Академический Документы
Профессиональный Документы
Культура Документы
FACTORY AUTOMATION
Non-Linearity
The degree that the indicated position of the
magnet at points along the stroke varies from the
actual physical position. Non-linearity of an LDT is
expressed in absolute error or as a percentage of
the active stroke length.
Resolution
Resolution is the smallest incremental change in
position along the stroke length of the sensor that
can be detected and indicated in an output. When
using LDTs with analog output (i.e., voltage or
current outputs), resolution is limited by the amount
of power supply-induced output ripple and the
sensitivity and/or design capabilities of the receiver
electronics. Digital system resolution is defined by a
specific value.
Recirculation
A method used to improve the resolution of a
system using digital LDTs. The on time of the
pulse width output is multiplied by a specific factor.
This multiplication provides more counting time
for the counter in the customers electronics, thus
improving the resolution.
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
Principles Of Operation
Voltage
Series
950IS
953
955
956
957
Quadrature
Protocol
Clock (+)
Data (+)
SSI
EtherNet/IP
Clock (+)
Data (+)
SSI
EtherNet/IP
7230
7330
Digital
Housing Only.
This housing accepts all rod style LDTs.
950MD
952
Current
Modbus
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
952 BlueOx
952QD BlueOx
Quadrature
953 VMAX
955LC BRIK
955 eBRIK II
955S Smart
BRIK
15-26 VDC
15-26 VDC
7-30 VDC
24 VDC
24 VDC
10-30 VDC
4-20mA
Yes
No
Yes
Yes
Yes
Yes
0-10 VDC
Yes
No
Yes
Yes
Yes
Yes
Stop/Start
Yes
No
Yes
No
No
No
Control Pulse
Yes
No
Yes
No
No
No
Yes
No
Yes
No
No
No
Velocity
No
No
No
No
No
No
Ethernet/IP
No
No
No
No
No
No
No
No
Yes
No
No
Modbus
No
No
No
No
No
No
Position Accuracy
(of full stroke)
0.05%
0.05%
0.01%
0.1%
0.03%
0.1%
Repeatability
(of full stroke)
0.006%
0.001%
0.00006
0.01%
0.001%
0.01%
Resolution
Internal
Resolution 0.001
0.001
Analog - 0.00006
Digital - Controller
Dependant
SSI - Up to 1 Micron
Internal
Resolution 0.014
16-Bit
Internal
Resolution 0.014
2-168
2-168
1-300
6-180
1-74
4-180
Null Zone
Dead Band
2.5
2.5
2.5 STD
(2.25 optional)
2.75
1.5
In Cylinder Mounting
Yes
Yes
Yes
On Cylinder
Mounting
On Cylinder
Mounting
On Cylinder
Mounting
IP67
IP67
IP68
IP67
IP67
IP67,
IP68 Optional
Yes
Yes
Yes
No
No
No
Hand-Held Programmer
Yes
No
Yes
No
Yes
Yes
No
No
Consult Factory
No
No
No
Competitive Style
Connector
Yes
No
Yes
No
No
No
Excellent
Excellent
Excellent
Good
Good
Good
Multiple Magnets
Yes
No
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Metric
Threads & Dimensions
Yes
Yes
Yes
N/A
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
Yes
No
No
Measurement
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
Consult Factory
Yes
Consult Factory
Yes
Yes
Yes
Yes
Yes
Yes
Cost
Mid-Range
Mid-Range
Mid-Range
Low
Low
Low
Supply Voltage
Analog Outputs
Digital Outputs
No
Performance
Mechanical Considerations
Applications
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
955A BRIK
955D BRIK
955DQ BRIK
Quadrature
956 BLOK
Housing Option 957 Brik
ReadyLink
7330 Pro-Stik II
13.5-30 VDC
13.5-30 VDC
13.5-30 VDC
7-30 VDC
7-30 VDC
10-30 VDC
13.5-30 VDC
Yes
No
No
Yes
Yes
No
Optional
Yes
Yes
No
No
Yes
Yes
No
No
No
No
Yes
No
Yes
Yes
No
No
No
No
Yes
No
Yes
Yes
No
No
No
No
Yes
No
Yes
Yes
No
No
No
No
Controller
Dependent
No
Controller
Dependent
No
No
No
No
No
No
No
No
No
Yes
No
No
No
No
No
No
Yes
No
No
No
No
No
No
No
No
No
Yes
No
0.05%
0.05%
0.05%
0.01%
0.01%
0.01%
0.1%
0.006%
0.006%
0.006%
0.00006
Equal to
Resolution
0.0001
0.1%
Internal
Resolution 0.001
Controller
Dependent
0.001
Analog - 0.00006
Digital - Controller
Dependant
SSI - Up to 1 Micron
Internal
Resolution
0.00003
0.0001
Internal
Resolution
0.014
5-180
5-180
5-180
4-36
1-180
14-288
8-288
9.25
2.65
2.75
On Cylinder
Mounting
On Cylinder
Mounting
On Cylinder
Mounting
On Cylinder
Mounting
On Cylinder
Mounting
No
No
IP67,
IP68 Optional
IP67,
IP68 Optional
IP67,
IP68 Optional
IP67
IP67
IP66
IP68,3A Optional
No
No
No
No
No
Consult Factory
No
No
Yes
Consult Factory
Consult Factory
Yes
No
No
No
Consult Factory
Consult Factory
Consult Factory
Consult Factory
Yes
Yes
No
No
No
No
Yes
Yes
No
No
Good
Good
Good
Excellent
Good
Good
Good
No
Yes
No
Yes
Consult Factory
Yes
No
Yes
Yes
Yes
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
No
N/A
No
No
No
No
No
Yes
No
No
No
Yes
Consult Factory
Consult Factory
Consult Factory
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Consult Factory
Consult Factory
Consult Factory
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Mid-Range
Mid-Range
Low
Mid-Range
Mid-Range
Mid-Range
Mid-Range
Mid-Range
*The 956 BLOK is a housing option for the 955 BRIK. Refer to the 955 BRIK with the chosen output for complete sensor specifications.
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
t
le
Fie
Pr ld
og
ram
ma
b
Ha
Lo zard
ca ou
tio s
ns
Mu
Ca ltip
pa le M
bil
itie agn
e
s
ge
Co
Re mpe
pla tit
ce ive
me Dr
nts op
In
era
nd
Be
v
da
Fo
o
Ha
M rsh
ill- En
Du vir
ty onm
e
nt
Applications
Series
950IS
950MD
952
952
Stainless Steel
952RS
953
953 w/ M or B
Connectors
953RS
955e
955LC
955S
w/ FM Approval
956
7330
7330S
952A
Differential
Consult
Factory
955A
Differential
Sensor
Dependant
7230
Consult
Factory
N/A
955S/955A
953N / 957N
952A
Differential
955D
957A, D, SSI
957D-RS
Consult
Factory
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
Principles Of Operation
Analog Version
The analog units are an industry standard and
are available with voltage or current outputs. The
output format, voltage or current, is hardware
specified. The 952, 953, 955 and 957 model LDTs
have programmable voltage and current outputs.
Voltage
10
Voltage
10
Current
20
Distance
Distance
Distance
Full Stroke
Full Stroke
Control Pulse
The control pulse signal interface is a differential
RS422 output. The maximum cable length for the
differential digital LDT is 1,500 feet. To initiate a start
pulse, an external device is used. This start pulse
Current
20
Full Stroke
Distance
4
Full Stroke
1 MICROSECOND (RECOMMENDED)
0.2 MICROSECONDS (MINIMUM)
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
Output Types
Variable Pulse (PWM)
The variable pulse signal interface is a pulse
width modulated signal (RS422). The maximum
cable length for the differential LDT is 1,500 feet.
The LDT can also be configured for external or
internal interrogation. External interrogating is
when an external device connected to the LDT
generates a start pulse. This start pulse should be
a minimum of 1.0 microsecond in duration. Within
50 nanoseconds after the leading edge of the start
pulse has been received, the LDT will generate
an output pulse. The duration of the output pulse
is proportional to the distance from the magnet
to the hex head. The order of these two pulses
is illustrated below. The LDT can also generate
internal interrogations. This LDT will continually
output pulse width modulated signals. As with an
LDT using an external interrogation, the duration of
this output pulse is proportional to the distance from
the magnet to the hex head.
1 MICROSECOND (RECOMMENDED)
0.2 MICROSECONDS (MINIMUM)
EXTERNAL INTERROGATION
1 MICROSECOND (RECOMMENDED)
0.2 MICROSECONDS (MINIMUM)
INPUT (INTERROGATION)
WIDTH OF PULSE IS PROPORTIONAL TO
DISTANCE BETWEEN MAGNET AND HEX HEAD
OUTPUT PULSE
1 MICROSECOND (RECOMMENDED)
0.2 MICROSECONDS (MINIMUM)
INTERNAL INTERROGATION
WIDTH OF PULSE IS PROPORTIONAL
TO DISTANCE BETWEEN MAGNET AND HEX HEAD
OUTPUT PULSE
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
Output Types
SSI (Synchronous Serial Interface)
Displacement value is encoded into a 24, 25 or
26 Bit format and transmitted at high speeds.
Synchronization in a closed loop system is made
easy. A clock pulse train from a controller is used
to gate out sensor data: one bit of position data is
transmitted to the controller per one clock pulse
received by the sensor. The absolute position data
is continually updated by the sensor and converted
by the shift register into serial information. The
sensors fulfill all requirements to the SSI standard
for absolute encoders.
Position Measurement
Quadrature Output
A new method of interfacing magnetostrictive
transducers offers an interface as common as
analog with the speed and accuracy of a digital
pulsed type signaling. The Gemco quadrature
LDTs provide quadrature output directly from the
transducer to the controller. The output from the
transducer can be wired directly to any incremental
encoder input or counter card, without the need for
a special converter module or PLC interface card
designed specifically for use with pulsed output
magnetostrictive transducers. The quadrature output
has the A, B and Z outputs. These outputs
are differential (also known as balanced), which
means that the connection for each output consists
of two signal wires. These are typically described
as the plus and minus signals. For example, the
A channel consists of A+ and A-. The same
applies to the B and Z channels. For these
(differential) outputs, the signal is measured with the
reference to the other signal (i.e. the difference or
differential). For example, if the A+ single voltage
is greater than the A- signal, channel A is a logic
0. Again, this applies to the B and Z channels
as well. Differential type signals are much less
prone to interference caused by electrical noise
or ground loops more often found in single ended
signal connections. Line drivers are also available
for driving single ended inputs that are not TTL
compatible.
+7 to 30 V
Input
Power
Supply
0V
4.7K
10
470
10
4.7K
+A
-A
12V
RS-422
10
SSI Data (+)
10
SSI Data (-)
+B
-B
12V
+Z
-Z
12V
Ferrite
Filter
Power Supply (+)
Input
Power
Supply
33V
Common
Min. 16 s
Clock (+)
Data (+)
MSB
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
LSB
FACTORY AUTOMATION
Output Types
10
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
950IS
Specifications
Input Voltage/
Current Draw
Output
0 to 10 VDC or 10 to 0 VDC
4 to 20mA or 20 to 4mA
Linearity
.01
Repeatability
Operating Temperature
Head Electronics
-10 to 180 F
(-23 to 82 C)
Guide Tube
-40 to 185 F
(-40 to 85 C)
Operating Pressure
Span Length
1 to 300
Null Zone
Dead Band
Connectors
2 Pin 12mm
Enclosure
IP65
Specifications are subject to change without notice.
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
11
FACTORY AUTOMATION
0120
Stroke Length
950IS
950IS
Intrinsically
Safe LDT
Insert stroke length to 0.1 inch. Enter as a fourplace number. Example: A 12.0 stroke enters
as 0120. To convert metric strokes, multiply
millimeter value by 0.03937 for inch value.
