Академический Документы
Профессиональный Документы
Культура Документы
Confidential
2015-02-27
Page1, Total19
Confidential
Contents
1
1.1
1.1.1
Prerequisite................................................................................................................... 3
1.1.2
Preparation ................................................................................................................... 3
1.1.3
Connect To Probe......................................................................................................... 5
1.2
1.2.1
Prerequisite................................................................................................................... 6
1.2.2
Preparation ................................................................................................................... 6
1.2.3
2.1
2.2
2.3
2.3.1
2.3.2
2.4
2.5
2.6
2.7
2015-02-27
Page2, Total19
Confidential
1.1.2 Preparation
Step 1: Go to http://www.samsung.com/ca/support/, choose Manuals & Downloads
Step 2: Choose Mobile Device, and under Model Name, search for Galaxy S4
Step 3: Choose Galaxy S4 and make sure the info is same as screenshot:
Step 5: Install the software and follow all the prompts during the process.
Step 6: On the Galaxy S4 UE, enter in dialpad *#0808#, and choose AP for USB mode and
RNDIS+DM+MODEM as USB settings:
2015-02-27
Page3, Total19
Confidential
Go to tab Diagnostics, then click Query Modem, should see similar feedback as below,
otherwise its not working properly:
2015-02-27
Page4, Total19
Confidential
or press F8
2015-02-27
Page5, Total19
Confidential
successful; otherwise, check the COM settings and make sure they are correct, double
click on the MS to modify settings.
1.2
1.2.2 Preparation
Step 1: Download and install necessary drivers for the GPS module.
Step 2: Connect the GPS module to the test PC.
Step 3: Verify the COM port number in Device Manager. Example for BU-353 USB GPS
module:
2015-02-27
Page6, Total19
Confidential
or press F8
1. Choose correct model from Model dropdown menu; for GU-353, choose NMEA
2. Choose COM port based on 1.2.2 Step 3;
4. Click OK.
Step 5: Click Test Port
successful; otherwise, check the model and COM settings to make sure they are
correct, and remove the device by choosing the GPS and click
4 again.
2015-02-27
Page7, Total19
2015-02-27
Confidential
Page8, Total19
Confidential
2.2
on top toolbar.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
2.3
2015-02-27
Page9, Total19
Confidential
To view UE network connection information, click View -> WCDMA -> UE State
2015-02-27
Page10, Total19
Confidential
To view UE network connection information, click View -> LTE -> Serving and
Neighboring Cells
2.4
or press F9.
Step 2: From dropdown menu, choose the items to build the test plan
2015-02-27
Page11, Total19
Confidential
to bring up or
to bring down.
2.5
, pause record
, slice record
/stop
Step 3: Test plan will be stopped automatically once all items are executed. To stop a test
plan prematurely, click
2015-02-27
Page12, Total19
2.6
Confidential
2.7
/stop record
, pause
, slice record
Step 1: Start log recording, and choose proper save path for the log;
Step 2: Run tests with external tools;
Step 3: When test finish, stop log recording.
2015-02-27
Page13, Total19
Confidential
3 Test Cases
3.1
Both UE locked into WCDMA mode (by dialing *#2263# and choose WCDMA
Band preference -> WCDMA ALL)
Obtain complete MOS test kit from Huawei engineer. The kit consists an ESI Maya 44
USB+ MOSCard and two specially made test cables
3.1.2 Principle
The laptop running GENEX Probe test plan is the central controller for the test
The MOS card is an external sound card connected to laptop via USB cable. It either
converts digital sound file to analog signal, or wise versa
During the test calls, the laptop/Probe plays a sound file through MOS card + cable to the
MO (call originating) UE, which is played via its microphone input to the MT (call
terminating) UE
The MT UE receives this sound played by the MO UE, and from its earphone output it
sends this sound back to laptop/Probe via MOS card + cable
MOS card converts this analog signal back into a digital sound file, and Probe compares
the recorded file to the original file
Using a special algorithm, it determines the similarity/quality of the recorded file to the
original file, and gives a score between 0 to 5
The higher the score, the closer resemblance the recorded file is to the original file, which
2015-02-27
Page14, Total19
Confidential
c) Install the driver, after installation, the ESI control panel will appear in taskbar
notification area.
2.
2015-02-27
Page15, Total19
Confidential
c) Connect the MOS Card, and both test UEs to the laptop via supplied USB cables
When MOS card is connected to the laptop, the ESI control panel will be enabled:
2015-02-27
Page16, Total19
Confidential
Note: by default
INPUT gain = 0dB for all 4 channels
MONITOR gain = 0dB & muted for all 4 channels
OUTPUT gain = 0dB for all 4 channels
To properly conduct test and obtain reasonable MOS score, the OUTPUT gain needs
to be adjusted, change the gain of OUTPUT channel in-use to a predefined value;
please consult Huawei DT analysis engineer/leader from your market for the exact
value used in each test.
, the
g)
2015-02-27
Open test plan window, and under MS1 make the test plan to look like:
Make sure the settings are correct; key settings to watch out for are:
Page17, Total19
Confidential
2015-02-27
Page18, Total19
Confidential
2015-02-27
Page19, Total19