Академический Документы
Профессиональный Документы
Культура Документы
Autor:
Fecha de creacin:
Versin:
IndexPro Consulting
Diciembre - 2015
1.0
Pgina 1 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Q5
You run the default startmanageWeblogic (.cmd in Windows) script as shown here:
startmanageWeblogic.sh server1 http://192.168.1.102:8001.
What does this do?
A. It starts the administration server named server1, which is running at 192.168.1.102.8001.
B. It starts the managed server named server1, which is running at 192.168.1.102.8001.
C. It starts the managed server named server1 whose Node Manager is running at 192.168.1.102.8001.
D. It starts the Managed Server named server1 whose Administration Server is running at
192.168.1.102:8001.
Answer: D
Q6
An application requires a JDBC data source, which you create in the domain. You name it but the administrator allot
another domain name the same data source DatasourceB. Without modifying either domain, which is the best method
to ensure that the application deploys successfully in both?
A. Create a separate application archive to use with each domain.
B. Create a separate deployment plan file to use with each domain.
C. Create and register a custom deployment listener.
D. Modify the application code to determine the current domain.
Answer: B
Q7
Identify three options for Keystores in a server's configuration.
A. Demo Identity and Demo Trust
B. Demo Identity and Java Standard Trust
C. Java Standard Identity and Custom Trust
D. Custom Identity and Demo Trust
E. Custom Identity and Custom Trust
F. Custom Identity and Command Line Trust
Answer: A, E, F
Q8
When installing Oracle Weblogic Server 11g with the graphical installer, which three statements are true?
A. You must choose either a typical or a custom installation.
B. You install under Microsoft Windows because the graphical installer is available only for Window
C. You may create a new middleware home directory or choose an existing one.
D. You must register for critical security updates.
E. You may install a JDK or choose one that was previously installed.
Answer: A, C, E
Q9
Each domain has a directory called servers that contains subdirectories for each server in the domain.
Your domain has a managed server named managed1. When will the managed1 directory be created?
A. When the managed1 server is defined in the configuration Wizard
B. When the domain is created
C. When the administration server comes up for the first time
D. When the managed1 server1 comes for the first time
Answer: D
Pgina 3 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Q10
Identify three properties required by the domain Configuration Wizard when creating a new domain.
A. machine name
B. Managed Server name
C. domain startup mode
D. domain name
E. administrator username and password
Answer: C, D, E
Q11
Which two statements are true about adding servers to a cluster?
A. When you create a cluster, you must add at least one server to it.
B. Only managed servers can be in a cluster.
C. The administration server is automatically added to a new cluster.
D. You must explicitly identify which servers belong to the cluster.
Answer: B, D
Q12
Consider a single JMS module that includes a connection factory as well as queue.
Based on your system's requirements, the connection factory needs to be made available to all servers in the domain.
The queue, on the other hand, can be targeted to only a single JMS server domain.
What is the best way to achieve the desired JMS setup?
A. Create two subdeployments within the JMS module.
B. Target the JMS server to the JMS module.
C. Target the JMS module to the entire domain.
D. Replace the queue with a topic.
Answer: A
Q13
Which three attributes are part of the configuration of an existing Managed Server and can be modified through the
administration console?
A. name of the server
B. the cluster it is in
C. the machine it runs on
D. its replication group
E. whether it is in Development Mode or Production Mode
F. that it should become the Administration Server for the domain
Answer: B, C, D
Q14
Which can be associated with multiple domains?
A. Cluster
B. Server Log
C. Node Manager
D. Administration Server
Answer: C
Pgina 4 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Q15
Identify two supported methods of deploying a JMS module to a domain.
A. Create a module by using the administration console.
B. Load a module into the WebLogic database.
C. Include a module file within a web application archive.
D. Include a module file within an enterprise application archive.
E. Define a module within an existing JDBC module.
Answer: A, D
Q16
Which statement is true about the java Node Manager?
A. It runs on Windows not on Linux
B. In its secure form, it uses one-way SSL.
C. It does not use the nodemanager. domains file, whereas the script-based Node Manager.
D. Unlike the script based Node Manager, it should not be run as an operating system service
Answer: B
Q17
Which two statements are true about a WebLogic domain?