9501446
24
0120
Analog
Transceiver for
950IS LDT
24
115
230
Input Voltage
24 VDC
115 VAC
230 VAC
Stroke Length
Insert stroke length to 0.1 inch. Enter as a fourplace number. Example: A 12.0 stroke enters
as 0120. To convert metric strokes, multiply
millimeter value by 0.03937 for inch value.
9501445 Configuration
Outputs
I.S. Barrier
Approved
Conduit
Seal
Input
Voltage
12
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
1 2
MIN.R.
SPAN
XDUCER +
XDUCER -
SLAVE INPUT
O-1O (V1)
GROUND SHIELD AT
CONTROLLER
END ONLY.
3 4
1O-O (V2)
TO ASSOCIATED EQUIPMENT
ISOLATED OUTPUT
(1O MA. MAXIMUM)
NEMA ENCLOSURE
AS SPECIFIED
(OPEN CHASSIS
AVAILABLE)
1 2
+ 4-20 MA
LEVEL
MODE
(INSTALLED) *
1
120 V 6O HZ
L N
G
3 4
RANGE
MODE
2
24O V 6O HZ
L1 L2
G
TRANSMITTER
950 1446
G
O-1O
1O-O
TO 120 VOLT
6OHZ A. C. LINE
L2
(6 VA. MAXIMUM)
L1
CABLE PARAMETERS
A. USE CONDUIT WITH CABLE INSIDE.
B. NO OTHER WIRES TO BE IN CONDUIT.
C. UP TO 1OOO FEET- #22 AWG OR GREATER, TWISTED SHIELDED
CABLE, CAPACITY LESS THAN 6O PICOFARAD PER FOOT,
INDUCTANCE LESS THAN .2 MICROHENRIES PER FOOT.
D. UP TO 25OO FEET- TWIN AXIAL BELDEN 9182 OR EQUAL. (8.8 PICO
FARADS PER FOOT).
B
Y
CALIBRATION INSTRUCTIONS
64 FOOT CABLE WITH CORD GRIP
7.81"
3/4-16 THREAD
MINIMUM
RANGE
POSITION "A"
1.28" DIAMETER
MAGNET ASSEMBLY
2O
MA.
0
10
VOLTS VOLTS
O%
GENERAL INFORMATION
DECREASING
V1
MODE
MAXIMUM ACTIVE
LENGTH OF
MAGNET MOVEMENT
(STROKE LENGTH
IN INCHES)
4
MA.
1OO%
.31"
TUBE LENGTH
TO 240 VOLT
60HZ AC LINE
(6 VA MAX)
(OPTIONAL,
ONLY WHEN
ORDERED)
NOTES
NON-HAZARDOUS LOCATION
HAZARDOUS LOCATION
CLASS I, DIV. 1, GROUP C & D
CLASS II, DIV. 1, GROUP E, F & G
CLASS III, DIV. 1
TRANSMITTER
950 1446
APPROVED SEAL
950IS
950IS
NOT USED
GND
GROUND TO
PANEL
V2
INCREASING
MODE
SPAN
GUIDE TUBE
316 S.S.
.40 DIA.
POSITION "B"
LOWER ANALOG RANGE
O%
1OO%
4
MA.
10
0
VOLTS VOLTS
20
MA.
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
13
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
13
FACTORY AUTOMATION
950MD
14
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
950MD
Optional
Bellows Boot
Optional Water-Cooled
Head Assembly
Optional
Stainless Boot
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
15
FACTORY AUTOMATION
950MD
16
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
0B
0C
Active Stroke in
Inches
Determine the active
stroke to be measured
followed by A.
C5A
Connector
Standard 1/2 inch NPT conduit fitting
(It is suggested to order a quick disconnect connector
on the LDT)
Environmental 10 pin MS connector and mate on side
of housing (for use with 951, 952, and 953 LDTs with
connector option E only)
5 Pin, 12mm, Euro Connector on Side of Housing (for
952A /953A w/connector option S only)
6 Pin, 12mm, Euro Connector on Side of Housing (for
953D and SSI w/connector option S only)
10 Pin STD - to 953A 5 Pin Euro
C5D
NC
CGP
CGA
CGB
CGC
C2
Fully Retracted
Overstroke in Inches
Insert length of retract overstroke
in inches followed by B. If no
retract overstroke is required,
simply insert 0B.
Fully Extended
Overstroke in Inches
Insert length of extend overstroke in
inches followed by C If no extend
overstroke is required insert 0C
C3
C4
Options
X
None
B1
B2
B3
R
F
RS
FS
L
SB
A
950MD
950MD
Accessories
940
Yes
Item
Part Number
950IS
Consult Factory
Vortex Cooler
04578009
951
04578010
952
04570140
953
C0903400
955
04521407
7330
Consult Factory
04521372
ReadyLink
Consult Factory
04521568
SD0452400
SD0563300
Part Number
Cable Assembly with Mate for Option C2, C5S, and C5D
Connector Styles, 6 Feet
SD0439700L6
949013L6
949031L6
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
17
FACTORY AUTOMATION
950MD
Standard 950MD
18
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
950MD
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
19
FACTORY AUTOMATION
952 BlueOx
Magnetostrictive LDT
for High Shock and Vibration Areas
Gemco brand position sensing products have been
known for survival in harsh industrial environments.
We have taken over twenty years experience in
magnetostrictive linear sensors and married it with
our understanding of rugged industrial sensors to
develop the BlueOx LDT as the industrys first truly
rugged magnetostrictive linear transducer.
952
Specifications
Input Voltage
Current Draw
Output
Resolution
Internal
Analog Output
0.001
16 Bit (1 part in 65,535)
Linearity
Repeatability
Hysteresis
Operating Temperature
Head Electronics
Guide Tube
Operating Pressure
Span Length
2 to 168
Null Zone
Dead Band
2.5
Connectors
Update Time
Analog
Digital
Enclosure
Approvals
20
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
952 BlueOx
Dimension Drawing
.30 DIA.
METAL CIRCULAR
CONNECTOR
CABLE
PIGTAIL
952
2.00
1.75 DIA.
COVER &
HEX
3.00
.38
3/4-16
X 1.00 THRD.
W/ ESNA JAM NUT
2.00
NULL
VITON O-RING
FOR 1/2" DIA.
TUBE BOSS SEAL.
.31
STROKE
1.28 DIA.
MAGNET
.4O DIA.
TUBE
2.50
DEAD BAND
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
21
FACTORY AUTOMATION
952A BlueOx
Part Numbering
952A
0120
V0
Analog
BlueOx
V0
Output
0 to 10 VDC
N_
V1
10 to 0 VDC
C4
4 to 20mA
C2
20 to 4mA
D0
Differential 0 to 10 VDC*
Null Zone
Standard 2 inches.
Insert non-standard Null Zone over
2 inches. (Add non-standard portion
of Null length to stroke length to
calculate list price)
Connector Option
Standard 12mm 5 pin Euro connector
S
( CE Approved )*
Environmental MS connector*
E
Potted pigtail cable assembly, insert
C_ pigtail length in feet. Example: C6 = 6
foot cable.
Threaded metal connector
T
TM
(fits MTS - RB on Tempo II or III)
Non-corrosive Stainless Steel, 12mm
NC 5 Pin Euro Connector and Cover. Use
cable P/N 949013 straight connector.
Consult factory for other connector options.
Stroke Length
D1 Differential 4 to 20mA*
*Analog differential output is the
difference between two magnets,
minimum distance is 2.5
952
D_
Dead Band
Standard 2.5 inches.
Insert non-standard Dead Band over
2.5 inches. (add non-standard portion
of Dead Band length to stroke length
to calculate list price)
Wiring Diagram
Option S
Use Euro Connector (micro 12 mm single
keyway) cordsets, available from most connector
manufacturers or purchased from Ametek.
Program Input
(white wire)
Power 15 to 30 VDC
(brown wire)
Position Common
(gray wire)
Position
Output
(black wire)
22
PIN- B
BLACK
PIN- C
RED
PIN- K
GRAY
PIN- E
BROWN
PIN- F
BLUE
PIN- A
WHITE
PIN- G
ORANGE
PIN- D
GREEN
PIN- H
YELLOW
PIN- J
PURPLE
POWER SUPPLY
COMMON
+15/+30 VDC
POWER INPUT
POSITION COMMON
POSITION OUTPUT
PROGRAM INPUT
NO CONNECTION
NO CONNECTION
NO CONNECTION
2nd POSITION COMMON
2nd POWER SUPPLY
COMMON
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
952CP BlueOx
Part Numbering
952CP
0120
Control Pulse
BlueOx
X
N_
Null Zone
Standard 2 inches.
Insert non-standard Null Zone over
2 inches. (Add non-standard portion
of Null length to stroke length to
calculate list price)
Stroke Length
X
D_
E
C_
Connector Option
Environmental MS connector*
Potted pigtail cable assembly, insert
pigtail length in feet. Example: C6 = 6
foot cable.
Dead Band
Standard 2.5 inches.
Insert non-standard Dead Band over
2.5 inches. (add non-standard portion
of Dead Band length to stroke length
to calculate list price)
952
Wiring Diagram
PIN-OUT FOR STANDARD
CIRCULAR CONNECTOR
AT TRANSDUCER HEAD
PIN-C
RED
PIN-B
BLACK
PIN-J
PURPLE
PIN-K
GRAY
PIN-A
WHITE
PIN-F
BLUE
PIN-E
BROWN
PIN-D
GREEN
PIN-G
ORANGE
PIN-H
YELLOW
-GATE
NO CONNECTION
NO CONNECTION
NO CONNECTION
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
23
FACTORY AUTOMATION
952VP BlueOx
Part Numbering
952VP
0120
Variable Pulse
BlueOx
Stroke Length
D_
Dead Band
Standard 2.5 inches.
Insert non-standard Dead Band over
2.5 inches. (add non-standard portion
of Dead Band length to stroke length
to calculate list price)
I
E
001
Interrogation Mode
Internal Interrogation
IExternal Interrogation
Recirculations Required
001 (standard) to 127
Connector Option
Environmental MS connector*
Potted pigtail cable assembly, insert
C_ pigtail length in feet. Example: C6 = 6
foot cable.
Threaded metal connector
T
TM
(fits MTS - RB on Tempo II or III)
Consult factory for other connector options.
E
Null Zone
Standard 2 inches.
Insert non-standard Null Zone over
2 inches. (Add non-standard portion
of Null length to stroke length to
calculate list price)
952
N_
PIN- C
RED
PIN- B
BLACK
PIN- J
PURPLE
PIN- K
GRAY
PIN- A
WHITE
PIN- F
BLUE
PIN- E
BROWN
PIN- D
GREEN
PIN- G
ORANGE
PIN- H
YELLOW
-GATE
NO CONNECTION
NO CONNECTION
NO CONNECTION
24
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
952RS BlueOx
Part Numbering
0120
RS422 Start/Stop
with Interrogation
Start Sequence Pulse
BlueOx
X
D_
Stroke Length
Dead Band
Standard 2.5 inches.
Insert non-standard Dead Band over
2.5 inches. (add non-standard portion
of Dead Band length to stroke length
to calculate list price)
X
N_
Null Zone
Standard 2 inches.
Insert non-standard Null Zone over
2 inches. (Add non-standard portion
of Null length to stroke length to
calculate list price)
Connector Option
Environmental MS connector*
Potted pigtail cable assembly, insert
C_ pigtail length in feet. Example: C6 = 6
foot cable.
Threaded metal connector
T
TM
(fits MTS - RB on Tempo II or III)
Consult factory for other connector options.
