Академический Документы
Профессиональный Документы
Культура Документы
BS EN
10223-2:1998
ICS 77.140.65
I
I
BS EN 10223-2:1998
National foreword
This British Standard is the English language version of EN 10223-2:1997 published
by the European Committee for Standardization (CEN). It supersedes BS 1485: 1983
which is withdrawn.
The UK participation in its preparation was entrusted to Technical Committee
ISE/26, Steel wire, which has the responsibility to:
- aid enquirers to understand the text;
- present to the responsible European committee any enquiries on the
interpretation, or proposals for change, and keep the UK interests informed,
- monitor related international and European developments and promulgate
them in the UK
A list of organizations represented on this committee can be obtained on request to
its secretary.
Cross-references
Summary of pages
This document comprises a front cover, an inside front cover, the EN title page,
pages 2 to 7 and a back cover.
Amd. No.
Date
Text affected
EN 10223-2
EUROPEAN STANDARD
NORME EUROPENNE
EUROPISCHE NORM
December 1997
ICS 77.140.65
Descriptors: Wire nettings, wire, steels, specifications, characteristics, dimensions, dimensional tolerances, coatings, galvanizing, tests,
packing
English version
Steel wire and wire products for fences - Part 2: Hexagonal steel
wire netting for agricultural, insulation and fencing purposes
Fils et produits trfils en acier pour cltures Par-tie 2: Grillage rnailhes hexagonales, en acier,
1997 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national
Members.
Ref. No. EN 10223-2:1997 E
Page 2
EN 10223-2:1997
Foreword
This European Standard has been prepared by
TechnicaI Committee ECISS/TC 30, Steel wires, the
secretariat of which is held by BSI.
This European Standard shall be given the status of a
national standard, either by publication of an identical
text or by endorsement, at the latest by June 1998, and
conflicting national standards shall be withdrawn at
the latest by June 1998.
The standard will comprise the following parts:
Part 1: Zinc and zinc alloy coated steel barbed wire
Part 2: Hexagon& steel wire netting for
agricultural, insulation and f e n c i n g purposes
Part 3: Hexagon& steel wire netting for engineering
purposes
Part 4: Steel wire welded mesh fencing
Part 5: Steel wire woven hinged joint and knotted
mesh fencing
Part 6: Steel wire chain link fencing
Contents
Page
Foreword
Scope
Normative references
Definitions
Information to be supplied by the
purchaser
5 Manufacture
6 Requirements
7 Sampling and testing
8 Inspection and documentation
9 Methods of test
10 Packaging
2
3
3
3
5
5
5
7
7
7
7
BSI 1998
Page 3
EN 10223-2:1997
1 Scope
This European Standard specifies requirements for the
dimensions and coating of steel wire netting having
meshes of hexagonal shape specified for agricultural,
insulation and fencing purposes.
2 Normative references
This European Standard incorporates by dated or
undated reference, provisions from other publications.
These normative references are cited at the
appropriate places in the text and the publications are
listed hereafter. For dated references, subsequent
amendments to or revisions of any of these
publications apply to this EN only when incorporated
in it by amendment or revision. For undated references
the latest edition of the publication referred to applies.
EN 100161, Wire rod of non-alloy steel for drawing
3 Definitions
3.3
twist
Roll width
mm
< 500
500 < 1000
1000 < 1500
1500 < 2000
NOTE
0
1
2
3
Page 4
EN 10223-2:1997
BSI 1998
Page 5
EN 10223-2:1997
5 Manufacture
6 Requirements
6.1 General
BSI 1998
Figure 3 - Loading of
netting to test unwinding
resistance
Page 6
EN 10223-2:1997
Table 2 - Mesh sizes, preferred wire sizes, zinc and zinc alloy coating masses and widths
of netting
Mesh details
eter
Size
Tolerances
Annealed
mm
mm
mm
10
13
13
16
20
20
25
25
25
25
30
30
30
40
40
40
50
50
50
65
75
75
75
100
l,o
1,5
1,5
2,0
2,0
2,0
3,0
3,0
3,0
3,0
4,0
4,0 5)
4,05)
5,0
5,0
5,0
6,0
6,0
6,0
7,0
8,O
8,O
8,0
8,O
0,60
0,60
0,50
0,60
0,60
0,80
0,50
0,70
0,80
0,90
0,80
0,90
1,10
0,80
0,90
1,1
0,80
0,90
Tolerances3)
mm
0,70
0,70
0,60
0,70
0,70
0,90
0,60
0,80
0,90
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,lO
1,0
1,2
0,l0
1,0
1,2
0,90
1,0
1,1
0,90
0,90
1,2
1,1
1,3
1,5
1,2
1,0
1,0
1,4
1,6
mm
1,0
0,90
0,90
0,08
0,l0
+ 0,08
f 0,lO
+ 0,lO
f0,08
f 0,lO
f 0,lO
f. 0,lO
f 0,lO
+ 0,lO
f 0,lO
+0,10
mm
g/m2
145
95
80
70
55
65
40
45
55
60
40
40
60
35
45
55
25
30
40
30
20
25
30
30
300
450
500
600
750
900
1000
1200
1500
1800
2 000
0 BSI 1998
Page 7
EN 10223-2:1997
Organic coated
wire diameter
Tolerance on
organic coated
wire
mm
mm
mm
0,60
l,oo
+ 0,lO
0,80
1,20
O,M
l,oo
1,20
1,30
1,50
1,70
f 0,lO
f: 0,lO
* 0,lO
i 0,15
6.4 Selvedges
lf a single selvedge is used, the diameter of the
selvedge wire shah be at least equal to or one size
greater than that of the netting wire, e.g. netting wire
of size 0,9 mm with a selvedge wire of size 1,0 mm.
For netting having 2 ply or 3 ply selvedges and/or a
centre stretching wire, the wire for these shall be at
least equal to the netting wire diameter.
Table 4 - Wire size and number of dips to be
withstood by zinc coated wires carried out in
accordance with prEN 10244-2
v:*
Number of dips
Zinc coated
diameter
mm
078
079
14
1
1
1
1
1
12
1,4
176
0 BSI 1998
9 Methods of test
9.1 Netting, zinc or zinc alloy coated after
fabrication
Half minute
Minute
077
2
2
0
0
1
1
1
10 Packaging
Hexagonal netting shah be supplied in 25 m or 50 m
rolls +y m.
NOTE Other roll lengths may be agreed between purchaser and
manufacturer.
BSEN
10223-2:1998
BSI is the independent national body responsible for preparing British Standards. It
presents the UK view on standards in Europe and at the international level. It is
incorporated by Royal Charter.
Revisions
Copyright subsists in alI BSI publications. BSI aIso holds the copyright, in the UK, of
the publications of the internationaI standardization bodies. Except as permitted
under the Copyright, Designs and Patents Act 1988 no extract may be reproduced,
stored in a retrieval system or transmitted in any form or by any means - electronic,
photocopying, recording or otherwise - without prior written permission from BSI.
This does not preclude the free use, in the course of implementing the standard, of
necessary details such as symbols, and size, type or grade designations. If these
details are to be used for any other purpose than implementation then the prior
written permission of BSI must be obtained
If permission is granted, the terms may include royalty payments or a licensing
agreement. Details and advice can be obtained from the Copyright Manager.
Tel: 0181996 7070.
BSI
389 Chiswick High Road
London
w44AL