A. It is the basic administrative unit of WebLogic Server.
B. It is an optional administrative construct to organize groups of WebLogic
C. Administration Servers are defined within a domain, but Managed Servers
D. You must first have a domain to define a WebLogic Server cluster.
E. Every domain has one Administration Server and at least one managed server
Answer: A, D
Q18
Which two statements are true about multicast communication within a cluster?
A. Multicast can be used for cluster heartbeat messages.
B. Multicast is used to replicate session state between servers.
C. Multiple clusters can share the same multicast address and port.
D. You may disable multicast on individual cluster members.
E. Multicast traffic is often limited to a single subnet.
Answer: A, E
Q19
Identify two true statements about an Oracle WebLogic Server JMS Connection Factory.
A. A default JMS Connection Factory exists and is named weblogic.jms.connections
B. A Connection Factory can be targeted to only one WebLogic Server.
C. A JMS Connection Factory's Default Priority and Default Time-to-Live attribute cannot be modified after the
Connection Factory is created.
D. A JMS Connection factory can be created as a system module resource within the administration console.
Answer: C, D
Q20
In WLST, you enter the shutdown () command with no arguments. Which statement is true in this case?
A. The server you are connected to will shut down.
B. The command does a "Force" shutdown.
C. The command blocks user interaction.
D. The command has timeout of 30,000 milliseconds.
Pgina 5 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Answer: A
Q21
Which three statements are true about WebLogic users and groups?
A. A user is associated with a single security provider.
B. A user can be a member of several groups.
C. A group can contain other groups.
D. A group consists of a name and a password.
E. A group is associated with multiple security providers.
F. Both users and groups are assigned a keystore.
Answer: A, B, C
Q22
Your production JMS server and/or its consumers are not able to handle the incoming message workload.
The number of messages on the server never stabilizes and the server eventually becomes overload.
Which JMS server attribute will best help prevent the JMS server from being overloaded by producers?
A. Producer Pause High
B. Messages Threshold High
C. Reconnect Polity
D. Paging Directory
E. Pool Maximum Capacity
Answer: B
Q23
Which three statements are true about WebLogic clusters?
A. Clusters provide clients with transparent failover.
B. EJB applications can be targeted to an entire cluster.
C. All cluster members must bind to the same port number.
D. Cluster members replicate application data by using heartbeats.
E. Cluster members can be associated with one or more domains.
F. Web applications require a proxy in order to be used in a cluster.
Answer: A, B, F
Q24
Which three statements are true when an Administration Server is compared to a managed server?
A. A domain must have at least one of each type of server.
B. Administration Server keeps a domain log, but a Managed Server does not.
C. A Managed Server keeps a server log, but an Administration Server does not.
D. When a Managed Server comes up, it asks its Administration Server for the latest configuration.
E. An Administration Server manages the domain configuration.
F. JEE applications are deployed only to a Managed Server.
Answer: B, D, E
Q25
Which three tasks can be performed by the Node manager?
A. Start a server.
B. Define a node server.
C. Host the Node Manager console.
D. Automatically restart a failed server.
E. Kill a failed application on a server.
F. Kill the process of a server that did not shut down properly.
Pgina 6 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Answer: A, D, F
Q26
You have successfully created a global data source and connection pool via the administration console.
In which directory relative to the domain will this new data source and connection pool definition located?
A. in a directory named config/dataSource
B. in a directory named config/connPool
C. in a directory named config/resources
D. in a directory named config/jdbc
E. in a directory named config
Answer: D
Q27
What is the maximum number of targets (standard or migrate) that you can configure for a JMS server?
A. 0
B. 1
C. 2
D. No limit
Answer: B
Q28
You are deploying a web application called inventory.war. It has been installed and has the Stat* "Prepared." It is targeted
to the Managed Server named managed1. The web application's context route is /inventory and the starting page is
index.jsp However, you want to test the application before allowing end users access to it. In the administration console,
you select inventory-war, and then select Start and "Servicing only administration requests.