E
952
952RS
Wiring Diagram
PIN-OUT FOR STANDARD
CIRCULAR CONNECTOR
AT TRANSDUCER HEAD
PIN-C
RED
PIN-B
BLACK
PIN-J
PURPLE
PIN-K
GRAY
PIN-A
WHITE
PIN-F
BLUE
PIN-E
BROWN
PIN-D
GREEN
PIN-G
ORANGE
PIN-H
YELLOW
-GATE
NO CONNECTION
NO CONNECTION
NO CONNECTION
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
25
FACTORY AUTOMATION
952
26
Specifications
Input Voltage
Current Draw
Output
Inputs
10 to 30 VDC
Resolution
0.001
Linearity
Repeatability
Hysteresis
Operating Temperature
Head Electronics
Guide Tube
Operating Pressure
Span Length
2 to 168
Null Zone
2.0
Dead Band
2.5
Connectors
Update Time
Enclosure
IP67
Specifications are subject to change without notice.
Specifications are based on a typical 36 LDT .
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
METAL CIRCULAR
CONNECTOR
2.00
3.00
.38
2.00
NULL
2.50
DEAD BAND
STROKE
.30 DIA.
.4O DIA.
TUBE
.31
3/4-16
X 1.00 THRD.
W/ ESNA JAM NUT
VITON O-RING
FOR 1/2" DIA.
TUBE BOSS SEAL.
1.28 DIA.
MAGNET
952
CABLE
PIGTAIL
1.75 DIA.
COVER &
HEX
Wiring Diagram
PIN-OUT FOR STANDARD
CIRCULAR CONNECTOR
AT TRANSDUCER HEAD
PIN- B
BLACK
PIN- C
RED
PIN- K
GRAY
PIN- E
BROWN
PIN- F
BLUE
PIN- A
WHITE
PIN- G
ORANGE
PIN- D
GREEN
PIN- H
YELLOW
PIN- J
PURPLE
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
POWER SUPPLY
COMMON
+15/+26 VDC
POWER INPUT
BZA+
BURST INPUT
AZ+
B+
ZERO INPUT
27
FACTORY AUTOMATION
0120
1000
Quadrature
BlueOx
E
Stroke Length
Insert stroke length to 0.1 inch.
Enter as a four-place number.
Example: A 12.0 stroke enters as
0120. To convert metric strokes,
multiply millimeter value by
0.03937 for inch value.
952
X
N_
C
T
D_
Dead Band
Standard 2.5 inches.
Insert non-standard Dead Band over
2.5 inches. (add non-standard portion
of Dead Band length to stroke length
to calculate list price)
E
C_
M1
Input
Sinking
(typically used with
sourcing output type)
Sourcing
(typically used with
sinking output type)
TTL Level
X
Options
None
Null Zone
Standard 2 inches.
Insert non-standard Null Zone over
2 inches. (Add non-standard portion
of Null length to stroke length to
calculate list price)
F7
F2
25 kHz
F3
50 kHz
F4
75 kHz
F5
100 kHz
F6
150 kHz
F7
250 kHz
F8
500 kHz
F9
1 MHz
Connector Option
Environmental MS connector*
Potted pigtail cable assembly, insert
pigtail length in feet. Example: C6 = 6
foot cable.
Output Resolution
Cycles per inch, maximum internal
resolution is 0.001 inches 1000 standard
(available range is 0001 through 9999)
M1
Output Mode
X1 quadrature, consult factory
for other output modes
V
N
D
L
28
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
Removable Cartridge
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
953
29
FACTORY AUTOMATION
Shock
953SSI Output
953D
Connector
Interface
Vibration
30 Gs (lab tested)
IEC 60068-2-6
953D Output
953A
Connector
Interface
Measuring
Length
300 750 1000 2000 5000mm
Measurements/ 3.7k 3.0k 2.3k 1.2k
0.5k
sec.
Sensor Housing
and Mounting
Hex
Controller Dependant
953A Output
Voltage
Current
Displacement
1 to 300"
Dead Band
Approvals
CE (EMC)
Null Zone
Input Voltage
7 to 30 VDC
Hysteresis
0.001
Enclosure Rating
Current Draw
Non-linearity
953SSI
Resolution
Storage Temperature
-40 to 221 F
(-40 to 105 C)
Controller Dependant
953D Repeatability
953A Repeatability
953SSI Repeatability
Operating
Temperature
Head
Guide Tube
0.00006
16-Bit
953SSI Measured
Variables
Diagnostics
953D
Resolution
953A
Resolution
Internal
Output
953
Stainless Steel
Cover and Connector
S Connector Style
5 or 6 Pin Micro, 12mm Euro
30
M Connector Style
6 Pin DIN, Fits MTS D60
7 Pin DIN, Fits MTS D70 (for SSI only)
B Connector Style
8 Pin DIN, Fits Balluff S32
C Connector Style
Integral Cable Assembly
E Connector Style
10 Pin MS Connector,
Fits Gemco 951 & 952 Wiring
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
V0
0120
V0
Output
0 to 10 VDC
V1
10 to 0 VDC
V2
-10 to 10 VDC
V3
10 to -10 VDC
V4
0 to 5 VDC
V5
5 to 0 VDC
V6
-5 to 5 VDC
V7
5 to -5 VDC
C4
4 to 20mA
C2
20 to 4mA
Null Zone
Standard 2 inches.
Insert non-standard Null Zone
(1.5 Minimum).
This value is called out in inches
regardless of units of measure
(i.e. 1.5 Null Zone = N1.5)
C_
H_
Units of Measure
Inches.
Metric
Stroke Length
Insert stroke length to 0.1 inch. Enter as a four-place
number. Example: A 12.0 stroke enters as 0120.
OR
Insert stroke in millimeters to 1mm. Enter as a
four-place number. Example: 305mm stroke entered
as 0305M. Metric length includes metric mounting,
M18x1.5. Unless Specified Otherwise.
X
D
Connector Option
S
Blank
M
Dead Band
Standard 2.5 inches.
Insert non-standard Dead
Band (2.25 Minimum)
This value is called out in
inches regardless of units
of measure (i.e. 2.25
Dead Band = D2.25)
X
S
Options
None
Stainless Steel cover and
connector. Only available
with connector options S,
C, and H.
Blank
US Threads with
raised face hex
base
US Threads with
flat face hex base
Sensor cartridge
only - No hex base
VP
Units of Measure
Blank Inches
M
Metric
Stroke Length
1" to 300". Insert stroke length to 0.1 inch. Enter
as a four-place number. Example: A 12.0 stroke
enters as 0120.
OR
Insert stroke in millimeters to 1mm. Enter as
a four-place number. Example: 305mm stroke
entered as 0305. Metric length includes metric
mounting, M18x1.5. Unless Specified Otherwise
X
N
X
D
S
C_
M
B
E
H_
Null Zone
Standard 2 inches.
Insert non-standard Null Zone
(1.5 Minimum).
This value is called out in
inches regardless of units of
measure (i.e. 1.5 Null Zone
= N1.5)
Dead Band
Standard 2.5 inches.
Insert non-standard Dead Band
(2.25 Minimum)
This value is called out in inches
regardless of units of measure (i.e.
2.25 Dead Band = D2.25)
Connector Option
Standard 6 Pin, 12mm Euro
Integral Cable Assembly. Insert length in feet. Example: C6 =
6 foot cable.
7 Pin DIN, MTS Style D70
Data Length
24 Bits
1
2
25 Bits
26 Bits
X
Options
X
None
Data Format
Binary
B
G
Blank
Gray
US Threads with
raised face hex
base
US Threads with
flat face hex base
Direction
Measures Direction Forward
Sensor cartridge
only - No hex base
Position Update
Synchronous
Asynchronous
Resolution
.005mm
.01mm
.05mm
.1mm
.02mm
.002mm
.001mm
.00005"
.0001"
.0005"
.001"
953
953S
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
31
FACTORY AUTOMATION
CP
RS
TP
RS
0120
Output
Control Pulse
Stroke Length
Insert stroke length to 0.1 inch. Enter as a four-place
number. Example: A 12.0 stroke enters as 0120.
OR
Insert stroke in millimeters to 1mm. Enter as a
four-place number. Example: 305mm stroke entered
as 0305M. Metric length includes metric mounting,
M18x1.5. Unless Specified Otherwise
X
N
Dead Band
Standard 2.5 inches.
Insert non-standard Dead
Band (2.25 Minimum)
This value is called out in
inches regardless of units
of measure (i.e. 2.25
Dead Band = D2.25)
Options
None
Stainless Steel cover and
connector. Only available
with connector options S,
C, and H.
X
S
Blank
Connector Option
Null Zone
Standard 2 inches.
Insert non-standard Null Zone
(1.5 Minimum).
This value is called out in inches
regardless of units of measure
(i.e. 1.5 Null Zone = N1.5)
Units of Measure
Blank Inches.
M
C_
Environmental 10 Pin MS
Connector compatible w/951
& 952 LDTs w/connector
option E.
H_
Metric
US Threads with
raised face hex
base
US Threads with
flat face hex base
Sensor cartridge
only - No hex base
953
VP
VP
0120
Output
Variable Pulse
X
D_
Stroke Length
Insert stroke length to 0.1 inch. Enter as a
four-place number. Example: A 12.0 stroke
enters as 0120.
OR
Insert stroke in millimeters to 1mm. Enter as
a four-place number. Example: 305mm stroke
entered as 0305M. Metric length includes
metric mounting, M18x1.5. Unless Specified
Otherwise
M
B
C_
Metric
001
Dead Band
Standard 2.5 inches.
Insert non-standard Dead Band
(2.25 Minimum)
This value is called out in inches
regardless of units of measure
(i.e. 2.25 Dead Band = D2.25)
Connector Option
Standard 6 Pin, 12mm Euro
Integral Cable Assembly. Insert length in
feet. Example: C6 = 6 foot cable.
6 Pin DIN, MTS Style D60
Units of Measure
Blank Inches.
Null Zone
Standard 2 inches.
X
S
Options
None
Stainless Steel cover and
connector. Only available
with connector options S,
C, and H.
Blank
US Threads with
raised face hex
base
US Threads with
flat face hex base
Sensor cartridge
only - No hex base
Number of Recirculations
001
Interrogation Mode
Internal Interrogation
I
External Interrogation
E
32
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
953
953A
953D
953SSI
Flashing Red
Flashing Red/Green
EE memory corrupt
EE memory corrupt
EE memory corrupt
Flashing Green
N/A
N/A
N/A
Flashing Yellow
Communication/programming mode
Communication/programming mode
Communication/programming mode
Solid Red
N/A
Solid Green
Solid Yellow
N/A
N/A
N/A
N/A
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
33
FACTORY AUTOMATION
953A Accessories
Part Number
Description
Part Number
Description
SD0400800
949011L6
SD0480900
949011L12
S
S
SD0403900
949012L6
SD0411201
949012L12
SD0411200
SD0553200LXX
6 Pin DIN
SD0410300
SD0553300LXX
SD0410301
SD0553400LXX
M0750500
SD0400800
All
M0822400
MO822401
Teflon-cylinder Bushing
.53
N
S
953D/953SSI Accessories
.331 TYP.
N
N
.662 TYP.
953
.187
4 PLACES
Part Number
Description
949029L6
949029L12
949030L6
949030L12
SD0554500LXX
SD0558500LXX
SD0554600LXX
8 Pin DIN
All
SD0400800
.31
1.29
1 MBd
10 ft.
3m
400 kBd
160 ft.
50 m
300 kBd
320 ft.
100 m
200 kBd
650 ft.
200 m
100 kBd
1300 ft.
400 m
NOTE: The maximum cable length recommendation is 10 meters or 33 feet. Longer cables are available, but
extra care must be taken while handling and installing.
34
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
Specifications
Input Voltage
Current Draw
100mA Max.
Output
0 to 10 VDC
10 to 0 VDC
4 to 20mA
20 to 4mA
Linearity
Accuracy
Repeatability
Operating Temperature
-20 to 70 C
Span Length
6 to 180
Null Zone
3.00
Dead Band
1.50
Connector
Agency Approvals
CE Approved
955
IP67
Enclosure
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
35
FACTORY AUTOMATION
Part Numbering
955LC
V0
V0
Output
0 to 10 VDC
V1
10 to 0 VDC
C4
4 to 20mA
C2
20 to 4mA
955LC BRIK
Wiring Diagram
0120
Stroke Length
Insert stroke to 0.1 as a four-place number, enter
12.0 stroke as 0120; to convert metric strokes,
multiply millimeter value by 0.03937 for inch value.
