Академический Документы
Профессиональный Документы
Культура Документы
Sheet details
S.no
1
Page 1
History
Sheet details
Entry detail
Basic,Fabric manager, Device manager overview is explained
Page 2
History
date
2016/02/17
Page 3
Basic
command
fcping
show module
Page 4
Basic
show interfaces
Page 5
Basic
Page 6
Basic
Cisco Troubleshooting
Purpose and CLI output
The fcping feature verifies reachability of a node by checking its end-to-end connectivity. You can invoke th
fcping feature by providing the FC ID, the destination port WWN, or the device alias information.
We can check and confirm server HBAs (WWWN) and subsystem ports(array FA ports) successfully registere
with the fabric name server
Does the correct pWWN for the HBAs and the storage subsystem ports show up on the correct port in the FLOG
database?
Page 7
Basic
check the active zone set, check the HBA and Storage subsystem are present in the zone of active zone set
Page 8
Basic
show tech-support command is useful when collecting a large amount of information about your switch fo
troubleshooting purposes. The output of this command can be provided to technical support representative
when reporting a problem.
Page 9
Fabric manager
1 Menu
Page 10
Fabric manager
Page 11
Fabric manager
Page 12
Device manager
1 Menu bar :
2 Tool bar
3 Tabs
4 Legend
5 status
6 supervisor modules
7 switching modules
Page 13
Device manager
Page 14
Device manager
Red box: An SFP is present but fabric login (FLOGI) has failed. Typically there is a mismatch in port or fabric param
with the neighboring device. For example, a port parameter mismatch would occur if a node device were connected
port configured as an E port. An example of a fabric parameter mismatch would be differing timeout values.
Yellow box: In Device Manager, a port has been selected.
Gray box: The port is administratively disabled.
Black box: An SFP is not present.
Page 15
Device manager
Page 16