In your web browser, you need to enter a host and port followed by /inventory/index.jsp. What host and port would you
use?
A. managed, host and port
B. Administration Server host and port
C. Managed1 host and Administration port
D. Administration Server host and Administration port
Answer: C
Q29
You deployed a simple web application WAR by using the administration console. Its state is currently "Active."
In the administration console, under Configuration of the application, you change some deployment descriptor values.
What happens when you save such changes?
A. The changes are in memory and temporary
B. This is not possible because changes cannot be made to an "Active" application.
C. You are prompted to select a location for a new deployment plan where the changes will be stored.
D. The archive is opened and new versions of the deployment descriptors are placed within it.
Answer: C
Q30
Your server includes an application that uses a generic JDBC data source to connect to a database.
However, the network connection between the server and the database is not 100% reliable.
You wish to avoid scenarios in which the application fails due to a failed JDBC connection. Identify two data source
attributes to help accomplish this.
A. Statement Cache
B. Pool Reserve Mode
C. Test TableName
D. Test Connection Mode
Pgina 7 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Pgina 8 de 27
Middleware Consulting Services | Project Management Services | Training Services.
C. You need not do anything- The password in boot .properties was automatically updated by administration console
when you changed the password.
D. Edit boot.properties. Type over the encrypted password with the new password in clear text. The next time myserver1
is started, it will encrypt the password in the file.
E. Delete boot .properties. Use the WLST encrypt () command to create a new boot.properties file containing the new
password. Copy that file into the security directory of myserver1
Answer: D
Q36
Pgina 10 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Q43
All the servers in your domain are running.
After you connect to the Administration Server in WLST you run the following command, which completes with no error:
Progress = deploy (appName = `salesapp', path = `sales.war', target = managed1, managed2', planpath = `plan.xml')
Which two statements are true?
A. The web application is now "Active."
B. The command creates new deployment plan called plan.xml.
C. In the administration console, the name of this deployment is sales.war.
D. The web application has been targeted to managed1, managed2, and the Administration Server.
E. You can view the status of the deployment by sending a message to the object named progress.
Answer: A, E
Q44
Your task is to create and start a managed server on a "remote" computer (a computer other than the one where the
domain has been created and the Administration server is currently running).
So far you have:
1. Created the managed server, called startmanaged1, in the administration console
2. Created a managed server" JAR file template by using the pack command or, the Administration server computer.
Which order of steps on the remote computer will successfully finish your task?
A. 3. Copy the JAR file from the Administration Server computer.
4. Run the unpack command on the JAR file.
5. In the new domain folder created by the command, start managed: by using the startManagedWebLogic.sh script (.
cmd in Windows), which is found under its bin directory
B. 3. Install WebLogic Server.
4. Copy the JAR file from the Administration Server computer.
5. Run the unpack command on the JAR file.
6. In the administration console, under the Control tab, select managed1and click the Start button.
C. 3. Install WebLogic Server.
4. Copy the JAR file from the Administration Server computer.
5. Run the unpack command on the JAR file.
6. In the new domain folder created by the command, start managed1 by using the Logic.sh script (.cmd in Windows),
which is found under its bin directory.
D. 3. Install WebLogic Server.
4. Copy the JAR file from the Administration Server computer.
5. Run the unpack command on the JAR file.
6. In the new domain folder created by the command, startmanaged1 by using the startManagedWeblogic.sh script (.
cmd in Windows), which is found under its bin directory.
Answer: D
Q45
Identify three attributes of a WebLogic cluster.
A. Listen Address
B. Cluster Address
C. Cluster Factory
D. Messaging Mode
E. Servers
F. Targets
Answer: B, D, E
Q46
A client accesses a web application named company store that is running on WebLogic Server. After adding several
items to the shopping cart, the host server crashes. The client is automatically redirected to another server by a proxy,
but the shopping cart is now empty.
Pgina 11 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Which WebLogic Server feature would you enable to remedy this situation?
A. Application Persistence
B. Message Persistence
C. Session Replication
D. Dynamic Failover
E. Stateful Pooling
Answer: C
Q47
Which three statements are true about the Change Center in administration console?
