_ValveStats-Faceplate.gfx
(RA-BAS) P_VSD-Faceplate.gfx
(RA-BAS) P_VSD-Help.gfx
(RA-Seq) P_Manual_Prompt-Response.gfx
(RA-Seq) P_Manual_Prompt-Select.gfx
(RA-Seq) P_Seq-Config.gfx
(RA-Seq) P_Seq-Config-Step.gfx
(RA-Seq) P_Seq-DeleteStep-Confirm.gfx
(RA-Seq) P_Seq-Detail.gfx
(RA-Seq) P_Seq-Faceplate.gfx
(RA-Seq) P_Seq-Help.gfx
(RA-Seq) P_Seq-InputForce.gfx
(RA-Seq) P_Seq-InsertStep-Confirm.gfx
(RA-Seq) P_Seq-Quick.gfx
(RA-Seq) P_Seq-Test.gfx
(RA-Seq) P_Seq-TimerForce.gfx
Revision
2.0-00
2.0-01
2.0-00
2.0-00
2.0-01
2.0-01
2.0-01
2.0-00
2.0-00
2.0-01
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
Date
September 30, 2011
January 6, 2012
September 30, 2011
September 30, 2011
January 6, 2012
September 28, 2012
January 6, 2012
September 30, 2011
September 30, 2011
January 6, 2012
November 19, 2013
November 19, 2013
November 19, 2013
November 19, 2013
November 19, 2013
November 19, 2013
November 19, 2013
November 19, 2013
November 19, 2013
November 19, 2013
November 19, 2013
November 19, 2013
November 19, 2013
For the FTView ME Sample Projects, if changes are made to the Project window size, the Title
bar checkbox, or the Border checkbox in the project settings, the Graphic Display Scaling dialog
box opens. It is recommended that NO scaling be used with any PlantPAx global objects or
graphics.
FactoryTalk View ME Global Object Files (Object names in bold are new for Version 2.0 of
the Library; Revisions and Dates in bold are updated since the previous revision):
Object
(RA-BAS-ME) BuiltIn Faceplate Objects.ggfx
(RA-BAS-ME) BuiltIn Graphics Library.ggfx
(RA-BAS-ME) BuiltIn Help Objects.ggfx
(RA-BAS-ME) Common Faceplate Objects.ggfx
(RA-BAS-ME) Logix FacePlate Objects.ggfx
(RA-BAS-ME) Logix Graphics Library.ggfx
(RA-BAS-ME) P_AIn Graphics Library.ggfx
Revision
2.0-04
2.0-02
2.0-02
2.0-03
2.0-02
2.0-02
2.0-01
Date
September 28, 2012
December 3, 2012
January 6, 2012
September 28, 2012
January 6, 2012
September 28, 2012
January 6, 2012
Page | 40
Object
(RA-BAS-ME) P_D4SD Graphics Library.ggfx
(RA-BAS-ME) P_D4SD Motor Graphics Library.ggfx
(RA-BAS-ME) P_DOut Graphics Library.ggfx
(RA-BAS-ME) P_Motor Graphics Library.ggfx
(RA-BAS-ME) P_Motor2Spd Graphics Library.ggfx
(RA-BAS-ME) P_MotorHO Graphics Library.ggfx
(RA-BAS-ME) P_MotorRev Graphics Library.ggfx
(RA-BAS-ME) P_nPos Graphics Library.ggfx
(RA-BAS-ME) P_ValveMP Graphics Library.ggfx
(RA-BAS-ME) P_VSD Graphics Library.ggfx
(RA-BAS-ME) Process Alarm Objects.ggfx
(RA-BAS-ME) Process Faceplate Objects.ggfx
(RA-BAS-ME) Process Graphics Library.ggfx
(RA-BAS-ME) Process Help Objects.ggfx
(RA-BAS-ME) Process Mode Objects.ggfx