Power 24VDC
(brown wire)
Accessories
Part Number
Slide Magnet
SD0521800
Floating Magnet
SD0522100
SD0551500
Mounting Foot
SD0522000
949001L6
949001L12
949002L6
949002L12
Program Module
955-1412
4
Output
(black wire)
Ground
(blue wire)
Connector View
Sensing Surface
955
Item
36
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
The transducer can be mounted vertically or horizontally using our mounting feet which slide on the lower
part of the extrusion and clamp down when tightened.
This packaging provides a compact and easy method of
mounting for machine builders.
The 955 eBrik II is designed for applications where
economical continuous feedback is necessary. The
sensor can be a cost effective replacement to linear
potentiometers, limit and proximity sensors.
Applications include presses, blow molding, injection
molding, extruding, roll positioning, tire press, and many
more.
All units are provided with our standard 5 pin 12mm Euro
Micro connector, mounting feet and magnet assembly.
Mating cables are sold in various lengths and must be
ordered separately.
The 955 eBrik II has a few truly unique features. One
feature is the LDTs auto-tuning capability, the ability to
sense the distance between the magnet and the sensing
surface and adjust its signal strength accordingly. As a
bonus feature, the 955 eBrik II offers Programmability, the ability to rescale the Zero and Span positions
or invert the positions in the field. This is an optional
feature and must be called out at time of order under the
Options field. All units come fully programmed from the
factory, are 100% absolute, and do not require reprogramming unless desired. There is a unique diagnostic
that is built into the analog output on every unit. If there
is a loss of magnet, or if the magnet assembly moves
beyond the programmed range, the analog output will
transmit a fault voltage or current, warning the host controller that it is out of range.
955
Current Draw
Output
0 to 10 VDC
10 to 0 VDC
4 to 20 mA
20 to 4 mA
Non-Linearity
Resolution
Update Time
1 ms
Repeatability
.001%
Operating Temperature
-40 to 85 C
Span Length
1 to 74
Null Zone
3.03
Dead Zone
2.75
Connectors
Enclosure
IP67
Approvals
CE
Shock
Vibration
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
37
FACTORY AUTOMATION
Part Numbering
955e
955 eBrik II
0120
FM
Stroke Length
Insert stroke length to 1 inch
or 25mm. Enter as a fourplace number. Example:
A 12.0 stroke is entered
as 0120 (E) or 100mm is
entered as 0100 (M).
Units of Measure
E = English US inches
M = Metric
Magnet Type
FM = Floating Magnet (Standard)
SM = Slide Magnet Top Swivel
SF = Slide Magnet Front Swivel
X = No Magnet
Options
X = No Options
P = Programmable
Zero & Span
V0
Output Type
V0 = 0 to 10
V1 = 10 to 0
C2 = 20 to 4mA
C4 = 4 to 20mA
955
Dimension Drawing
Accessories
Item
PIN Number
Function
Color
SD0521800
BROWN
PROGRAM*
WHITE
Slide Magnet
38
Wiring Diagram
Part Number
SD0551500
BLUE
Mounting Foot
SD0522000
ANALOG OUT
BLACK
949019L6
ANALOG COMMON
GRAY
949019L12
949020L6
949020L12
Control Arm
955ARMXX (X = Inches)
Rod Ends
04-570252
LDT
Connector
End View
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
Specifications
Input Voltage
10 to 30 VDC
Current Draw
100mA Max.
Output
V0 = 0 to 10 VDC
V1 = 10 to 0 VDC
V2 = -10 to 10 VDC
V3 = 10 to 10 VDC
V4 = 0 to 5 VDC
V5 = 5 to 0 VDC
V6 = -5 to 5 VDC
V7 = 5 to -5 VDC
C4 = 4 to 20mA
C2 = 20 to 4mA
Linearity
Accuracy
Repeatability
Operating Temperature
Span Length
4 to 180
Null Zone
Dead Band
1.5
Connectors
Enclosure
Approvals
955
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
39
FACTORY AUTOMATION
955
Sensing Surface
Wiring Diagram
Use Euro Connector
(micro 12 mm single
keyway) cordsets, available
from most connector
manufacturers or purchased
from Ametek. Install
according to the following
diagram:
40
Program Input
(white wire)
Power 10 to 30 VDC
(brown wire)
2
Ground
(blue wire)
Output
(black wire)
Connector View
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
V0
V0
Output
0 to 10 VDC
V1
10 to 0 VDC
V2
-10 to 10 VDC
V3
10 to -10 VDC
V4
0 to 5 VDC
V5
5 to 0 VDC
V6
-5 to 5 VDC
V7
5 to -5 VDC
C4
4 to 20mA
C2
20 to 4mA
0120
V0
Stroke Length
Options
Leave blank for no options.
Wet environment, electronics sealed
to IP68 rating
Accessories
Item
Part Number
SD0521800
SD0521801
Floating Magnet
SD0522100
SD0551500
Mounting Foot
SD0522000
949001L6
949001L12
949002L6
949002L12
Control Arm
955ARMXX (X = Inches)
955-1409
955
Slide Magnet
04-570252
FM Accessories
6 Ft., 4 Pin Straight Cable
949024L6
949024L12
Connector Lock
04-521570
NOTE: FM approved cordset and connector lock must be used and installed per drawing
E0241100 when installing the 955S in Class I, Div 2, Group A, B, C, D applications.
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
41
FACTORY AUTOMATION
955
42
Specifications
Input Voltage
13.5 to 30 VDC
Current Draw
Output
Resolution
Internal
Analog Output
0.001
16 Bit (1 part in 65,535)
Linearity
Repeatbility
Hysteresis
Update
50 or less
51 to 100
101 to 150
151 to 180
Operating Temperature
-20 to 70 C
Span Length
5 to 180
Null Zone
3.00
Dead Band
2.00
LED
Connector
Approvals
CE
Enclosure
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
V0
V0
Output
0 to 10 VDC
0120
X
Stroke Length
V1
10 to 0 VDC
C4
4 to 20mA
C2
20 to 4mA
D0
Differential 0 to 10 VDC*
D1
Differential 4 to 20mA*
Options
Power 10 - 30VDC
(brown wire)
1
5
Power Supply
Common
(blue wire)
Item
Part Number
Slide Magnet
SD0521800
Floating Magnet
SD0522100
SD0551500
Mounting Foot
SD0522000
949019L6
949019L12
949020L6
949020L12
955
No options.
Accessories
Wiring Diagram
Program Input
(white wire)
Output
(black wire)
Connector View
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
43
FACTORY AUTOMATION
955
Specifications
Input Voltage
13.5 to 30 VDC
Current Draw
Output
Resolution
Controller Dependent
Linearity
Repeatbility
Hysteresis
Update
Controller Dependent
Operating Temperature
-20 to 70 C
Span Length
5 to 180
Null Zone
3.00
Dead Band
2.00
LED
Connector
Approvals
CE
Enclosure
44
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
0120
CP
Stroke Length
CP
Output
Control Pulse
RS
955D
VP
VP
0120
Output
Variable Pulse
Stroke Length
001
Interrogation Mode
Internal Interrogation
External Interrogation
Options
No options.
Wet environment, electronics
sealed to IP68 rating
X
E
Number of Recirculations
Options
No options.
Wet environment,
electronics sealed to IP68
rating
955
Accessories
Item
Part Number
Slide Magnet
SD0521800
Floating Magnet
SD0522100
SD0551500
Mounting Foot
SD0522000
949021L6
949021L12
949022L6
949022L12
Wiring Diagram
Connector View
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
45
FACTORY AUTOMATION
955
46
Specifications
Input Voltage
13.5 to 30 VDC
Current Draw
Output
Quadrature Output A+, A-, B+, B-, Z+, ZLine Drivers: 5V or Input Power
Resolution
0.001
Linearity
Repeatbility
Hysteresis
Update
50 or less
51 to 100
101 to 150
151 to 180
Operating Temperature
-20 to 70 C
Span Length
5 to 180
Null Zone
3.00
Dead Band
2.00
LED
Connector
Approvals
CE
Enclosure
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
1000
Stroke Length
Insert stroke to 0.1 as a four-place
number, enter 12.0 stroke as 0120.
OR
Insert stroke in millimeters to 1mm.
Enter as a four-place number
followed by M. Example: 305mm
stroke entered as 0305M.
Connector Option
Euro 12 Pin, 12mm connector
A2
2 kHz
A3
5 kHz
F1
10 kHz
F2
25 kHz
F3
50 kHz
F4
75 kHz
F5
100 kHz
F6
150 kHz
F7
250 kHz
F8
500 kHz
F9
1 MHz
X1
D1
Output Resolution
Cycles per inch, maximum internal
resolution is 0.001 inches 1000 standard
(available range is 0001 through 9999)
E
C
T
Input
Sinking (typically used with
sourcing output type)
Sourcing (typically used with
sinking output type)
TTL Level
Accessories
Item
Part Number
Slide Magnet
SD0521800
Floating Magnet
SD0522100
SD0551500
Mounting Foot
SD0522000
949023L6
949023L12
Control Arm
X1
955DQ
Quadrature
F7
04-570252
X
E
D
L
Options
None
Wet environment,
electronics sealed to
IP68 rating, connector
option E only
Output Drivers
Differential RS422 line driver,
TTL compatible
Differential line driver
10 to 30 VDC, V out = V in
(LDT Power) -1 Volt
Output Mode
X1 quadrature, consult factory
for other output modes
Dual magnet, difference
between magnets
V
N
955
955DQ
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
47
FACTORY AUTOMATION
955
Sensing Surface
48
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
Another feature is that the analog output is programmable over the entire active stroke length. The active
stroke area of the LDT lies between the Null Zone and
the Dead Band.
There is also a diagnostic LED located at the connector
to minimize setup time and troubleshooting. The LED is
green in normal operation. Red will indicate no magnet
present or that the magnet has moved out of sensing
range. Yellow is an indication the magnet is out of the
programmed active range or if no interrogation signal is
detected.
The enclosure comes standard as IP67; however, upgrading to IP68 is available as an option so the LDT can
be used in wet environments.
Note: The Pneumatic cylinder must have a magnet in
order to work. Each cylinder manufacturer uses different types of magnets. In most cases the cylinder supplier
installs the magnet so that the South Pole is facing out.
To date, we have successfully worked with most brands
of pneumatic
cylinders. Consult AMETEK APT for a list of compatible
cylinder manufacturers. Call 800.635.0289 to speak with
a Sales Engineer.
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
955
The 955C BRIK GEN III has truly unique features. The
first one being the LDTs auto-tuning capability: the ability to sense a magnet within the pneumatic cylinder and
adjust its signal strength accordingly.
49
FACTORY AUTOMATION
LDT Specifications
SPECIFICATIONS
Input Voltage
Current Draw
13.5 to 30 VDC
Output
Resolution
Internal:
Analog Output:
Digital Output:
Quadrature:
Non-Linearity
Repeatability
Hysteresis
Update
Analog
50 or less:
51 to 100:
101 to 150:
151 to 180:
1ms
2ms
3ms
4ms
Controller Dependent
-20 to 70 C
5" to 180"
3.00"
2.00"
Tricolor diagnostic LED for communication of
LDT status.
Connector
955CA: Standard 5 Pin Micro 12mm Euro Connector
955CD: Standard 6 Pin Micro 12mm Euro Connector
955C DQ: Standard 12 Pin Micro (option E)
Approvals
Enclosure
Digital
Operating Temperature
Span Length
Null Zone
Dead Zone
LED
955
0.001
16 Bit (1 part in 65,535)
Controller Dependent
0.001
CE
IP 67
IP 68 Optional
Specifications are subject to change without notice.