A. The Change Center has a link to view the changes made so far.
B. The Change Center is available only in a Production Mode domain.
C. The Change Center has a link to view any servers that need to be restarted.
D. After activating the changes to a server's configuration, you must always restart that server.
E. In a Development Mode domain, the configuration lock can be acquired automatically.
F. Changes must always be activated before they can be undone.
Answer: A, C, E
Q48
Identify two methods for utilizing WebLogic Server's production redeployment feature.
A. Specify a version identifier when deploying the application.
B. Include a version identifier in the application's manifest file.
C. Provide a version identifier when running the Plan Generator tool.
D. Include a unique context root in the application's descriptor files.
Answer: A, B
Q49
Identify four attributes of a JDBC data source.
A. URL
B. Targets
C. JNDI Name
D. Delivery Mode
E. Database Driver
F. Server Log
Answer: A, B, C, E
Q50
Identify two reasons for defining machines and assigning servers to them in Weblogic Server.
A. A machine can be the proxy to a cluster.
B. A machine definition is required to configure the Node Manager.
C. To reference an instance of WebLogic Server, you must know its machine and port.
D. Machine is a required organizational unit. A domain contains machines and machines contain servers.
E. WebLogic Server uses server machine assignments to help it choose servers in a cluster on which to replicate session
state.
F. The machine's Cluster Weight attribute may be used by load balancers to help them determine how often to send
requests to servers assigned to that machine.
Answer: B, E
Q51
The computer that the Administration Server was running on has crashed and cannot be restarted. Which three steps
are required to bring up the Administration Server on the backup computer?
Pgina 12 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Pgina 13 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Q56
You run the following WLST script and it completes successfully. Which statement best describes what the script
created?
A. A CMO named myserver with the listen address 192.168.1.102 and port 8008
B. A Managed Server named myserver with the listen address 192.168.1.102 and port 7001
C. A Managed Server named myserver with listen address 192.168.1.102 and port 8008
D. An Administration Server named myserver with the listen address 092.168.1.102 and port 8008
Answer: C
Pgina 14 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Q58
You are logged in to the administration console for a domain that is running in Development Mode. The domain
configuration, you select Production Mode, Save, and then Activate Changes. Which two statements are true?
A. All running servers must be restarted.
B. Only the Administration Server must be restarted.
C. Auto-deployment will no longer be available for this domain.
D. This change may be made only through the Administration Server's secure port.
E. If you decide to go back to Development Mode, uncheck Production Mode in the administrate console.
Answer: A, C
Q59
Identify three ways to create a domain template.
A. Administration console
B. Domain Template Builder
C. unpack command
D. pack command
E. Node Manager
F. WLST
G. Configuration Wizard
Answer: B, D, F
Q60
View the following file excerpt, which configures HTTP session replication:
<session - descriptor >
<persistent-store-type>replicated</persistent-store-type> </session-descriptor>
From which file is this excerpt taken?
A. weblogic-application.xml
B. weblogic.xml
C. session.xml
D. config.xml
E. web.xml
Answer: B
Q61
You use a web browser to log in to a web application that is deployed to WebLogic Server. When you click link named
"publish" on the site, an "Access Denied" message appears.
Which two statements must be true about this server's security configuration?
A. The application is not associated with any security roles.
B. Multiple security realms are active at the same time.
C. Your user account is a member of a group.
D. Your user account exists in an authentication provider.
E. A security policy is attached to the "publish" link URL.
Answer: D, E
Q62
You have set Server log Rotation criteria to either size or time. When a domain is in Production Mode, which statement
is true?
A. Log files are rotated when the server restarts.
B. Log files are not rotated in Production Mode.
C. Log files are rotated only when the rotation criteria are met.
D. Log files are rotated when the rotation criteria are met or rotated when the server restarts
Pgina 15 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Answer: C
Q63
Which three methods does WebLogic provide to implement persistent JMS messaging?
A. Create a file store and assign it to a JMS server.
B. Create a JDBC store and assign it to a JMS server.
C. Configure a file store within a JMS module.
D. Configure the domain's default store.
E. Use the target server's default store.
Answer: A, B, E
Q64
Managed Server Independence enabled is not selected in the configuration of myserver1. Which statement is true?
