Академический Документы
Профессиональный Документы
Культура Документы
VistaCam Digital
Only trained experts may position and install the appliance and start it
up for the first time.
Minimum system requirements
Imaging program
Computer system
1 Installation
1
2.1 Setting up the configuration in DBSWIN
The USB Y adapter for the connection to the computer is included in the
scope of delivery. If the power supply provided with this adapter is insufficient, use a quick-connect adapter with a power unit (order no. 2106-170-51
(20 cm), 2106-170-52 (100 cm)).
Start DBSWIN.
Choose Options > Show configuration from the menu.
Click the "Modules"
button.
Double-click "Video".
The "Video Properties" window opens.
Select the required configuration.
Setting up image export
Go to the "Settings" tab.
Click "Driver Installation".
Confirm the message with "OK".
The "Drr Dental Driver Setup" installation wizard opens.
Follow the instructions of the installation wizard. When the wizard asks
you to connect or disconnect the camera to/from the computer, do so.
2 Configuration
Activate/deactivate "Autoexport images".
Each image is automatically copied to a defined path. The path, file format, and other settings can be made in the light table module.
1 / 3
If you are only connecting up one camera, make the settings on the
"Video source 1" tab.
If you are connecting up two cameras, make the settings for the second
camera on the "Video source 2" tab.
If you are connecting up a VistaCam and a VistaProof, use the
"Video source 2" tab for the VistaProof.
Open the "Video source 1" or "Video source 2" tab.
You can choose from four profiles depending on the required pressure:
- Standard (default setting with default values)
- Low
- Medium
- High
You can modify the values for the low, medium, and high profiles:
Delay time
Sensitivity
(light touch)
Threshold
(strong touch)
Check the settings on the basis of the value and coloured indicator.
To save changed settings, click the "Save profile"
button.
2 / 3
Changing settings
Go to the "Settings" tab.
Display
WDM driver
Advanced settings
LED intensity
configuration
Function
Close VistaEasyView.
Profile configuration
- Medium
- High
You can modify the values for the low, medium, and
high profiles.
Delay time
Sensitivity
(light touch)
Threshold
(strong touch)
Carry out an electrical safety test in accordance with national and local
regulations (e.g. measure the leakage current for the patient).
Record the results.
SW_Settings
CAM_Activate_
Delay_Time
9000-618-89/01
DRR DENTAL AG
Hpfigheimer Strasse 17
74321 Bietigheim-Bissingen, Germany
2011/02
3 / 3