Specifications are based on a typical 36 LDT.
50
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
955CA
955CA Analog BRIK Gen III
Cylinder Magnet Polarity
0120
V0
Output Type
V0 = 0 to 10 VDC
V1 = 10 to 0 VDC
C4 = 4 to 20 mA
C2 = 20 to 4 mA
Stroke Length
Insert stroke to 0.1 as a four-place
number, enter 12.0 stroke as 0120.
OR
Insert stroke in millimeters to 1mm.
Enter as a four-place number
followed by M. Example: 305mm
stroke entered as 0305M.
Options
No options
Wet environment, electronics
sealed to IP68 rating
955
Dimension Drawing
Wiring Diagram
Part Number
SD0522000
SD0530600
SD0559200
949019L6
949019L12
949020L6
949020L12
Power Supply
Common
(blue wire)
1
4
Analog Output
Common
(grey wire)
Output
(black wire)
Connector View
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
51
FACTORY AUTOMATION
955CD
Digital
CP
0120
CP
Output
Control Pulse
RS
955CD
VP
VP
Stroke Length
Output
Variable Pulse
0120
Options
No options
Wet environment, electronics
sealed to IP68 rating
001
Interrogation Mode
Internal Interrogation
External Interrogation
X
E
Stroke Length
955
Options
No options
Wet environment,
electronics sealed to IP68
rating
Number of Recirculations
001 (Standard) to 127
Wiring Diagram
Accessories for 955CD
Item
Part Number
SD0522000
SD0530600
SD0559200
949021L6
949021L12
949022L6
949022L12
Connector View
52
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
1000
F7
X1
955CDQ
Quadrature
A1
Cylinder Magnet Polarity
A2
A3
F1
F2
F3
F4
F5
F6
F7
Stroke Length
F8
F9
1 kHz
2 kHz
5 kHz
10 kHz
25 kHz
50 kHz
75 kHz
100 kHz
150 kHz
250 kHz
500 kHz
1 MHz
X1
D
L
Options
No options
Wet environment, electronics
sealed to IP68 rating,
connector option E only
Output Drivers
Differential RS422 line driver,
TTL compatible
Differential line driver
10 to 30 VDC, V out = V in
(LDT Power) -1 Volt
Output Mode
X1 quadrature, consult factory
for other output modes
Connector Option
Euro 12 Pin, 12mm connector,
consult factory for others
V
Output Resolution
E
C
T
955
955CDQ
Input
Sinking (typically used with
sourcing output type)
Sourcing (typically used with
sinking output type)
TTL Level
Part Number
SD0522000
SD0530600
SD0559200
949023L6
949023L12
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
53
FACTORY AUTOMATION
956
54
Specifications
Because the 956 BLOK is an optional housing for the 955, electrical specifications are dependant
on the particular 955 sensor. See the 955 BRIK pages for specifications.
CE
Approvals
Enclosure
Accessories
Item
Part Number
Spacer Kit
Mount feet for .45 or .75 mounting
Includes two mounting feet & spacers
SD0545100
04-570256
Mounting Foot
SD0522000
04-570264
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
956LC
BLOK
956LC BLOK
LDT
Thedisplacement
956LC BLOKtransducers
linear displacement
transducers
are packaged
in an
economical
style package.
The 956LC BLOK linear
are packaged
in an economical
piston
style
package. piston
The sensing
element The
and sensing element a
are housed
in anhousing.
anodized
aluminum
housing. moves
The piston
moves
overthat
the sensing
element
electronics are housedelectronics
in an anodized
aluminum
The
piston
assembly
overassembly
the sensing
element
determines
the that determine
FACTORY
AUTOMATION
and converts
to a readable
utilizes
our field-proven
magnetostrictive
technology
to give absolu
position and convertsposition
it to a readable
output.it The
transduceroutput.
utilizesThe
ourtransducer
field-proven
magnetostrictive
technology
to give absolute
position,
to 0.01% of
the programmable
BLOK
is asensing
cost effective
linear
sensing
design
repeatable to 0.01% ofrepeatable
the programmable
sensing
distance. Thesensing
956LC distance.
BLOK is aThe
cost956LC
effective
linear
solution,
designed
forsolution,
the
market. All
are provided
a standard
quick disconnect
connector.
The in
units
canlengths
be ordered
in to
span
from
OEM market. All unitsOEM
are provided
withunits
a standard
quick with
disconnect
connector.
The units can
be ordered
span
from 6
36lengths
in
0.1available
increments
areoravailable
with- male
or female
1/4piston.
- 28 threads on the piston.
0.1 increments and are
withand
male
female 1/4
28 threads
on the
Features
No Programmable output, No
diagnostic LED, electronics
sealed to IP67, resolution 0.014
0 to 10 volts or 4 - 20mA
Stroke
Lengths
6 to 36
Null Band
3.00
3.00"
$0
0-10 VDC
$0
No -Options
- Male Piston
No Options - MaleXPiston 1/4
28 Threads.
$0 1/4 - 28 Threads.
$0
V1
10-0 VDC
$0
10-0 VDC
$0
$23
C4
4-20mA C4
$10
4-20mA
$10
F Female
Front
Metalwith
Rod End,$23
Female - used with
Front Metal Rod End,
- used
option X.
option X.
$10
20-4mA
$10
20-4mA C2
956S
BLOK
LDT$33
R Female
Rear- used
Metalwith
Rod End,$33
Female - used with
Rear Metal Rod End,
A RodTapped
Piston
Tapped Female Piston
1/4 -28Female
.
$0 Rod 1/4 -28 .
Type
Features
$37
T Rod
Stainless
Steel Rear
Rod
End used the
with
$37
T
Stainless
End
used
with
electronics are housed in an anodized aluminum housing. The piston assembly
moves Steel
overRear
the
sensing
element
that$37
determines
option A (connector end).option A (connector end).
position and converts it to a readable output. The transducer utilizes our field-proven
magnetostrictive technology to give absolute position,
repeatable to 0.01% of the programmable sensing distance. The 956S Smart BLOK has a variety of truly unique features. The analog
Stroke
Stroke
Length
output is programmable over the entire active
stroke
length, the LDT
hasLength
a diagnostic LED that remains green while a good magnet signal
Insert
stroke
tofailure.
0.1 inch.The
Enter
as acan
four-place
stroke there
length to
Enter
aslength
a four-place
is present and the LED turns Insert
red when
is 0.1
aninch.
internal
sensing
unit
easily be changed from 0 to 10 VDC into 10 to 0
number.
Example:
A
12.0
stroke
enters
number.
Example:
A
12.0
stroke
enters
as
0120.
VDC, 0 to 5 VDC into 5 to 0 VDC, 4 to 20mA into 20 to 4mA, 10 to -10 VDC into
-10asto0120.
10 VDC, or 5 to -5 VDC into -5 to 5 VDC. The unit
Tomillimeters,
convert a metric
stroke in millimeters, multiply
To convert a metric stroke in
multiply
can be ordered in span lengths
from 4
to by
360.03937
in 0.1
and
are available
withvalue.
male or female 1/4 - 28 threads on the piston.
millimeter
value
0.03937
to arrive at inch
millimeter
value
toincrements
arrive at
inchbyvalue.
956S
V0
Active Stroke
Inches
Active Stroke in Inches
ListinPrice
6.0-12.0
6.0-12.0 $585
12.1-18.0
12.1-18.0$615
18.1-24.0
0120
18.1-24.0$645
24.1-30.0
Output
V0
0 to 10 VDC
V1
10 to 0 VDC
V2
-10 to 10 VDC
V3
10 to -10 VDC
V4
0 to 5 VDC
V5
5 to 0 VDC
V6
-5 to 5 VDC
V7
5 to -5 VDC
C4
4 to 20mA
Stroke Length
30.1-36.0
List Price
$585
$615
$645
$673
X
No Options - Male Piston 1/4 - $0
Insert stroke length to 0.1 inch. Enter Longer
as a fouravailable
for vertical
applications. Consult f
lengths available forLonger
vertical
applications.
Consult
factory.
28lengths
Threads.
place number. Example: A 12.0 stroke enters as
E
Wet Environment. Electronics
$55
0120. To convert a metric stroke in millimeters,
sealed to IP 68 Rating.
multiply millimeter value by 0.03937 to arrive at
inch value.
F
Front Metal Rod End, Female - $23
used with option X.
$33
$0
956A/956D-CP
BLOK
S
Stainless Steel Front
Rod End
$37 LDT
C2
24.1-30.0$673
Options
30.1-36.0$703
20 to 4mA
Analog Version
$0
S Rod End
Stainless
Steel Front$37
Rod End used with
Stainless Steel Front
used with
option
A.sensing element and
option
A. style package.
The 956S BLOK linear displacement transducers are packaged in an economical
piston
The
Null Band
Lis
V0
0-10 VDC
at theV0
connector
Example: V0 = 0 volts at the
at the connector end. Example:
= 0 voltsend.
at the
connector end.
connector end.
4 to 36"
Options
List Price
Add
Options
List Price
Add
Analog
The firstornumber
The Version
first number denotes voltage
current denotes
level voltage or current level
Stroke
Lengths
V1
C2
956
Outputs
0120
V0
Features
Output
Output Code List Price
Add
Code
Type
V0
0120
V0
956
Outputs
956LC
956LC
956
Type
$37
The 956 BLOK linear transducers are packaged in an economical piston style package. The sensing element and electronics are housed
in an anodized aluminum housing. The piston assembly moves over the sensing element that determines the position and converts it to
a readable output.
The
transducer
utilizes
Prices
areour
List field-proven
U.S. Dollars) magnetostrictive technology to give absolute position, repeatable to 0.006% of
Effective 1/01/2015 (All Effective
Prices are1/01/2015
List U.S. (All
Dollars)
section for complete specifications
the programmable sensing distance. The 956A BLOK has a variety of truly unique features. The analog output is programmable over41the
entire active stroke length, the LDT has a diagnostic LED that remains green while aActive
good magnet
is presentList
and Price
the LED turns red
Stroke signal
in Inches
when there is an internal sensing failure. The unit can easily be changed from 0 to 10 VDC into 10 to 0 VDC, or 4 to 20mA into 20 to 4mA.
4.0 - 12.0
The unit can be ordered in span lengths from 5 to 36 in 0.1 increments and are available
with male or female$713
1/4 - 28 threads on the
12.1 - 18.0
$744
piston.
18.1 - 24.0
$772 X
956A
V0
0120
For accessories, see page 46.
956A - High Resolution
24.1 - 30.0
$803
Outputs
0 to 10 volts or 4 - 20mA
Stroke
Lengths
5 to 36"
Null Band
3.00"
Stroke Length
Options$832
List Price
30.1 - 36.0
Add
Insert stroke length to 0.1 inch. Enter as a fourplace number. Example: A 12.0 stroke enters as
X
No Options - Male Piston 1/4 $0
for vertical applications.
0120. To convert a metric stroke in millimeters, Longer lengths -available
28 Threads.
Consult factory.
multiply millimeter value by 0.03937 to arrive at
E
Wet Environment. Electronics $55
inch value.
sealed to IP 68 Rating.
Output
V0
0 to 10 VDC
V1
10 to 0 VDC
C4
4 to 20mA
C2
20 to 4mA
956A LDT List Prices
Active Stroke in Inches
42
$0
$37
List Price
5.0 - 12.0
$770
12.1 - 18.0
$800
18.1 - 24.0
$828
24.1 - 30.0
$859
30.1 - 36.0
$887
$23
0120
12.1 - 18.0
$800
18.1 - 24.0
$828
24.1 - 30.0
$859
30.1 - 36.0
$887
1/4 -28 .
S
$37
$37
FACTORY AUTOMATION
Features
Diagnostic Tri-color
LED, Electronics
sealed to IP67, IP68
optional, resolution
equal to controller
CP
Null Band
3.00"
Options
Insert stroke length to 0.1 inch. Enter as a fourplace number. Example: A 12.0 stroke enters as
0120. To convert a metric stroke in millimeters,
multiply millimeter value by 0.03937 to arrive at
inch value.