A. Only the Node Manager can start myserver1
B. Only a local start script can start myserver1
C. Myserver1 cannot be part of a cluster.
D. The Administration Server must be available before starting myserver1
Answer: D
Q65
You have opened a terminal window (or a Window command prompt) to run a WLST script named weeklydeployer.py.
You enter the following command:
Java weblogic.WLST weeklydeployer.py
Instead of the WLST initializing and the script running, however, you receive the NoClassDefFoundError java exception
for weblogic/WLST.
What is the problem?
A. You forgot to set PATH to include the java executable.
B. There is an error in the code of the script.
C. You forgot to set CLASSPATH to include weblogic.jar.
D. You are not in the directory where weeklydeployer.py resides.
E. You should have omitted the ".py" in the file name; it is assumed by WLST.
F. You forgot to set PATH to include the WLST executable.
Answer: C
Q66
You monitor a running JMS topic with the console and note the following values:
Consumers Current = 3
Message Current = 1
Message Pending = 0
These values do not change for several minutes. Which is the most plausible explanation?
A. Production on the topic has been paused.
B. A message arrived after a durable subscriber disconnected from the topic.
C. One of the consumers received a message but did not acknowledge it.
D. None of the consumers are durable subscriber.
Answer: B
Pgina 16 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Q67
Which statement best describes WebLog's default application staging behavior?
A. The Administration Sever distributes application files when the application is first accessed by a client.
B. The Administration Sever copied application files to a database that is shared with the Managed Servers.
C. The Managed Servers obtain application files from a disk that is shared with the Administration Server.
D. The Administration Sever distributes copied of application files over the network to the Managed Servers.
Answer: D
Q68
Identify two valid elements that can belong in the weblogic-application.xml deployment descriptor.
A. <shared-library-reference>
B. <library-ref>
C. <app-scoped-ref>
D. <work-manager>
Answer: B, D
Q69
You create a system-wide JMS module named Payroll-JMS and set its default target to an existing cluster in your domain
named PayrollCluster. Next, you add a standard JMS topic to Payroll-JMS.
To which are you permitted to target this topic?
A. the entire PayrollCluster
B. any single JMS server in the domain
C. any combination of member servers in Payrollcluster
D. several JMS servers targeted to PayrollCluster
Answer: B
Q70
The project's architect has provided you with a design diagram that identifies the key components of the new insurance
system. From the diagram, you can clearly see that JMS will be used as the communication channel between several
applications. Identify four tasks that you may need to perform to support this design.
A. Create a JMS server
B. Create a JMS message template
C. Add JMS destinations to a JMS module
D. Add a JMS module to a JMS factory
E. Target JMS destinations to JMS servers
F. Target a JMS server to a WebLogic Server
G. Target a JMS module to a JMS store
Answer: A, C, E, F
Q71
Which three statements are true about the Node Manager?
A. The Node Manager can restart the Managed Serves that have failed.
B. The Node Manager should be run as either a daemon or a service so that if the host computer is rebooted, the Node
Manager will also be automatically started.
C. The Node Manager runs on a different host from the Managed Server it is controlling.
D. The Node Manager can start a Managed Server the first time the Managed Server starts if the
Administration Server is unavailable because MSI mode is enabled by default.
E. The Node Manager allows you to start Managed Servers from the administration console.
Answer: A, B, E
Pgina 17 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Q72
You have made several changes to variable attributes on a managed server within a domain.
You first locked the console, made some non-dynamic changes, made some dynamic changes as well, and then
activated your changes. Which statement is true?
A. All the changes that you made on the server will take effect immediately.
B. The dynamic changes that you made will take effect immediately and the changes that are
Non-dynamic will take effect after the server is restarted.
C. The changes that you made on the server will not take effect until you restart the server.
D. You will receive an error because you cannot make dynamic and non-dynamic changes to a server at the same time.
Answer: C
Q73
When you use the Embedded LDAP that is supplied by Oracle WebLogic Server, which three statements are true?
