Академический Документы
Профессиональный Документы
Культура Документы
INDUSTRIAL TYPE
ELECTRIC WATER HEATERS
WITH THERMOSTAT CONTROL
GENERAL SPECIFICATIONS
PRODUCT DESCRIPTION
PLACE OF USAGE
HEATING TIME
DIMENSIONS
TECHNICAL TABLE
ADVISED INSTALLATION SCHEMATIC
MODEL & ORDER ARTICLE SCHEDULE
PRODUCT SELECTION CHART
www.diko.com.tr
info@diko.com.tr
GENERAL SPECIFICATIONS
Floor Standing
Capacity range between 125 - 500 liter
Heating capacity of 10KW_12KW_15KW_18KW_22,5KW
220380V / 50-60Hz
190-208-400-415-440V (optional)
(0-90) C adjustable thermostat
Temperature displayer: thermometer
Digital thermostat-thermometer(optional)
Safety thermostat
T&P temperature and pressure valve(optional)
Leakage current relay(optional)
Insulation: Fiberglass
Insulation: Polyurethane or Rockwool(optional)
Electrostatic powder paint coated body
Drain valve
Magnesium Anode
Manometer(optional)
Smart appearance
2 years product guarantee
10 years spare part supply guarantee
up
www.diko.com.tr
info@diko.com.tr
GENERAL SPECIFICATIONS
___(090) C Adjustable Thermostat
Adjusting desired temperature value between (0-90)C is possible via this adjustment thermostat.
up
___Temperature Displayer : Thermometer
Placed on tank body or panel cover. Displays tank water temperature value. With capilary tube
gas, 52mm diameter, pointer type and can read between 0-120C (tolerance between %+/-1C).
up
___Digital Thermostat Thermometer with Contact
Usage purpose of this digital thermostatic thermometer is to adjust the desired water temperature
value. nteger or decimal temperature value can be read directly from the screen.
up
___Safety Thermostat
Provides tank protection via breaking electric circuit of the heaters unless tank water temperature
level passes over operating temperature value. Factory adjusted and sealed. This adjustment is
inconvertible.
up
___Temperature and Pressure T&P Relief Valve
T&P valve is a mechanical safety accessory against excessive heat and pressure. It discharges at
max. 99C and/or at max. 10,4bars.
up
___Leakage Current Relay (Human Life Protection System)
Heaters leaks current as miliamper as time goes by. This leakage current relay protects system
and human life against short circuits and touchings.
up
___Manometer on Tank
This installation accessory displays the inner tank pressure of the operating electrical water heater.
The models with contactor eleminates the heating operation at the adjusted pressure value.
up
www.diko.com.tr
info@diko.com.tr
PRODUCT DESCRIPTION
DSSY-T Serie electric water heaters are much more economic industrial type electric water
heaters than DSSY-X Serie. This serie is equipped with electric command panel, power steps
control, adjustable thermostat, contactor and has a heating power capacity as mentioned in
general specifications part.
DSSY-T serie electric water heaters are vertical floor standing type with a capacity range of
125-500 liter. In this serie, double protection against over heating is provided by its safety
thermostat with double contacts. Protection against excessive water/steam pressure is
provided by Pressure safety valve. Optional Temperature and Pressure T&P relief valve
protects the system against excessive heat and pressure. We strongly suggest this
mechanical safety accessory. Drain valve is another mechanical installation accessory which
is given with the product as mounted.
The thermostat-thermometer of DSSY-T serie provides (30-65) temperature adjustment
option to its users. Heating operation will stop automatically when the tank water
temperature reaches to adjusted value.
up
www.diko.com.tr
info@diko.com.tr
PLACE OF USAGE
Villas
Resorts
Gyms
Construction Sites
Containers
Farm Houses
Green Houses
Milk Plants
Beauty Saloons
Ofices and Bureaus
up
www.diko.com.tr
info@diko.com.tr
DSSY-T SERIE
HEATING TIME
MODEL
DSSY-125T.10
DSSY-150T.10
DSSY-200T.12
DSSY-250T.12
DSSY-300T.15
DSSY-400T.18
DSSY-500T.22.5
CAPACITY
125 liter
150 liter
200 liter
250 liter
300 liter
400 liter
500 liter
TOTAL HEATER
POWER
10 KW
10 KW
12 KW
12 KW
15 KW
18 KW
22,5 KW
UNIT HEATER
POWER
5 KW
5 KW
6 KW
6 KW
7,5 KW
6 KW
7,5 KW
HEATER
QUANTITY
HEATING TIME
(minutes)
32,3 min.
38,7 min.
43,0 min.
53,8 min.
51,6 min.
57,3 min.
57,3 min.
Mentioned heating times are being calculated resuming no consumption and resuming that the temperature difference between input and out put is 37C. Schedule is valid for mentioned KW
values. Different KW values effects only the heating time in this schedule.