Revision
2.0-02
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-00
2.0-01
2.0-00
2.0-01
2.0-00
2.0-06
2.0-02
2.0-01
2.0-01
Date
January 25, 2012
September 30, 2011
September 30, 2011
September 30, 2011
September 30, 2011
September 30, 2011
September 30, 2011
January 6, 2012
September 30, 2011
September 28, 2012
September 30, 2011
November 20, 2013
September 28, 2012
January 6, 2012
September 28, 2012
Library Release 2.0-10 FTView ME Global Object File Revisions and Dates
FactoryTalk View ME Graphics Files (Object names in bold are new for Version 2.0 of the
Library; Revisions and Dates in bold are updated since the previous revision):
Object
(RA-BAS-ME) Built-In Autotune-Faceplate.gfx
(RA-BAS-ME) Built-In Autotune-Help.gfx
(RA-BAS-ME) Built-In PIDE-Faceplate.gfx
(RA-BAS-ME) Built-In PIDE-Help.gfx
(RA-BAS-ME) Built-In RMPS-Faceplate.gfx
(RA-BAS-ME) Built-In RMPS-Help.gfx
(RA-BAS-ME) Built-In Totalizer-Faceplate.gfx
(RA-BAS-ME) Built-In Totalizer-Help.gfx
(RA-BAS-ME) Built-In TotalizerTgt-Faceplate.gfx
(RA-BAS-ME) L_CPU-Faceplate.gfx
(RA-BAS-ME) L_CPU-Help.gfx
(RA-BAS-ME) L_Redun-Faceplate.gfx
(RA-BAS-ME) L_Redun-Help.gfx
(RA-BAS-ME) L_TaskMon-Faceplate.gfx
(RA-BAS-ME) Logix-Faceplate.gfx
(RA-BAS-ME) Logix-Help.gfx
(RA-BAS-ME) P_AIn-Faceplate.gfx
(RA-BAS-ME) P_AIn-Help.gfx
(RA-BAS-ME) P_AInAdv-Faceplate.gfx
(RA-BAS-ME) P_AInAdv-Help.gfx
(RA-BAS-ME) P_AInDual-Faceplate.gfx
Revision
2.0-03
2.0-00
2.0-04
2.0-01
2.0-01
2.0-00
2.0-01
2.0-00
2.0-01
2.0-01
2.0-00
2.0-01
2.0-01
2.0-02
2.0-01
2.0-00
2.0-02
2.0-01
2.0-02
2.0-01
2.0-03
Date
December 3, 2012
September 30, 2011
February 25, 2013
January 6, 2012
October 24, 2011
September 30, 2011
October 24, 2011
September 30, 2011
October 24, 2011
October 24, 2011
September 30, 2011
October 24, 2011
January 6, 2012
November 20, 2013
October 24, 2011
September 30, 2011
May 31, 2012
January 6, 2012
May 31, 2012
January 6, 2012
November 20, 2013
Page | 41
Object
(RA-BAS-ME) P_AInDual-Help.gfx
(RA-BAS-ME) P_AInMulti-Faceplate.gfx
(RA-BAS-ME) P_AInMulti-Help.gfx
(RA-BAS-ME) P_Alarm-Faceplate.gfx
(RA-BAS-ME) P_Alarm-Help.gfx
(RA-BAS-ME) P_AOut-Faceplate.gfx
(RA-BAS-ME) P_AOut-Help.gfx
(RA-BAS-ME) P_D4SD-Config.gfx
(RA-BAS-ME) P_D4SD-Faceplate.gfx
(RA-BAS-ME) P_D4SD-Help.gfx
(RA-BAS-ME) P_DIn-Faceplate.gfx
(RA-BAS-ME) P_DIn-Help.gfx
(RA-BAS-ME) P_DoseFM-Faceplate.gfx
(RA-BAS-ME) P_DoseFM-Help.gfx
(RA-BAS-ME) P_DoseWS-Faceplate.gfx
(RA-BAS-ME) P_DoseWS-Help.gfx
(RA-BAS-ME) P_DOut-Faceplate.gfx
(RA-BAS-ME) P_DOut-Help.gfx
(RA-BAS-ME) P_Fanout-Faceplate.gfx
(RA-BAS-ME) P_Fanout5-Faceplate.gfx
(RA-BAS-ME) P_Fanout -Help.gfx