A. The Embedded LDAP can be used to store user, group, security roles and security policies for the WebLogic security
providers.
B. The Embedded LDAP uses the file system to store Weblogic security provider data.
C. The Embedded LDAP can be accessed by an external LDAP viewer.
D. The Embedded LDAP cannot be used in a production environment
E. The Embedded LDAP can store Auditing Data.
Answer: A, C, E
Q74
An application is deployed to your domain and its manifest indicates version 1.1. You then perform an application update
by using a manifest that indicates version 1.2.
Identify two outcomes of this scenario.
A. The existing 1.1 clients are redirected to the 1.2 application
B. The existing 1.1 clients are shown a warning message.
C. The existing 1.1 clients continue to use the 1.1 application.
D. New clients are asked which version they wish to use.
E. New clients use only use 1.2 application
Answer: C, E
Q75
Pgina 18 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Pgina 19 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Answer: B
Q80
When using the Install Application Assistant in the administrator console, what are the two options that may select for
"Choose Targeting Style"?
A. Choosing "Install this deployment as a resource" will allow you to deploy any type of resource archive.
B. Choosing "Install this deployment as a library" will allow you to deploy any archive, which can be referenced by other
applications.
C. Choosing "Install this deployment as expanded format" allow expanded directories to be utilized.
D. Choosing "Install this deployment as an application" will allow you to deploy any archive or extended directory.
E. Choosing "Install this deployment as a stand-alone library" will allow you to deploy a library, which can be used only
by non-clustered servers.
Answer: B, D
Q81
You wish to provide failover for HTTP sessions within a cluster. However, you are limited by the following constraints:
1. While under load, your servers have very little free memory.
2. You do not have appropriate access rights to modify your company's database.
Which is the best option, given these restrictions?
A. in-memory replication
B. automatic migration
C. file persistence
D. JDBC persistence
E. replication groups
Answer: C
Q82
Identify three tools that you can use to create a deployment plan.
A. administration console
B. weblogic.PlanGenerator
C. the /autodeploy folder that is locked in the domain directory
D. developer tools such as JDeveloper or Eclipse
E. the /plan subfolder that resides outside the application archive
Answer: A, B, D
Q83
While creating a new domain in the Configuration Wizard, there are two types of machines that may be configured.
Identify them.
A. Machine and Windows machine
B. administrator machine and managed machine
C. machine and Unix machine
D. stand-alone machine and cluster machine
E. RDBMS machine and LDAP machine
Answer: B
Pgina 20 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Q84
Pgina 21 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Answer: C, D, E
Q88
Which answer best describes how you can start the Java-based version of the Node Manager?
A. W1scontrol.sh (.cmd in Windows)
B. Wisifconfig.sh (.cmd in Windows)
C. startNodeManager.sh (.cmd in Windows)
D. startNM.sh (.cmd in Windows)
Answer: C
Q89
Which two statements are true about Log Filters?
A. Log Filters are created at the domain level.
B. You do not have to lock the configuration to create Log Filters.
C. You can apply a Log Filter to the server log, but not to standard out.
D. The administration console assists in the creation of Log Filter expressions
Answer: A, D
Q90
Consider a domain with an existing JDBC data source, which connects to an Oracle database. Your administrator
requests that the JDBC connections to this database now specify a different username.
Which data source attribute would you modify to implement this requirement?
A. Properties
B. Credentials
C. Initial Capacity
D. Test Table
E. URL
Answer: A
Q91
Which two are typically found in the WEB-INF folder of a Java web application?
A. the web application HTML and JSP files
B. the classes directory containing the compiled classes
C. the web.xml deployment descriptor
D. the weblogicserver.xml deployment descriptor
Answer: B, C
Q92
Which four tasks can be accomplished in the administration console only after the configuration is locked?
