Академический Документы
Профессиональный Документы
Культура Документы
https://www.campbellsci.com.br/cr1000
CR1000
Rugged Versatility
Multipurpose datalogger for
monitoring and control
Images
Descrio Tcnica
Especificaes
Compatibilidade
Documentos
Videos
Downloads
FAQs
Estudos de Caso
Articles & Press
Releases
Viso Geral
O CR1000 nosso datalogger mais amplamente usado. Pode ser usado em ampla gama
de funes de medio e controle. Robusto o bastante para condies extremas e
confivel suficiente para ambientes remotos, o mesmo se aplica para configuraes
complexas.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com) 23/5/2016 15:44
1 de 12
https://www.campbellsci.com.br/cr1000
O CR1000 baseia-se em nossos dataloggers CR10X e j foi posto em uso por todo o
mundo. Memria aumentada e mais canais de medio o tornam um poderoso
componente central em seu sistema de obteno de dados.
Read More
Benefcios e Caractersticas
Aplicaes ideais incluem clima com risco de incndio, sistemas mesonet, perfis
de vento, estaes meteorolgicas, qualidade do ar, Eto/agricultura, umidade do
solo, nvel/estgio da gua, aquicultura, previso de avalanche, reflectometria no
domnio do tempo, teste em veculo, SCADA e qualidade do ar
SRAM e relgio suportado por bateria que garante que dados, programas e horrio
preciso sero mantidos enquanto o datalogger estiver desconectado da fonte de
alimentao principal
Contm chip ASIC personalizado que aumenta a contagem dos pulsos, o controle
das portas e as capacidades das comunicaes seriais
Images
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com) 23/5/2016 15:44
2 de 12
https://www.campbellsci.com.br/cr1000
3D/CAD Files:
cr1000 footprint (PDF)
CR1000 CAD Drawing (DXF)
Descrio Tcnica
The CR1000 consists of a measurement and control module and a wiring panel. This
datalogger uses an external keyboard/display and power supply. Low power consumption
allows the CR1000 to operate for extended time periods on a battery recharged with a
solar paneleliminating the need for AC power. The CR1000 suspends execution when
primary power drops below 9.6 V, reducing the possibility of inaccurate measurements.
The CR1000's module measures sensors, drives direct communications and
telecommunications, reduces data, controls external devices, and stores data and
programs in on-board, non-volatile storage. The electronics are RF shielded and glitch
protected by the sealed, stainless-steel canister. A battery-backed clock assures
accurate timekeeping. The module can simultaneously provide measurement and
communication functions. The on-board, BASIC-like programming language supports data
processing and analysis routines.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com) 23/5/2016 15:44
3 de 12
https://www.campbellsci.com.br/cr1000
The CR1000WP is a black, anodized aluminum wiring panel that is compatible with all
CR1000 modules. The wiring panel includes switchable 12 V, redistributed analog grounds
(dispersed among analog channels rather than grouped), unpluggable terminal block for 12
V connections, gas-tube spark gaps, and 12 V supply on pin 8 to power our COM-series
phone modems and other peripherals. The control module easily disconnects from the
wiring panel allowing field replacement without rewiring the sensors.
Originally, the standard CR1000 had 2 MB of data/program storage, and an optional
version, the CR1000-4M, had 4 MB of memory. In September 2007, the standard CR1000
started having 4 MB of memory, making the CR1000-4M obsolete. Dataloggers that have
a module with a serial number greater than or equal to 11832 will have a 4 MB memory.
The 4 MB dataloggers will also have a sticker on the canister stating 4M Memory.
Especificaes
Pulse Counters: 2
Switched 12 Volt: 1
A/D Bits: 13
Dimensions:
23.9 x 10.2 x 6.1 cm
(9.4" x 4.0" x 2.4")
Protocols Supported: PakBus, Modbus, DNP3, FTP, HTTP, XML, POP3, SMTP,
Telnet, NTCIP, NTP, SDI-12, SDM
Warranty: 3 years
Temperature Range
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com) 23/5/2016 15:44
4 de 12
https://www.campbellsci.com.br/cr1000
Memory
1Certain
I/O ports can be paired as transmit and receive for measuring smart serial sensors.
Compatibilidade
Sensors
With several channel types, the CR1000 is compatible with nearly every available sensor,
including thermocouples, SDI-12 sensors, and 4 to 20 mA sensors. A custom ASIC chip
expands its pulse count, control port, and serial communications capabilities. The
CR1000's I/O ports can be paired as transmit and receive, allowing serial communications
with serial sensors and devices.
Communications
The CR1000 communicates with a PC via direct connect, Ethernet interfaces, multidrop
modems, short-haul modems, phone modems (land line, digital cellular, and voicesynthesized), RF telemetry, and satellite transmitters (Argos, High Data Rate GOES, and
Meteosat).
Data can be viewed on the CR1000KD Keyboard Display, the CD100 Mountable Display
with Keyboard, an iOS or Android device (requires LoggerLink), CD295 DataView II
Display, or a user-supplied PDA (PConnect or PConnectCE software required).