DSSY-T SERIE
DIMENSIONS
MODEL
DSSY-125T
DSSY-150T
DSSY-200T
DSSY-250T
DSSY-300T
DSSY-400T
DSSY-500T
CAPACITY
125 liter
150 liter
200 liter
250 liter
300 liter
400 liter
500 liter
BODY DIAMETER
480 mm
480 mm
580 mm
580 mm
580 mm
700 mm
700 mm
DEPTH
610 mm
610 mm
710 mm
710 mm
710 mm
830 mm
830 mm
HEIGHT
1110 mm
1310 mm
1140 mm
1400 mm
1650 mm
1400 mm
1710 mm
DKO reserves the right of changing the models and dimensions without announcing. KW differences do not effect the product dimensions.
up
www.diko.com.tr
info@diko.com.tr
DSSY-T SERIE
THECNICAL TABLE
MODEL
DSSY-125T.10
DSSY-150T.10
DSSY-200T.12
DSSY-250T.12
DSSY-300T.15
DSSY-400T.18
DSSY-500T.22.5
CAPACITY
125 litre
150 litre
200 litre
250 litre
300 litre
400 litre
500 litre
TOTAL HEATER
POWER
10 KW
10 KW
12 KW
12 KW
15 KW
18 KW
22,5 KW
5 KW
5 KW
6 KW
6 KW
7,5 KW
6 KW
7,5 KW
HEATER QUANTITY
8600 kcal/h
8600 kcal/h
8600 kcal/h
10320 kcal/h
12900 kcal/h
15480 kcal/h
19350 kcal/h
232,4 lt/h
232,4 lt/h
232,4 lt/h
278,9 lt/h
348,6 lt/h
418,3 lt/h
522,9 lt/h
TOTAL HEAT
CAPACITY
CONSUMPTION
WATER FLOW
VOLTAGE/FREQUENCY
220-380V, 50Hz.
TEMPERATURE
ADJUSTMENT
max OPERATING
PRESSURE
TEST PRESSURE
15,4 bar
PROTECTION AGAINST
HUMUDITY
WATER INPUT /
OUTPUT
10 bar
IP40
RE-CIRCULATION
PACKING DIMENSIONS
(WIDTH X DEPTH X HEIGHT)
580x710x1250
580x710x1450
680x810x1280
680x810x1540
680x810x1790
800x930x1540
800x930x18510
GROSS WEIGHT
93 kg
106 kg
117 kg
134 kg
150 kg
163 kg
190 kg
Diko reserves the right of changing the models and dimensions without announcing. Opening Pressure of Safety Valve is 10bar. Consumption water flow is valid for 37temperature
difference.
up
www.diko.com.tr
info@diko.com.tr
DSSY-T SERIE
ADVISED INSTALLATION SCHEMATIC
T&P or P relief valve is a safety accessory which protects the tank against excessive heat
and/or excessive pressure. It discharges hot water incase of excessive heat or excessive
pressure. Hot water is dangerous and may cause injuries or scaldings. To provide
protection against this discharged hot water danger, it must be connected to floor channel
with an installation pipe.
Do not change the settings of safety valve and do not ever use it as an hot water valve. Do
not disassemble and cancel it. Do not connect it to another installation. Otherwise the
guarantee clause will be invalid.
up
www.diko.com.tr
info@diko.com.tr
10 KW
12 KW
15 KW
18 KW
22.5 KW
125 Liter
150 Liter
200 Liter
250 Liter
300 Liter
400 Liter
500 Liter
DSSY-125T.10
DSSY-150T.10
DSSY-200T.10
DSSY-250T.10
DSSY-300T.10
DSSY-400T.10
DSSY-500T.10
DSSY-125T.12
DSSY-150T.12
DSSY-200T.12
DSSY-250T.12
DSSY-300T.12
DSSY-400T.12
DSSY-500T.12
DSSY-200T.15
DSSY-250T.15
DSSY-300T.15
DSSY-400T.15
DSSY-500T.15
DSSY-200T.18
DSSY-250T.18
DSSY-300T.18
DSSY-400T.18
DSSY-500T.18
DSSY-200T.22.5
DSSY-250T.22.5
DSSY-300T.22.5
DSSY-400T.22.5
DSSY-500T.22.5
NUMBER OF
BEDROOMS
FAMILY OF 2
2 BEDROOMS
FAMILY OF 3
3 BEDROOMS
FAMILY OF 4
4 BEDROOMS
FAMILY OF 6
6 BEDROOMS
NUMBER OF
SHOWERS / BATHS
SUGGESTED MODEL
1 SHOWER
125 liter
DSSY-125T.10
1 BATH, 1 SHOWER
150 liter
DSSY-150T.10
200 liter
DSSY-200T.10
250 liter
DSSY-250T.12
300 liter
DSSY-300T.15
1 BATH , 1
SHOWER
1 BATH , 1
SHOWER
2 BATHS , 1
SHOWER
DSSY-400T.18
2 BATH , 2
SHOWER
1 WHIRPOOL BATH,
2 SHOWER
500 liter
DSSY-400T.22.5
DSSY-500T.22.5
Hot water need column covers approximate values. Real water consumption changes up to consumer habits.
up
www.diko.com.tr
info@diko.com.tr
www.diko.com.tr
info@diko.com.tr
10