Pulse
$0
$55
$23
956D-VP, 956D-RS
956D-VP,
BLOK
956D-RS
LDT
BLOK LDT
Features
Quadrature
output, simulates
incremental
encoders, Burst
output to simplify
homing unit in
event of power loss,
Diagnostic Tri-color
LED, Electronics
sealed to IP67,
IP68 optional
5 to 36"
Null Band
3.00"
$0
$55
$23
956DQ 956DQ
BLOKBLOK
LDT LDT
AUTOMATION
& PROCESS TECHNOLOGIES
AUTOMATION & PROCESS
TECHNOLOGIES
$33
$0
Digital
Version - Quadrature
Digital Version
- Quadrature
E
F7
F7
X1
X1 DN
XD
Quadrature Cycle
Quadrature Cycle
Output
Frequency
Output
Frequency
The 956D
start/stop
pulse
BLOK
a recommended
microsecond
minimum
interrogation
to start
a cycle base
on to
thestart a cycle base on the
956D
RS422
start/stop
pulse BLOKone
uses
a recommended
one
microsecondinput
minimum
interrogation
input
Insert
length
to 0.1uses
inch.
Enter
InsertRS422
stroke length
to The
0.1stroke
inch.
Enter
Range
Range
interrogation
input.number.
It as
generates
(2)
one
microsecond
return
pulses
with the time
differential
between
the differential
leading edge
of those
input.
It generates
(2) one
microsecond
return
pulses
with
the time
between
thepulses
leading edge of those pulses
ainterrogation
four-place
number.
Example:
as a four-place
Example:
proportional
to theenters
distance
traveled.
unit
can betraveled.
orderedThe
in span
lengths
from
to
36 inlengths
0.1 increments
available
with male
proportional
toThe
distance
unit can
be ordered
in span
from 5 toand
36are
in 0.1
increments
and are available with male
A 12.0
stroke
asthe
0120.
To
A 12.0 stroke
as
0120.
Toenters
F1 510KHz
10KHz
F1
convert
aonmetric
stroke
convert
a metric
stroke
millimeters,
or female
1/4
- 28 threads
the 1/4
piston.
orinfemale
- in28millimeters,
threads on the piston.F2 25KHz F2 25KHz
multiply millimeter multiply
value bymillimeter
0.03937 value by 0.03937
956D-RS
0120F3 50KHz X
0120
X
to arrive at inch value.
to arrive at inch value.
50KHz
F3 956D-RS
Stroke LengthStroke Length
75KHz
F4 Length
F4 75KHz Stroke
Stroke Length
Options
Options
List Price
100KHz
F50.1 inch.
100KHz
F5
Insert
to 0.1 inch.Insert
Enterstroke
as
a fourlength to
Enter as a fourAdd
ConnectorList
Style
List Price
Connector Style
Pricestroke length
place number. Example:
place
stroke
number.
entersExample:
as F6 A 12.0
stroke enters as
150KHz
Add A 12.0
150KHz
F6
Add
X
No
Options
Male
Piston
X
1/4
No
28
Options
$0
- Male Piston 1/4 - 28
0120. To convert a metric stroke
0120.
in millimeters,
To convert a metric stroke in millimeters,
Threads. Options
E 12mmEuro 12 Pin,
$0
E
Euro 12 Pin,
$0 12mm
F7 by 250KHz
250KHz
F7 tomillimeter
multiply millimeter
value by 0.03937
multiply
arrive at value
0.03937 to Threads.
arrive at
Connector.
Connector.
inch value.
inch value.
E
Wet Environment. Electronics
E
Wet Environment.
$55
Electronics
F8 500KHz F8 500KHz
X
NoIPOptions
- Male Piston
sealed to IP 68 Rating.
sealed
to
68 Rating.
Consult
othersfor others.
Consult
factory
Consult factory
forfactory
others.for
1/4 - 28 Threads.
F9 1.00MHz F9 1.00MHz
F
Front Metal Rod End, F
FemaleFront
- usedMetal
$23Rod End, Female - used
956D-CP, VP and RS LDT
956D-CP,
List Prices
VP and RS LDT List Prices
with option X.
with option X.
A1 1KHz
1KHz
A1
E
Wet Environment.
Active Stroke in InchesActive Stroke
List Price
in Inches
List Price
R
Rear Metal Rod End, Female
R
Rear
- Metal
$33
Rod End,
Female
Electronics
sealed
to IPA2 2KHz
5.0 - 12.0
5.0 -$762
12.0
$762 A2 2KHz
used with option X (connector
used with
68option
Rating.X (connector
5KHz
A3
5KHz
A3
end).
end).
12.1 - 18.0
12.1$791
- 18.0
$791
Output Resolution
Output
Resolution
F
Front
RodRod
End,
A
Tapped Female PistonARod 1/4
Tapped
Female
$0 Metal
Piston
1/4
18.1 - 24.0
- 24.0maximum
$819
Cycles per inch, maximum
Cycles 18.1
per $819
inch,
-28 . Mode
-28 . Female - used with
Output Mode Output
internal24.1
resolution
is 0.001resolution
inches is 0.001
24.1 - 30.0
$849
- 30.0 internal
$849inches
option X.
1000 standard
1000 standard (Available
range is(Available range is
S
Stainless Steel Front Rod
S EndStainless
used $37
Steel Front Rod End used
X1update
quadrature, 1ms update
X1 1ms
30.1 - 36.0
30.1$878
- 36.0 0001 through 9999) $878
X1 X1 quadrature,
0001 through 9999)
with option A.
with
R option
RearA.
Metal Rod End,
Dual magnet,
Dual magnet, difference
Longer lengths available for vertical
Longerapplications.
lengths available for vertical applications.
Stainlessdifference
Steel Rear Rod
T EndStainless
used Female
$37
Steel Rear
- usedRod
withEnd used
D1 T
D1
between
magnets.
between
magnets.
Consult factory.
Consult factory.
with option A (connector end).
with option
A X.
(connector end).
option
Input
Input
Quadrature Output
A+, A-, B+, B-, Z+,
Z -Line Drivers:
5V or Input Power
Stroke
Lengths
43
List Price
Add
A
Zero Offset Storage
Zero Offset Storage
Sinking
For accessories,Sinking
see
Forpage
accessories,
46.
see page 46.
44
E with(Typically
(Typically used
sourcingused with sourcing
output type.)
output type.)
Sourcing
Sourcing
C with(Typically
(Typically used
sinking used with sinking
output type.)
output type.)
TTL Level T
44
TTL Level
5.0 - 12.0
5.0 - 12.0
$797
$797
12.1 - 18.0
$825
18.1 - 24.0
$855
30.1 - 36.0
$913
List Price
$23
$33
$0
$37
$37
Differential RS422Differential
line driver, RS422
TTL line driver, TTL
D
compatible
compatible
Differential
driver
Differential line driver
10 to 30line
VDC,
V 10 to 30 VDC, V
L
out = -V1inVolt
(LDT Power) - 1 Volt
out = V in (LDT Power)
Options
Options
List Price
Add
X - Male No
Options
Piston 1/4 - 28 Threads.
No Options
Piston
1/4 - Male
28 Threads.
$0
List Price
Add
$0
E
Wet
Environment.
sealed to $55
IP 68 Rating.
$55
E
Wet Environment.
Electronics
sealedElectronics
to IP 68 Rating.
- 30.0 $884 MI 48017
$884 800.635.0289 248.435.0700
24.1 - 30.0
1080 N. Crooks
Road 24.1
Clawson,
Fax
248.435.8120
www.ametekapt.com
Longerfor
lengths
available
for vertical applications.
Longer lengths available
vertical
applications.
$55
956DQ
LDT List Prices
956DQ LDT List
Prices
StrokeList
in Price
Active Stroke Active
in
Inches
Inches
List Price
Add
$0
Front Rod
Effective 1/01/2015 (All Prices
Effective
areStainless
List
1/01/2015
U.S.Steel
Dollars)
(All
Prices are List U.S. Dollars)
Non-volatile (Retentive,
Non-volatile (Retentive,
100,000 storage cycles
N cycles
100,000 storage
T
maximum).
maximum).
For accessories,
see page 46.
For accessories,
see page 46.
956
Stroke Length
Stroke
Interrogation
Effective 1/01/2015
(AllLength
Prices
are List U.S. Mode
Dollars) Interrogation Mode
Options
Options
List Price
Add
Insert stroke length to 0.1 inch.Insert
Enterstroke
as a length to 0.1I inch.Internal
Enter asInterrogation
a
Internal Interrogation
I
four-place number. Example: Afour-place
12.0 stroke
number. Example: A 12.0 stroke
X
No Options - Male Piston
X 1/4No
- 28Options
$0 - Male Piston 1/4 - 28
External
Interrogation E
External Interrogation
E a metric
enters as 0120. To convert a metric
entersstroke
as 0120. To convert
stroke
Threads.
Threads.
in millimeters, multiply millimeter
in millimeters,
value by multiply millimeter value by
E
Wet Environment. Electronics
E
Wet Environment.
$55
Electronics
0.03937 to arrive at inch value.0.03937 to arrive at inch value.
Number of
Number
sealed toofIP 68 Rating.
sealed to IP 68 Rating.
Recirculations
Recirculations
F
Front
Metal
Rod
End,
F
Female
Front
Metal
$23
Rod
End,
Female
used with
option X.
used with option X.
001 (Standard) to 127
001 (Standard)
to 127
956
Type
56
Stroke Length
RS
Digital Version -
0120
956
5 to 36"
956
Output
Control Pulse
0120
Stroke
Lengths
Outputs
956D-CP
956
Outputs
956D-CP
F Rod End,
Front
Metal -Rod
End,
used with
option X.
Front Metal
Female
used
withFemale
option -X.
$23
$23
RRod End,
Rear
Metal Rod
End,
Female
used with
Rear Metal
Female
- used
with
option -X.
$33option X.
$33
FACTORY AUTOMATION
956
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
57
FACTORY AUTOMATION
957
58
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
957A/D/SSI Brik
Specifications
957SSI
Connector
Interface
957D
Connector
Interface
957A
Connector
Interface
Sensor Housing
Shock
957SSI Output
Vibration
30 Gs (lab tested)
IEC 60068-2-6
957D Output
Measuring
Length
300 750 1000 2000 5000mm
Measurements/ 3.7k 3.0k 2.3k 1.2k
0.5k
sec.
Controller Dependant
957A Output
Voltage
Current
Displacement
1" to 180"
Dead Band
Approvals
CE (EMC)
Null Zone
Input Voltage
7 to 30 VDC
Hysteresis
0.008
Enclosure Rating
Current Draw
Non-linearity
957SSI
Resolution
Storage Temperature
-40 to 221 F
(-40 to 105 C)
957D Repeatability
957A Repeatability
957SSI Repeatability
Operating
Temperature
957SSI Measured
Variables
Diagnostics
957D
Resolution
957A
Resolution
Internal
Output
Controller Dependant
0.00006
16-Bit
0120
Brik
Extrusion
Output Type
S
SSI
VP
X
957
957
Units of Measure
Data Length
Options
Inches
24 Bits
None
Metric
25 Bits
26 Bits
Stroke Length
1" to 180". Insert stroke length to 0.1 inch. Enter as
a four-place number. Example: A 12.0" stroke enters
as 0120.
OR
Insert stroke in millimeters to 5mm. Enter as a fourplace number. Example: 305mm stroke entered as
0305M.