(RA-BAS-ME) P_Intlk-Faceplate.gfx
(RA-BAS-ME) P_IntlkPerm-Help.gfx
(RA-BAS-ME) P_Logic-Config.gfx
(RA-BAS-ME) P_Logic -Faceplate.gfx
(RA-BAS-ME) P_Logic -Help.gfx
(RA-BAS-ME) P_Logic -Snapshot.gfx
(RA-BAS-ME) P_Mode-Config.gfx
(RA-BAS-ME) P_Mode-Help.gfx
(RA-BAS-ME) P_Motor-Faceplate.gfx
(RA-BAS-ME) P_Motor-Help.gfx
(RA-BAS-ME) P_Motor2Spd-Faceplate.gfx
(RA-BAS-ME) P_Motor2Spd-Help.gfx
(RA-BAS-ME) P_MotorHO-Faceplate.gfx
(RA-BAS-ME) P_MotorHO-Help.gfx
(RA-BAS-ME) P_MotorRev-Faceplate.gfx
(RA-BAS-ME) P_MotorRev-Help.gfx
(RA-BAS-ME) P_nPos-Faceplate.gfx
(RA-BAS-ME) P_nPos-Help.gfx
(RA-BAS-ME) P_Perm-Faceplate.gfx
(RA-BAS-ME) P_PF755-Faceplate.gfx
(RA-BAS-ME) P_ResInh-Faceplate.gfx
(RA-BAS-ME) P_RunTime-Faceplate.gfx
Revision
2.0-01
2.0-01
2.0-01
2.0-02
2.0-02
2.0-03
2.0-00
2.0-00
2.0-01
2.0-01
2.0-01
2.0-00
2.0-04
2.0-01
2.0-03
2.0-01
2.0-02
2.0-01
2.0-02
2.0-02
2.0-00
2.0-02
2.0-01
2.0-00
2.0-01
2.0-00
2.0-01
2.0-00
2.0-00
2.0-01
2.0-01
2.0-01
2.0-01
2.0-01
2.0-00
2.0-01
2.0-01
2.0-03
2.0-01
2.0-02
2.0-01
2.0-01
2.0-01
Date
January 6, 2012
October 24, 2011
January 6, 2012
January 6, 2012
January 6, 2012
November 20, 2013
September 30, 2011
September 30, 2011
October 24, 2011
January 6, 2012
October 24, 2011
September 30, 2011
December 3, 2012
January 6, 2012
December 3, 2012
January 6, 2012
September 28, 2011
January 6, 2012
November 20, 2013
November 20, 2013
September 30, 2011
January 6, 2012
January 6, 2012
September 30, 2011
October 24, 2011
September 30, 2011
October 24, 2011
September 30, 2011
September 30, 2011
October 24, 2011
January 6, 2012
October 24, 2011
January 6, 2012
October 24, 2011
September 30, 2011
October 24, 2011
January 6, 2012
May 31, 2012
January 6, 2012
January 6, 2012
December 3, 2012
October 24, 2011
October 24, 2011
Page | 42
Object
(RA-BAS-ME) P_ValveC-Faceplate.gfx
(RA-BAS-ME) P_ValveC-Help.gfx
(RA-BAS-ME) P_ValveHO-Faceplate.gfx
(RA-BAS-ME) P_ValveHO-Help.gfx
(RA-BAS-ME) P_ValveMO-Faceplate.gfx
(RA-BAS-ME) P_ValveMO-Help.gfx
(RA-BAS-ME) P_ValveMP-Config.gfx
(RA-BAS-ME) P_ValveMP-Faceplate.gfx
(RA-BAS-ME) P_ValveMP-Help.gfx
(RA-BAS-ME) P_ValveSO-Faceplate.gfx
(RA-BAS-ME) P_ValveSO-Help.gfx
(RA-BAS-ME) P_ValveStats-Faceplate.gfx
(RA-BAS-ME) P_VSD-Faceplate.gfx
(RA-BAS-ME) P_VSD-Help.gfx
Revision
2.0-03
2.0-02
2.0-02
2.0-01
2.0-01
2.0-01
2.0-00
2.0-02
2.0-01
2.0-03
2.0-01
2.0-01
2.0-03
2.0-01
Date
May 31, 2012
December 3, 2012
July 05, 2012
September 28, 2012
October 24, 2011
January 6, 2012
September 30, 2011
November 20, 2013
January 6, 2012
September 28, 2012
January 6, 2012
October 24, 2011
November 20, 2013
January 6, 2012
Page | 43