A. deploying an application
B. changing console preferences
C. creating a new JMS Server
D. monitoring the health of a server
E. enabling the Administrator Port
F. creating a new Managed Server
G. adding a new user to the default authentication provider
Answer: A, C, E, F
Pgina 22 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Q93
A web application called sales was deployed and is currently "Active". It is targeted to managed1 and managed2. The
developers have given you an upload WAR file and you have replaced the original WAR file with it. From the directory
where the WAR file resides, you run the following weblogic.Deployer command: java weblogic.Deployer admin url
t3://192.168.1.101:7001-username weblogic -password welcom1 name sales -redeploy
Which statement best describes what happens?
A. The command fails because no target was specified.
B. The application is deployed to the Administration Server because no target was specified.
C. The application is deployed to whichever server is running at 192.168.1.101:7001.
D. The application is deployed to managed1 and managed2 because that is where it is currently targeted.
Answer: D
Q94
When creating a new Managed Server using the administration console, which two points must be considered?
A. The Server Name must be unique within the domain.
B. After you assign a Listen Port value for the server, you cannot change it
C. The Listen Port value must be unique for ever server.
D. The Server Name cannot be changed after you have created the server.
Answer: A, D
Q95
Identify two attributes of a JMS server.
A. Target
B. Persistent Store
C. Destination
D. Connection Factory
E. Store and Forward
Answer: A, B
Q96
The master Embedded LDAP has the capability to back up its data. Which statement is true?
A. The Managed Servers should be shut down when backups are being performed on the Embedded LDAP.
B. The backup feature is enabled by default.
C. The backup feature of the Embedded LDAP should be enabled for all the servers in the domain on a per-basis.
D. The backup is stored in a comma-separated variable format.
Answer: C
Q97
Identify two requirements for in-memory session replication.
A. Clusters must contain an even number of members.
B. Web applications must be configured to use replication.
C. Web applications must be deployed as an archive file.
D. Cluster members must be started by using the Node Manager.
E. Web applications must be accessed via a proxy that supports session cookies
Answer: B, E
Pgina 23 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Q98
You are deploying an EAR by using the administration console. You are part way through the process. In the
administration console, you see that the EAR has the State of "Prepared."
What can you do in the administration console to bring the deployment to the "Active" State?
A. Select it and click the Install button.
B. Select it, and then from the Install drop-down list, select "Servicing all requests"
C. Select it, and then from the update drop-down list, select "Servicing all requests"
D. Select it, and then from the Start drop-down list, select "Servicing all requests"
E. Select it, and then from the Start drop-down list, select "Servicing only administration requests"
Answer: D
Q99
Your domain includes a cluster of five servers, but only three are currently running. A colleague then uses the
administration console to install and deploy a new EJB application to the cluster.
By default, which outcome would you expect?
A. The application deploys successfully on the three servers that are running.
B. The deployment fails because the entire cluster is not running.
C. The deployment succeeds, but the application is not accessible.
D. The user is prompted to start the two unavailable servers before continuing.
E. The two unavailable servers are automatically removed from the cluster.
Answer: A
Q100
Consider an IT infrastructure comprising several web and EJB applications. Each application is expected to handle
significantly different workloads, and therefore has different resource and scalability requirements. Which is the best
solution for this scenario?
A. Configure a dedicated server for each application.
B. Configure a separate cluster for each application.
C. Configure a separate domain for each application.
D. Configure a separate proxy for each application.
Answer: B
Q101
Which two statements are true about cluster configuration?
A. A server must be running before it can be added to a cluster.
B. You cannot define cluster membership through the Configuration Wizard.
C. The console allows you to add new and existing servers to a cluster.
D. The console allows you to add an administration server to a cluster.
E. You cannot remove a server that is running from a cluster.
Answer: C, E
Q102
Which four statements are true about WLST?
A. You can create a domain with WLST.
B. WLST commands are case-insensitive.
C. You can shut down servers with WLST.
D. All WLST commands include parentheses.
E. WLST is based on the Perl scripting language.
F. You can connect to any server through WLST.
G. The Administration Server needs to be running to use WLST.
Pgina 24 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Answer: A, C, D, F
Q103
Identify two server attributes that you must configure to communicate with the server via HTTPS.