Connector Option
S
C_
H_
Data Format
Resolution
Binary
.005mm
Gray
.01mm
.05mm
Position Update
.1mm
Synchronous
.02mm
Asynchronous
.002mm
.001mm
Direction
.00005"
.0001"
.0005"
Velocity
.001"
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
59
FACTORY AUTOMATION
957A
0120
V0
Output
0 to 10 VDC
V1
V2
V3
10 to -10 VDC
V4
V5
V6
-5 to 5 VDC
V7
5 to -5 VDC
X
Options
None
Connector Option
10 to 0 VDC
-10 to 10 VDC
C_
0 to 5 VDC
5 to 0 VDC
H_
C4
4 to 20mA
C2
20 to 4mA
Units of Measure
Inches
E
Metric
Stroke Length
Insert stroke length from 1" - 180" to 0.1 inch. Enter as a
four-place number. Example: A 12.0" stroke enters as 0120.
OR
Insert stroke in millimeters to 5mm. Enter as a four-place
number. Example: 305mm stroke entered as 0305M.
CP
0120
Output
Control Pulse
S
Connector Option
S
C_
Stroke Length
H_
RS
TP
957
RS
Options
None
Metric
VP
VP
0120
Output
Variable Pulse
M
B
Stroke Length
Insert stroke length to 0.1 inch. Enter as a
four-place number. Example: A 12.0" stroke
enters as 0120.
OR
Insert stroke in millimeters to 1mm. Enter as
a four-place number. Example: 305mm stroke
entered as 0305M.
Units of Measure
Inches
E
M
60
S
Connector Option
Standard 6 Pin, 12mm Euro
Integral Cable Assembly. Insert length in
feet. Example: C6 = 6 foot cable.
6 Pin DIN, MTS Style D60
Metric
C_
001
Number of
Recirculations
001
(Standard)
001
to 255
Options
None
Interrogation Mode
Internal Interrogation
External Interrogation
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
957
957 Dimensions
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
61
FACTORY AUTOMATION
957 Accessories
957A Cable Accessories
Description
SD0521800
Slide Magnet
SD0521801
SD0551500
SD0522000
Mounting Foot
Use With
Connector
949029L6
949029L12
949030L6
949030L12
SD0554500LXX
SD0558500LXX
SD0554600LXX
8 Pin DIN
Part Number
Description
Use With
Connector
949011L6
949011L12
949012L6
949012L12
Part Number
SD0553200LXX
6 Pin DIN
SD0553300LXX
SD0553400LXX
957
62
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
Features
The Network LDT is available in two different package styles; the 953N is our Rod Style package that is
suitable for installation into hydraulic cylinders and our
957N Brik Low Profile Style package that incorporates
the same electronics but is housed in an aluminum style
extrusion.
ReadyLink
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
63
FACTORY AUTOMATION
M12-A Coded
EtherNet (2 Connectors)
M12-D Coded
Displacement
Rod Style
1" to 300" 316 stainless steel guide tube with thick wall aluminum cover
Profile Style
Dead Band
Null
2.00"
Non-linearity
Hysteresis
Repeatability
( 0.003" typical)
Operating Temperature
Head (Electronics)
Guide Tube
Storage Temperature
Electrical Specifications
Input Voltage
7 to 30 VDC
Power Consumption
2.3W maximum (at 30 VDC), 2.1W typical at 1ms interrogation time and 24V input voltage
Current Draw
Data Format
Measured Variables
centimeter, millimeter, micron, inch, 0.01 inch, 0.001 inch, 0.0001 inch (User Configurable)
Interface Specifications
Interface Type
EtherNet/IP
ReadyLink
Other Specifications
Enclosure Rating
Shock
Vibration
Approvals
64
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
953N
IP
Model
953N
Rod Style
957N
Profile Style
IP
0120
Output
EtherNet/IP
Connector Option
Standard-2S
M12D & 1-M12A
Stroke Length
Insert stroke length to 0.1 inch. Enter as a
four-place number. Example: A 12.0" stroke
enters as 0120.
OR
Insert stroke in millimeters to 1mm. Enter as
a four-place number. Example: 305mm stroke
entered as 0305M.
Options
None
X
Seal Options
X
Standard (Buna N)
Fluoroelastomer
Mounting Threads
Blank for 957 Profile style
Units of Measure
Inches
E
M
Metric
ReadyLink
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
65
FACTORY AUTOMATION
Rod Style
The 953N Rod style transducer is available in stroke
lengths form 1 to 300. The transducer is available in
English (Imperial) or metric stroke lengths as well as English x 16 or metric M18 x 1.5 mounting threads.
REVISIONS
ZONE
2.50
63.50
2.00
50.80
NULL
4.97
126.28
REV.
DESCRIPTION
DATE
APPROVED
RELEASED
5/12/2014
GSL
2.50
DEAD BAND
STROKE
1.25 [31.75]
HEX
SEE BELOW
.405
10.29
TUBE
3.00
76.20
1.28 DIA.
MAGNET SHOWN
.31
7.87
TYPICAL
GROUND LUG:
1/4" TERMINAL
2.22
[56.44]
REF.
1.01
25.69
VITON O-RING
1.01
[25.69]
VITON O-RING
FLAT FACE
4
1
.91
23.15
.10
2.54
FLAT FACE
.91
VITON
O-RING
[23.15]
.10
[2.54]
ReadyLink
VITON O-RING
INPUT VOLTAGE
PIN NUMBER
WIRE COLOR
SUPPLY VOLTAGE
PIN NUMBER
WIRE COLOR
1
2
BROWN
WHITE
+24 VDC
NO CONNECTION
WHITE/ORANGE
Tx+
WHITE/GREEN
Rx+
BLUE
ORANGE
Tx-
BLACK
NO CONNECTION
GREEN
RAISED FACE
FUNCTION
Rx-
RAISED FACE
SHEET 1 OF 2
THIRD ANGLE PROJECTION
SURFACE FINISH
63
66
COPYRIGHT c 2014
AMETEK AUTOMATION & PROCESS
TECHNOLOGIES. ALL RIGHTS RESERVED. DRAWING IS
PROPERTY OF AMETEK AUTOMATION & PROCESS
TECHNOLOGIES. UNAUTHORIZED USE, DUPLICATION OR
DISTRIBUTION IS STRICTLY PROHIBITED BY FEDERAL LAW.
DR.
J.S.B.
TITLE
DIMENSION DRAWING
B.D.B. NETWORK LDT
ROD STYLE
DATE 02/14/14
DATE 02/14/14
APP.
SCALE
FULL
DRAWING NO.
PD0124400
REV. SIZE
A D
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
Profile Style
The 957N Profile style transducer is available in stroke
lengths form 1 to 180. The transducer can be mounted
vertically or horizontally using the SD0522000 mounting
foot. The mounting feet slide in the grooves on the lower
part of the extrusion and clamp down when tightened.
Magnets and mounting feet are always ordered as separate line items, choices of magnets are our slide magnets
.22
5.59
(2) PER
MTG. .22
FOOT
5.59
(2) PER
MTG. FOOT
4.24
107.70
4.24
107.70
.60
15.24
R.87
22.01
360 ROTATION
R.87
22.01
360 ROTATION
ZONE
.60
15.24
.30
7.62
.36
9.02
.30
7.62
.36
9.02
3.00
76.20
3.00
76.20
GROUND LUG:
1/4" TERMINAL
GROUND LUG:
1/4" TERMINAL
TOP MOUNT
STYLE
TOP MOUNT
STYLE
1.50
38.10
.56
14.22
.56
14.22
2.50
63.50
1.50
38.10
.20
5
.07
.20
1.88
5
.07
1.88
2.50
63.50
2.00
50.80
NULL
2.00
50.80
NULL
DESCRIPTION
RELEASED
DATE
APPROVED
5/12/2014
GSL
REVISIONS
ZONE
.30
7.62
REV.
DESCRIPTION
DATE
APPROVED
RELEASED
5/12/2014
GSL
.30
7.62
1.37
34.80
1.97
50.04
2.68
68.07
1.37
34.80
1.97
50.04
2.68
68.07
.99
25.02
.99
25.02
1.22
[31.00]
1.22
[31.00]
MAGNET SENSOR
LOCATION
MAGNET SENSOR
LOCATION
SENSING STROKE LENGTH:
1 INCH TO 180 INCHES
MAGNET SENSOR
25MM TO 4572MM
LOCATION
SENSING STROKE LENGTH:
L = NULL
STROKE
+ DEAD ZONE
1 INCH+ TO
180 INCHES
25MM TO 4572MM
REV.
2.65
67.31
DEAD ZONE
2.65
67.31
DEAD ZONE
2.06
52.32
1.45
36.83
.81
20.46
1.45
36.83
.81
20.46
.92
23.37
1.20
30.48
.92
23.37
1.20
30.48
.40
10.16
2.06
52.32
.40
10.16
3
2
MAGNET
SENSOR
4
1
SENSING
SURFACE
1/4 INCH
MAGNET
6.35 SENSOR
MAX.
1/4 INCH
6.35
MAX.
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
SENSING
SURFACE
FLOATING MAGNET
ISOMETRIC VIEW
FLOATING MAGNET
ISOMETRIC VIEW
ReadyLink
SHEET 1 OF 2
THIRD ANGLE PROJECTION
SURFACE FINISH
COPYRIGHT c 2014
AMETEK AUTOMATION & PROCESS
TECHNOLOGIES. ALL RIGHTS RESERVED. DRAWING IS
PROPERTY OF AMETEK AUTOMATION & PROCESS
TECHNOLOGIES. UNAUTHORIZED USE, DUPLICATION OR
DISTRIBUTION IS STRICTLY PROHIBITED BY FEDERAL LAW.
TOLERANCE ALLOWANCE
UNLESS OTHERWISE SPECIFIED:
DR.
J.S.B.
DATE 02/14/14
APP.
B.D.B
63
DATE 02/14/14
DR.
SCALE
J.S.B.
FULL
DATE 02/14/14
APP.
B.D.B
DATE 02/14/14
SCALE
FULL
TITLE
DIMENSION DRAWING
NETWORK LDT
SHEET
1 OF 2
BRIK STYLE
TITLE
DRAWING NO.
REV. SIZE
DRAWING NO.
REV. SIZE
DIMENSION
PD0124500DRAWING
A D
NETWORK LDT
BRIK STYLE
PD0124500
A D
67
FACTORY AUTOMATION
Description
Part Number
Communications Cable M12-D Straight to M12-D Straight CAT 5e, Shielded Cable - Available in
1 & 5 Meter lengths
949038L1M = 1 meter
949038L5M = 5 meter
Communications Cable M12-D Straight to M12-D Right Angle CAT 5e, Shielded Cable - Available
in 1 & 5 Meter lengths
949039L1M = 1 meter
949039L5M = 5 meter
Communications Cable M12-D Right Angle to M12-D Right Angle CAT 5e, Shielded Cable Available in 1 & 5 Meter lengths
949040L1M = 1 meter
949040L5M = 5 meter
Communications Cable M12-D Straight to RJ45 CAT 5E, Shielded Cable- 5 Meter
949041L5M
Communications Cable M12-D Right Angle to RJ45 CAT 5e Shielded Cable - 5 Meter
949042L5M
Connector End Cap Unused connectors should be covered by this End Cap
RJ45 Connector
04521619
ReadyLink
Straight Connector
Description
Part Number
949043L5M = 5 meter
949043L10M = 10 meter
949043L15M = 15 meter
949044L5M = 5 meter
949044L10M = 10 meter
949044L15M = 15 meter
68
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
Specifications
Enclosure Type
Output
Signal/Protocol*
Data
Range Temp.
Pressure Rating,
Wetted Parts
Wetted Parts
Accuracy
0.01% of Span
Null Zone
Dead Band
FM
APPROVED
US
316LSS
Probe Length
Power Supply
Approvals
10 to 30 VDC
40mA @ 30 VDC max.
26mA @ 24 VDC Typical
9.25
2.75
Specifications are subject to change without notice. Patented.
*7235 also available with TTL, proprietary output signal.