Compatible external data storage devices are the CFM100, NL115, and SC115.
Enclosures
The CR1000 and its power supply can be housed in any of our standard enclosures.
Power
Any 12 Vdc source can power the CR1000 datalogger. Power supplies commonly used
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com) 23/5/2016 15:44
5 de 12
https://www.campbellsci.com.br/cr1000
with the CR1000 are the BPALK, PS150, and PS200. The BPALK provides eight
non-rechargeable D-cell alkaline batteries with a 7.5 Ah rating at 20C.
Both the PS150 and PS200 consist of a sealed rechargeable 7 Ah battery and a charging
regulator. Their battery should be connected to a charging source (either a wall charger or
solar panel). These two power supplies differ in their charging regulator. The PS150 has a
standard regulator and the PS200 has a micro-controller-based smart regulator. The
PS200's regulator provides two-step constant voltage charging and temperature
compensation that optimize battery charging and increases the batterys life.
Also available are the BP12 and BP24 battery packs, which provide nominal ratings of 12
and 24 Ah, respectively. These batteries should be connected to a regulated charging
source (e.g., a CH100 or CH200 connected to a unregulated solar panel or wall charger).
Software
CRBasic, the CR1000's full programming language, supports simple or complex
programming and many onboard data reduction processes. Compatible software includes:
Short Cut
PC200W
Documentos Relacionados
Product Brochures
CR1000 Specifications
Manuals
Technical Papers
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com) 23/5/2016 15:44
6 de 12
https://www.campbellsci.com.br/cr1000
Serial Sensors: Interfacing with CSI Dataloggers (App. Note Code: 2MI-V)
Case Studies
Wiring a Datalogger to a
Multiplexer - 7:18
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com) 23/5/2016 15:44
7 de 12
https://www.campbellsci.com.br/cr1000
Cellular Modems |
Troubleshooting - 15:29
PVS5120-Series Samplers |
CR1000 Connection (Part 3) - 3:33
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com) 23/5/2016 15:44
8 de 12
https://www.campbellsci.com.br/cr1000
CRBasic | Advanced
Programming - 6:50
Downloads
CR1000 OS v.29 (4.51 MB) 29-02-2016
Execution of this download installs the CR1000 Operating System and Compiler on your
computer. It also updates the CR1000 support files for the CRBasic Editor.
Note: This OS has crossed the 2 Meg CR1000 size limit for remote download. The
OS must be downloaded to the 2 Meg CR1000 via direct connect with the Device
Configuration Utility. All OS download methods are supported by the 4 Meg
CR1000.
Upgrading from versions prior to version 28 of the Operating System will reset the
dataloggers CPU drive. This is due to a change in the format of the file system from
FAT16 to FAT32. In order for the datalogger to operate correctly, as part of the upgrade,
the CPU drive is formatted to FAT32. Any programs stored and running from the CPU
drive will be lost. It is not recommended to update the dataloggers Operating System
over a remote connection where program control regulates the communication
equipment (turning it on or off, etc.). In these cases, an on-site visit and a backup using
DevConfigs backup utility is necessary to update the dataloggers Operating System.
Watch the Video Tutorial: Sending an OS to a Local Datalogger.
In all cases where the datalogger is being updated from an Operating System prior to 28,
the use of DevConfigs backup utility is recommended due to the CPU drive
being formatted using the new FAT32 format.
Adicione a Lista
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com) 23/5/2016 15:44
9 de 12
https://www.campbellsci.com.br/cr1000
Expand All
1. Is there a way to check when the last background calibration was executed on a
CR1000?
2. How many tables can be defined for the CR1000?
3. How many RS-232 devices can the CR1000 handle?
4. Can HTTP and PakBus operate simultaneously?
5. How often is the lithium battery voltage measured by the datalogger?
6. How long can the cables be between networked dataloggers?
7. Is it possible to use LoggerNet RTMC while a datalogger is collecting data from a
serial sensor?
8. What does the PreserveVariables instruction do?
9. Is it possible to connect the CR800, CR850, CR1000, or CR3000 to a SCADA
system through a Modbus RS-485 protocol?
10. Can files on a PakBus datalogger be hidden?
View All Related FAQs (178)
Estudos de Caso
Chile: Solar-Energy Assessment
10 deYou
12 created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com) 23/5/2016 15:44
https://www.campbellsci.com.br/cr1000
Washington AgWeatherNet
Washington State Universitys AgWeatherNet (AWN) is a large
automated network composed almost entirely of Campbell Scientific
products. AWNs purpose is......read more
11 deYou
12 created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com) 23/5/2016 15:44
https://www.campbellsci.com.br/cr1000
Press Releases
NHRA Acceptance of Campbell Scientific Dataloggers 22-04-2008
More Versatile Channels, Increased Memory: Campbell Scientifics CR1000 Datalogger
06-09-2005
12 deYou
12 created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com) 23/5/2016 15:44