Академический Документы
Профессиональный Документы
Культура Документы
EA0579R2
Description
The Powermite 599 MZ Series SSB electronic valve actuator requires a 24 Vac supply
floating control signal to provide three-position control. This actuator is designed to
work with Powermite 599 MZ Series zone control valves with a 7/32-inch (5.5 mm)
stroke and a threaded valve bonnet that fits the actuator.
Features
Manual override
Application
For use in heating and cooling HVAC applications with Powermite 599 MZ Series
valves that need 45 lb. (200N) nominal force. They can be used in liquid and steam
service applications.
Product Number
SSB81U
Ordering
Information
To order a complete valve plus actuator assembly from the factory, combine the
actuator prefix code with the suffix of the valve product number. See Technical Bulletin
TB 252 (155-307P25) for selection procedures.
254
Warning/Caution Notations
WARNING:
CAUTION:
Technical Instructions
Document No. 155-195P25
December 18, 2003
Specifications
Power supply
Function
Operating voltage
Frequency
Power consumption
24 Vac 20%
50/60 Hz
0.8 VA
Running time
60 Hz
50 Hz
Nominal stroke
Nominal force
150 seconds
180 seconds
7/32-inch (5.5 mm)
45 lbs. (200N)
UL listed to UL873
cUL certified to Canadian Standard
C22.2 No. 24-93
Agency certification
Ambient conditions
Miscellaneous
Ambient temperature
Operation
Transport and storage
Medium temperature
Dimensions
Weight
EA0643R1
Accessory
2
G Y1 Y
EA0859R1
EA0581R1
Service Kits
EAO808R1
3mm
Page 2
Operation
Technical Instructions
Document No. 155-195P25
December 18, 2003
EA0849R2
Mounting and
Installation
Wiring
Do not use autotransformers. Use earth ground isolating step-down Class 2 power
supplies.
Determine supply transformer rating by summing total VA of all actuators used.
It is recommended that one transformer power no more than 10 actuators.
See Table 1 for terminal connections.
Y2
Y1
0
1
24
Vac
NEUT
EA0585R1
EARTH GROUND
ISOLATING CLASS 2
TRANSFORMER FOR
24 Vac POWER
120 Vac
Page 3
Technical Instructions
Document No. 155-195P25
December 18, 2003
Wiring, Continued
Table 1. Terminal Connections.
Standard
Symbol
Function
Terminal
Connection
Supply (SP)
Y1
Y2
WARNING:
Terminal connection "G" is Common, not ground.
Manual Override
For manual positioning, turn the manual override knob in the center of the position
indicator. See Figure 6. Turn clockwise to move the output shaft outward.
The actuator will maintain its position until power is provided or restored.
A
B
Note:
When knob is turned
counterclockwise (A), the
spindle is retracted.
EA0587R3
Figure 6.
Page 4
EA0588R3
Start-Up
Technical Instructions
Document No. 155-195P25
December 18, 2003
Position indicator at 0
(Output shaft is retracted)
Position indicator at 1
(Output shaft is extended)
Troubleshooting
Service Kits
See Accessory and Service Kits for available accessory and service parts.
If the actuator is inoperative, replace the unit.
Dimensions
3-1/8
(79)
3-7/8
(98)
EA0589R2
1-7/8
(48)
3-1/4
(83)
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. Other product or company names mentioned herein may be the trademarks of their respective owners.
2003 Siemens Building Technologies, Inc.
Siemens Building Technologies, Inc.
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
U.S.A.
Page 5