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
7230
69
FACTORY AUTOMATION
LLL
Protocol
1 = Modbus
5 = Proprietary ASCII
Fx
# of Temp Points
R1 = 1 Sensor
R5 = 5 Sensors
T1 = 1 Sensor
Connector Style
D = 3/4 NPT Dual
S = 3/4 NPT Single
7230 Series
HT Digital Probe
Rx
Fittings
E = English
M = Metric**
XXX
EX
Special Mounting
EX = FM/CSA
Overall
Length*
Mounting Style
H = Condulet
# of Floats
F1 = 1 Float
F2 = 2 Floats
Span*
Style/Material
X = 316 Stainless Steel
Dimension Drawing
7235 Wiring
70
7231 Wiring
SD0557200
SD0556800
Float Kit: Level Float, Nitrophyl 2.0 d x 3.0 h 0.40sg, E-clip & spacer
SD0548600
Float Kit: Interface Float (w/Nitro. level float), 316SS, 2.05 dia.,
0.96sg, E-clip & spacer
SD0557300
04283800
04587241
04534047
DATA
COM
P/N
PWR
7230
Item
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
7330 Pro-Stik II
Intrinsically Safe
Programmable Linear Position Sensor
7330X
Shown with
optional tube
coupling, bushing
and float kit.
7330F
Shown with
optional float kit.
7330X
Shown with
optional tube
coupling and large
split magnet.
Specifications
Operating Voltage
13.5 to 30 VDC
0 to 1000 @ 24 volts
Output
4 to 20mA
Operating Temperature
-20 to 70 C
Pressure Rating
Resolution
Repeatablity
Accuracy
Enclosure:
Material
Rating
Probe Length
Stainless Steel
20 to 288
Null Zone
Dead Band
Approvals
FM
APPROVED
US
7330
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
71
FACTORY AUTOMATION
7330 Pro-Stik II
Part Numbering
733
7330
Pro-Stik II
Output
0 = 4 to 20mA
1 = 20 to 4mA
Style/Material
X = 316 Stainless Steel
LLL
Fittings
E = English
M = Metric
Connector Style
M = 4 Pin Mini
R = 1/2 NPT Right Angle
D = 3/4 NPT Dual
S = 3/4 NPT Single
F1
XX
# of Floats
F1 = 1 Float
Special Mounting
XX = None
Overall Length*
ie. 072 = 72
Min 18 Max 288
Span*
ie. 072 = 72 (Min 8 Max
278. Max span is equal to
overall length -10)
XXX
Mounting Style
X = None
Dimension Drawing
MM
Connector
STYLE
OVERALL LENGTH (O.A.L.)
7/8-16 UNS-2A
1.00
.625
2.00"
DEAD
BAND
SPAN
7330
Accessories
72
Wiring Diagram
Item
Part Number
Float Kit, 316 SS, 2.05 Diameter w/ E Clip and Spacer 0.54s.g.
SD0515000
SD0536500
01533141
04283800
Junction Box, side mount, N4X with zero & span push buttons
SD0536101
04517238
04517248
04541069
04587241
Program Input
(White wire)
Chassis
(Shield for Cable),
(Green wire for cordset)
Loop In +
(Red wire)
Connector View
Contact Factory for additional drawings.
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
7330EX/ED Pro-Stik II
Explosion/Flame Proof Design Integrated with
Magnetostrictive Technology
The 7330 EX/ED Series Pro-Stik II takes field proven
magnetostrictive sensing technology and incorporates
features such as explosion/flame proof design and
field programmable span. This is packaged in our
patented Stik design, making the Pro-Stik II ideal
for level monitoring in a variety of liquids and tanks.
Sensors are available in rigid 316 stainless steel up to
24 feet.
The 7330 EX/ED Series Pro-Stik II is a loop powered
explosion/flame proof sensor with a scalable 4 to
20mA span that provides 0.1% accuracy, full scale.
Calibration is not required, although the upper and
lower limits of the Span can be programmed in the
field.
The sensors electronics are SMT components
in a 5/8 diameter sensing tube. This packaging
breakthrough improves the environmental seal to the
electronics.
Specifications
Operating Voltage
13.5 to 30 VDC
Output
Operating Output
4 to 20mA
Repeatability
Output
3.9mA
20.1mA
3.8mA
Operating Temperature
Null Zone
Dead Band
Enclosure Material
Rating
Probe: 316 SS
IP68
Pressure Rating
Resolution
Accuracy
Probe Length
Stainless Steel D, S
FM
APPROVED
18 to 288
* Consult Factory
Approvals
US
7330
Diagnostic Output
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
73
FACTORY AUTOMATION
7330EX/ED Pro-Stik II
Part Numbering
733
7330
Pro-Stik II
XXX
F1
Span*
Connector Style
D = 3/4 NPT Dual
S = 3/4 NPT Single
XXX
XX
Mounting Style
H = Condulet
# of Floats
F1 = 1 Float
Output
0 = 4 to 20mA
1 = 20 to 4mA
Fittings
E = English
M = Metric**
Style/Material
X = 316 Stainless Steel
Overall Length*
Special Mounting
EX = FM/CSA
Explosion Proof
Dimension Drawing
XS STYLE
XD STYLE
Wiring Diagram
SD0515000
SD0536500
01533141
04283800
04541069
04587241
Part Number
Float Kit, 316 SS, 2.05 Diameter w/ E Clip and Spacer 0.54s.g.
LOOP
LOOP
PRGM
+
Item
ZERO
7330
Accessories
74
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
950IS
952
952QD
SD0400800
SD0480900
M0822400
M0822401
SD0403900
M0750500
SD0411200
SD0411201
SD0410300
SD0410301
Float Kit
Level Float, 316SS, 2.05 dia., 0.54sg
Float, E-clip & spacer
SD0557200
Float Kit
Interface Float, 316SS, 2.05 dia., 0.96sg
Float, E-clip & spacer
Float Kit
Level Float, Nitrophyl, 2.0 d x 3.0 h
0.40sg, E-clip & spacer
Float Kit
Interface Float (w/Nitro. level float),
316SS, 2.05 dia., 0.96sg, E-clip & spacer
Adjustable Tube Coupling
316SS, 5/8 x 3/4 NPT
Reducing Bushing
316SS, 2 x 3/4 NPT
Analog Interface Board Modbus RTU to
analog (4-20mA) converter
Float Kit
Level Float, 316SS, 2.05 dia., 0.54sg
Float, E-clip & spacer
Float Kit
Level Float, Nitrophyl, 2.0 dia., 0.40sg,
Float & E-clip
Stainless Steel Float
Miniature, .62 SG
SD0556800
SD0548600
SD0557300
04283800
04587241
04534047
SD0515000
SD0548600
04-535090
04-535091
SD0565000
953
7230
7330
950MD
953N
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
Misc.
Description
75
FACTORY AUTOMATION
Rod Magnets
Standard 4 Hole Magnet
.53
45
N
S
.331 TYP.
N
N
.662 TYP.
S
N
.187
4 PLACES
.31
1.29
.530
1.290
.250
MATERIAL: ALUMINUM
Standard
P/N: M0822400
P/N: M0822400
Teflon Cylinder Bushing P/N: M0822401
Non-Ferrous Spacer for Split Magnet
.25
.31
.812
.406
.812
S
.53
.234
N
.187
(2) PLACES
.234
N
.56
SLOT
Misc.
MATL.: ALUMINUM
P/N: SD0403900
76
1.290
MATL.: ALUMINUM
P/N: M0750500
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
Rod Magnets
Cylinder Magnet
.997
.995
DIA.
.38
.312
1.407
.75 THRU
S
.187 THRU
(2 PLACES)
N
N
.406
N
.53
2.50 REF.
NOTE: USE THIS MAGNET WITH ROD
SUPPORT BRACKET SD0411100
stake
ring
magnet
ring
magnet
.125
1.295
2.000
2.000
spherical
1.545 o.d.
1.610 max. dia.
over weld bead
P/N: 04535090
O.D.
P/N: 04535091
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
Misc.
1.245
77
FACTORY AUTOMATION
Misc.
78
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
Battery Operated
Test/Programming Unit
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
Misc.
79
FACTORY AUTOMATION
Cable Assemblies
Description and
Part Number
950IS
950MD
951
952
952QD
953D/
957D
953A/
957A
953SSI/
957SSI
955LC
955e
955S
955DQ
955D
955A
1
1
2
3
3
1
1
1
1
7
7
8
Misc.
OBS
4
80
4 5 5 5
4
5
5
5
5
6
7330
1
1
7230
956
7330 Cable
P/N 01533141
7
8
Option M Connector.
Option B Connector.
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
Cable Accessories
10 Pin Straight Cable
(951, 952, & 953 Connector Option E)
1.013
MAX.
1.69
1.000
MAX.
.37
1.760
.58
1.965
.450
.812
(950IS)
2.25
.55
Misc.
1.00
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
81
FACTORY AUTOMATION
Connector Options
952 Blue Ox Connector Options
Option T
Threaded Metal Connector
(MTS - RB on Tempo II & III)
S Connector Style
5 Pin Micro, 12mm Euro
Option M
1/4 Turn Quick Disconnect Connector
(MTS - MS on Tempo II & III)
M Connector Style
6 Pin DIN, Fits MTS D60
7 Pin DIN, Fits MTS D70 (for SSI only)
B Connector Style
8 Pin DIN, Fits Balluff S32
C Connector Style
Integral Cable Assembly
Misc.
M Connector Style
10 Pin MS, Wired to Replace 951 and 952 LDTs
82
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
Typical Installation
2.00
.28
2 PLACES
1.25
.37
NOTES: UNLESS OTHERWISE SPECIFIED
1.00
C
L
.44
STROKE
NULL
1.00
DEAD
BAND
1.03
OPTIONAL
MAGNET
2.00
PROBE
2.00
1.75 HEX
MAGNET MOUNTING
KIT (P/N 949005)
1.00
.62
.28
2 PLACES
2.00
1.25
2.00
1.00
.50
.88
1.91 2.00
.50
NOTE:
NOTE: WHEN
WHEN USING
USING ROD
ROD SUPPORTS
SUPPORTS USE
USE MAGNET
MAGNET P/N
P/N SD0411100
SD0411200
.766 THRU
2.00
.56 THRU
2.00
2.00
.937
.469
1.00
1.00
.37
.28 THRU
2 PLACES
2.00 REF.
.37
.25 REF.
.19 MIN.
1.25
90 1/4
1.00
.28 THRU
2 PLACES
2.00 REF.
.62
3.00 REF.
1.25
90 1/4
1.00
.62
3.00 REF.
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
Misc.
.25 REF.
.19 MIN.
83
FACTORY AUTOMATION
Typical Installation
In Cylinder Mounting
STANDARD 4-HOLE MAGNET
0.5" BORE MINIMUM
CABLE NUT
O-RING SEAL
MAGNET SPACER
OPTIONAL ROD BUSHING
P/N: M0822401
Misc.
84
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
FACTORY AUTOMATION
Direct Connectivity
Application
Gemco Transducer
Comments
2120
2110
1996C
951CP versions,
952CP versions,
953CP versions
1995L
(Consult Factory
for 4-20 Input )
Programmable Limit
Switch
Battery Operated
Test/Programming Unit
SD0528810
952A, 953A
955A, 955e, 955S,
956A, 956S & 957A
Battery Operated
Test/Programming Unit
SD0528811
952A, 953A
955A, 955e, 955S,
956A, 956S & 957A
Misc.
Series
1080 N. Crooks Road Clawson, MI 48017 800.635.0289 248.435.0700 Fax 248.435.8120 www.ametekapt.com
85
Other Solutions
Cable & Hose Carriers
1025 Footswitch
Heavy duty treadle operated foot
switch
NEMA 1 & 4
Optional protective cover
Single or dual circuit
Optional locking latch kit
Optional pneumatic valve installed
in place of electrical switches
MADE IN AMERICA
Copyright 2015 by AMETEK Inc. All Rights Reserved. Made in the USA.
GTTB B12R
5/16 Z144