Академический Документы
Профессиональный Документы
Культура Документы
B)
C)
D)
43)
The network management system (NMS) has detected that a router has an
interface going up and down unexpectedly. You do not have permissions to log in to
the router.
Which data, gathered by the NMS, should you review to help determine the cause?
A)
Syslog messages
B)
interface utilization
C)
D)
CPU utilization
44)
You have configured alerts to notify you of high CPU load on your devices.
Your network management system (NMS) is detecting high CPU load, but alerts are
not being triggered.
What is the most likely cause of this issue?
A)
B)
C)
D)
45)
What should you check when trying to determine why your routers' interfaces
are having high packet loss?
A)
threshold
B)
C)
occurring
D)
the day
46)
You are using NetFlow to analyze the traffic on your network. You notice that
you have a large amount of traffic originating from various systems in your network
destined to a single unrecognized off-net IP address during otherwise off-peak
hours.
What is the most likely cause?
A)
B)
C)
D)
47) You notice that several routers are showing an increase in CPU and memory
utilization that is starting to concern you.
What will likely happen if this trend continues?
A)
B)
the routers
C)
The routers will deprioritize and drop packets over 1500 bytes
D)
48)
What is the most logical first question a network administrator should ask a
user who complains of slow access to an Internet website?
A)
B)
C)
D)
49)
Users are reporting slow response across a WAN circuit. You have analyzed
the bandwidth utilization of a WAN circuit for the last 30 days and determined the
following:
B)
C)
D)
50)
You notice that network performance over an inter-campus Ethernet link is
very slow, and one side of the connection is experiencing a high number of packet
drops.
What should you do to further analyze this issue?
A)
B)
51)
C)
D)
B)
C)
D)
52) An Orion NPM user wants to be able to make changes to the resources as they
view them on the Orion Web Console.
What must be done to the user's account?
A)
B)
C)
D)
53) One of your network engineers is using both Orion NPM and Engineer's Toolset.
The engineer cannot access the toolset from within the Orion Web Console.
What should you enable on the engineer's Orion account?
54)
A)
B)
Allow PassLink
C)
D)
Assuming that the administrator has access to the community string for the device,
how should the administrator add additional monitoring statistics for this device,
while preserving historical data?
A)
B)
C)
D)
E)
credentials
delete the node, then add it again and provide the SNMP
55) When you look at utilization graphs for a given interface, they show greater
than 100% utilization.
Which interface configuration change will correct this issue?
A)
B)
C)
D)
56) An Orion NPM administrator wants to separate the duties of two network
engineers, as follows:
One engineer should see web views, alerts, and reports for the devices in Sydney
only.
The other should see web views, alerts, and reports for the devices in Perth only.
Which two Orion NPM components should be used to accomplish this task? (Choose
two)
A)
B)
Map Maker
C)
D)
E)
System Manager
F)
57)
The Universal Device Poller (UnDP) can only retrieve information in which
format?
A)
ANSI 1
B)
MIB
C)
XML
D)
WMI
58) Where should an alert be created for a Universal Device Poller (UnDP)?
A)
B)
C)
D)
59) Various users of the Orion NPM website need exclusive access to different set
of reports.
How should this be accomplished?
A) Save the reports in different sub-directories under \Reports and set those
as the Report Folder for each account
B) Use custom properties and account limitations to control report access
C) Save the reports in different sub-directories and set the permissions for
each user
D) Create the reports while logged in as each user and set the appropriate
permissions
60) You need to write a report that shows network response time on an hourly
basis for the past 30 days. When you try to set the summarization setting in the
report to hourly, you get a reporting error.
What is a possible cause of this issue?
A)
B)
C)
D)
days
days
61) Every Monday morning, you need to provide a report on the previous week's
network-wide availability.
Which component should you use to accomplish this task?
A)
B)
C)
D)
63) In the Orion NPM Advanced Alert Engine, how should you ensure that the
trigger action will behave as you expect?
A)
test the alert from within Alert View of the Orion Web Console
B)
device
C)
Manager
D)
64) Your network has a few critical devices on the other side of a WAN link from
your Orion server. If the router (name = "target") connecting Orion to the remote
site goes down, you do not want alerts about those devices.
How should you configure Orion NPM Alert Suppression within the Advance Alert
Engine to achieve your goal?
A) suppress alert when all of the following apply: Node Name is equal to "target"
| Node Status is equal to "Down"
B) suppress alert when all of the following apply: Node Name is equal to "target" |
Interface Status is equal to "Down"
C) suppress alert when any of the following apply: Node Name is equal to "target"
| Node Status is equal to "Down"
D) suppress alert when any of the following apply: Node Name is equal to "target"
| Interface Status is equal to "Down"
65) You wish to retain Syslog messages in Orion NPM for 30 days.
Which Orion component should you use to do this?
A)
B)
Database Manager
C)
System Manager
D)
Syslog Viewer
Facility * Severity
B)
Facility + Severity
C)
Facility * 8 + Severity
D)
Facility * 8 / Severity
67) The Orion NPM administrator needs to see when an interface is above 85%
utilization.
How can you make sure the gauges highlight this?
A)
use the NPM settings to change the thresholds for the high level
B)
C)
D)
thresholds
68) An Orion NPM administrator enables audible alerts through the Orion Web
Console.
Assuming you are on a view that shows alerts, when will the audible alert be
triggered?
A)
B)
C)
D)
69) The Orion NPM administrator needs to create an NOC view that has only a
summary page.
Which Orion component should you use to accomplish this?
A)
B)
C)
System Manager
D)
71)
Which two steps are required to create a nested map using Orion NPM?
(Choose two.)
A)
B)
add a hyperlink from the site details map to the site overview
C)
D)
drag and drop the site details map onto the site overview map
E)
create a single map that includes both site overview and site
details
72)
During the planning process, which two factors determine the license level
required for Orion NPM? (Choose two)
A)
B)
C)
D)
E)
73) Your current deployment has multiple Orion NPM servers monitoring multiple
locations from a single site. This is producing inaccurate data and high WAN
bandwidth utilization.
What are the two most efficient ways to address this issue? (Choose two)
A)
B)
C)
D)
E)
74) Which two actions are required to integrate Engineer's Toolset with the Orion
Web Console? (Choose two)
A)
B)
C)
D)
E)
75) Which Orion NPM module allows you to create user-experience monitors?
A)
B)
C)
D)
IP Address Manager
http://www.solarwinds.com/server-application-monitor/user-experiencemonitors.aspx
76) You are looking for information on configuring an Advanced Alert on Orion
NPM.
What is the first action you should take to get an answer from Thwack?
A)
B)
C)
related
forum
D)
answers
search for "advanced alert" and see if there are any verified
77) Accounting has asked you for a report that provides a list of all the interfaces
that have exceeded 85% utilization for the last 30 days. This data exist in Orion
NPM, but there is no default report available. Browsing the Thwack Content
Exchange, you find a report exists that will satisfy accounting's request.
How should this OrionReport definition file be applied to the Orion NPM system?
A)
B)
C)
D)