A. SSL Listen Address
B. SSL Listen Port
C. SSL Listen Port Enabled
D. Production Mode Enabled
E. Startup Mode
Answer: B, C
Q104
Consider a cluster of four servers: ServerA, ServerB, ServerC, and ServerD. The cluster hosts a web application and is
accessed using a proxy pug-in. This web application is configured to use in-memory session replication.
A user is directed to ServerA. An HTTP session is established on ServerA and is also replicated to ServerC. If ServerA
subsequently fails, which server will this user be redirected to?
A. none; the user will receive an error message
B. ServerB
C. ServerC
D. ServerD
E. Any other available server
Answer: E
Q105
Which three techniques can create a new WebLogic domain?
A. Configuration Wizard
B. Domain Template Builder
C. WLST
D. Administration console
E. Unpack command
F. Node Manager
Answer: A, C, E
Q106
Which four tasks are required to use database persistence for JMS messages?
A. Assign a data source to a JDBC store.
B. Configure a data source's delivery mode.
C. Assign a JDBC store to a JMS server.
D. Create a JDBC data source.
E. Disable a server's file store.
F. Create a JDBC store.
Answer: A, C, D, F
Q107
When describing a WebLogic domain, which three statements are true?
A. A domain may be set up in either Production Mode Production Mode or Development Mode.
B. All instances of WebLogic Server must be defined within a domain.
C. The domain configuration is stored in Oracle database by default.
D. Any instance of WebLogic Server may update the domain configuration
E. The security realm for a domain is optional.
F. A domain maybe created by using the Configuration Wizard.
Pgina 25 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Answer: A, B, F
Q108
You are responsible for configuration a WebLogic domain to support an order processing application.
This application will communicate with multiple JDBC data sources to fulfill each customer order. To maintain data
integrity across these databases, work will be performed within a global transaction.
However, you have learned that one of the data sources in the transaction does not have an XA driver.
Which option should you select on this non-XA data source to ensure that orders are still processed as global
transactions?
A. Ignore Heuristics
B. Planned to Thread
C. Password Encrypted
D. Logging Last Resource
E. Test Connections on Reserve
Answer: D
Q109
You are installing Oracle WebLogic Server 11g for some new developers in the department. They have asked for a very
generic installation for development and want you to ensure that the "MedRec" sample domain is included. What should
you do to accomplish this?
A. Select the typical installation because the "MedRec" sample domain is included in it.
B. You won't be able to do this, because all the samples were removed from the installer after 10g.
C. Select the custom installation and select Server Examples.
D. After installation, create a sample domain named "MedRec" by using the Configuration Wizard.
Answer: C
Q110
Consider the following excerpt from mod_wl_ohs.conf:
<IfModule weblogic_module>
WebLogicCluster 192.168.13.1:7001, 192.168.13.2:7001,192.168.13.2:7001 </IfModule>
<Location /welcome>
SetHandler weblogic-handler
</Location>
Assuming that this is a valid is a valid configuration, which two conclusions can you make?
A. A web application name "welcome" is configured to use session replication.
B. A web application that uses the paths "welcome" is targeted to the cluster.
C. The proxy server will ignore any requests that contain the name "welcome."
D. The proxy server is listening on the host name "welcome."
E. A cluster exists that consists of at least two managed servers.
F. All cluster members are running on the same machine.
Answer: B, E
Q111
Which two statements are true about data sources that have been created?
A. Data sources must be targeted to a server.
B. Data sources must be bound in the JDNI tree of a server.
C. Data sources are an Oracle WebLogic Server-specific feature.
D. Data sources are tied directly to a connection pool.
E. Data sources are required for a domain.
Answer: B, D
Pgina 26 de 27
Middleware Consulting Services | Project Management Services | Training Services.
Q112
Which three statements are true about the administration console?
A. The administration console cannot be disabled
B. The context path of the administration console may be changed.
C. The administration console may be extended
D. If a domain is in Development Mode, the administration console no longer requires an administration-level user when
logging in.
E. If a domain is in Production Mode, access to the administration console must be made through secure port.
F. If the domains Administration Port is enabled, access to the administration console must be made only through that
port.
Answer: B, C, F
Pgina 27 de 27
Middleware Consulting Services | Project Management Services | Training Services.