New FDT2 DTMs (first check if your frame application supports FDT2 DTMs) for: o Yokogawas EJX HART(5) Series Pressure Transmitter o Yokogawas EJX HART 7 Series Pressure Transmitter o Yokogawas EJA-NEXTHART (5) Series Pressure Transmitter o Yokogawas EJA-NEXT HART 7 Series Pressure Transmitter New DTMs for: o Yokogawas YTA70 HART 7 Temperature Transmitter o Yokogawas Flexa HART(5) Series Analyzers (PH, DO, SC, ISC) o Yokogawas ROTAMASS HART(5) Coriolis Mass Flowmeter (V4) Updated DTM library (DTMLibrary HART 2013-2) containing the updated device DTMs for Yokogawas other HART field devices. o All DTMs feature enhanced functionality e.g. device diagnostic window, device easy set up window etc.
Please note that:
After unzipping the file YOKOGAWADeviceDTMInstaller.msi in Yokogawa DTMCollection HART 2013-2 must be installed before proceeding to the DTM Library HART 2013-2 (201306-17). On Choose Setup Type select Custom and then HART. The DTM Library HART 2013-2 (2013-06-17) is implemented using Microsoft .NET technology. Consequently the Microsoft .NET Runtime Environment 4.0 must be installed on your pc prior to installing the library. On the download site a link to the proper Microsoft download site is included. After installation run Microsoft update to check for .NET 4.0 updates. When you have currently installed DTMLibrary version 2006-1 or later, run Setup.exe in DTMLibrary HART 2013-2 (2013-06-17) and the old library is automatically replaced by the new one. For DTMLibrary versions older than version 2006-1, before installing the new DTM library the old library has to be un-installed. Than run Setup.exe in DTMLibrary HART 2013-2 (2013-06-17). When your FDT frame application is run the first time after installing the new library the DTM library has to be updated. o In Yokogawas FieldMate device management tool update DTM Setup in Start/Yokogawa FieldMate/Tools. Upon completion the DTM list is shown in which the DTM assignment procedure should be completed (refer to the appropriate section in the Instruction Manual for details). o In all other frame applications the device catalogue MUST be updated. The DTM for the EJX910(930) Multi-variable (Flow) Pressure Transmitter can be used to configure the device in Basic Compensation Mode. In order to configure the transmitter in Auto Compensation Mode an add-on Flow Configuration Wizard module, including an extensive fluid property database, is required. A license for this wizard can be obtained from your local Yokogawa representative.