Академический Документы
Профессиональный Документы
Культура Документы
This update gives you a listing of all Australian Standards, draft standards, amendments and other
publications issued in August 2016.
To help you identify publications of interest, there are three separate listings:
For full details of each document, click on link provided or, if you are working off a paper copy, go to
infostore.saiglobal.com/store and key in the reference number.
(Section Links)
25 - MANUFACTURING ENGINEERING
DR2 AS/NZS 5131:2016 CP
Structural steelwork - Fabrication and erection
DR AS ISO 16739:2016 CP
Industry Foundation Classes (IFC) for data
sharing in the construction and facility
management industries
Page 1
29 - ELECTRICAL ENGINEERING
79 - WOOD TECHNOLOGY
DR AS/NZS 1328:2016
Glued laminated structural timber - Performance
requirements
DR AS/NZS 1577:2016
Scaffold decking components
DR AS/NZS 62560:2016
Self-ballasted LED-lamps for general lighting
services by voltage >50 V - Safety specifications
(IEC 62560, Ed. 1.1:2015, MOD)
Proposes the adoption of IEC 62560, Ed. 1.1:2015,
wich specifies the safety and interchangeability
requirements, together with the test methods and
conditions required to show compliance of LED-lamps
with integrated means for stable operation (selfballasted LED-lamps), intended for domestic and similar
general lighting purposes, having a rated wattage up to
60 W and a rated voltage of >50 V up to 250 V.
Proposed as an Australian/New Zealand Standard.
> Click for further information
DR AS/NZS 80079.20.2:2016 CP
Explosive atmospheres - Material characteristics Combustible dusts test methods
DR AS ISO/IEC/IEEE 24748.4:2016 CP
System and software engineering - Life cycle
management - Systems engineering planning
DR AS/NZS 1859.1:2016
Reconstituted wood-based panels - Specifications
- Particleboard
> Click for further information
DR AS/NZS 1859.2:2016
Reconstituted wood-based panels - Specifications
- Dry process fibreboard
> Click for further information
DR AS/NZS 1859.3:2016
Reconstituted wood-based panels - Specifications
- Decorative overlaid wood panels
> Click for further information
DR AS/NZS 1860.1:2016
Particleboard flooring - Specifications
> Click for further information
DR AS/NZS 4266.1:2016
Reconstituted wood-based panels - Methods of
testing - Base panels
> Click for further information
DR AS/NZS 4266.2:2016
Reconstituted wood-based panels - Methods of
test - Decorative overlaid panels
> Click for further information
85 - PAPER TECHNOLOGY
DR AS/NZS 1301.530:2016 CP
Methods of test for pulp and paper Determination of colour by diffuse reflectance Indoor daylight conditions (C/2 degrees)
> Click for further information
DR AS/NZS 1301.535:2016 CP
Methods of test for pulp and paper Determination of colour by diffuse reflectance Outdoor daylight conditions (D65/10 degrees)
> Click for further information
DR AS/NZS 1301.540:2016 CP
Methods of test for pulp and paper Determination of colour by diffuse reflectance Indoor illumination conditions (D50/2 degrees)
> Click for further information
Page 2
DR AS/NZS 1328:2016
Glued laminated structural timber - Performance
requirements
> Click for further information
DR AS/NZS 1577:2016
Scaffold decking components
> Click for further information
DR AS/NZS 1859.1:2016
Reconstituted wood-based panels - Specifications
- Particleboard
> Click for further information
DR AS/NZS 1859.2:2016
Reconstituted wood-based panels - Specifications
- Dry process fibreboard
> Click for further information
DR AS/NZS 1859.3:2016
Reconstituted wood-based panels - Specifications
- Decorative overlaid wood panels
> Click for further information
DR AS/NZS 1860.1:2016
Particleboard flooring - Specifications
DR AS/NZS 4266.1:2016
Reconstituted wood-based panels - Methods of
testing - Base panels
> Click for further information
DR AS/NZS 4266.2:2016
Reconstituted wood-based panels - Methods of
test - Decorative overlaid panels
> Click for further information
DR AS/NZS 8124.7:2016
Safety of toys - Requirements and test methods
for finger paints (ISO 8124-7:2015, MOD)
DR AS/NZS 2589:2016
Gypsum linings - Application and finishing
DR AS/NZS 8124.12:2016
Safety of toys - Determination of total
concentration of certain elements in toys (ISO
8124-5:2015, MOD)
AS 1079.5-2003
Packaging of items (sterile) for patient care Single-use, non-woven wrapping materials - For
goods undergoing sterilization in health care
facilities
AS 1150-1983
Artificial illumination in ships
AS 1824.1-1995
Insulation co-ordination - Definitions, principles
and rules
AS 1824.2-1985
Insulation coordination (phase-to-earth and
phase-to-phase, above 1 kV) - Application guide
AS 1931.1-1996
High-voltage test techniques - General definitions
and test requirements
Page 3
AS 1931.2-1996
High-voltage test techniques - Measuring
systems
AS 2024-1991
High voltage a.c. switchgear and controlgear Switch-fuse combinations
AS 2359.7-1995
Powered industrial trucks - Terminology
AS 2359.13-2005
Powered industrial trucks - Brake performance
and component strength
AS 2723-1984
Waters - Determination of uranium (VI) Spectrophotometric method
AS 2791-1996
High-voltage switchgear and controlgear - Use
and handling of sulphur hexafluoride (SF6) in
high-voltage switchgear and controlgear
AS 3768-1990
Guide to the effects of temperature on electrical
equipment
AS 3865-1991
Calculation of the effects of short-circuit currents
AS 4143.5-1993
Methods of test for fibre ropes - Resistance to
flexion and surface abrasion
AS 4143.6-1996
Methods of test for fibre ropes - Resistance to
abrasion
AS/NZS 4275.0:1995
Methods of testing underground marking tape General introduction and list of methods
AS/NZS 4275.1:1995
Methods of testing underground marking tape Elongation at break
AS/NZS 4275.2:1995
Methods of testing underground marking tape Tear resistance
AS/NZS 4275.3:1995
Methods of testing underground marking tape Impact resistance
AS/NZS 4275.4:1995
Methods of testing underground marking tape Chemical resistance
AS/NZS 4275.5:1995
Methods of testing underground marking tape Background discolouration
AS/NZS 4275.6:1995
Methods of testing underground marking tape Adhesion of print
AS 4278-1995
A method for assessing the short-circuit
withstand strength of partially type-tested
assemblies (PTTA)
AS 4470-1997
Fishing line - Determination of breaking load
AS 4972(Int)-2001
Counterbalanced trucks handling freight
containers of 6 m (20 ft) length and above Additional stability tests
AS 6001-1999
Working platforms for housing construction
AS 60265.2-2005
High-voltage switches - High-voltage switches for
rated voltages of 52 kV and above (IEC 60265-2,
Ed.1.0(1988) MOD)
AS/NZS 61459:2000
Low-voltage fuses - Coordination between fuses
and contactors/motor-starters - Application guide
ATS 61915-2005
Low-voltage switchgear and controlgear Principles for the development of device profiles
for networked industrial devices
AS 62208-2006
Empty enclosures for low-voltage switchgear and
controlgear assemblies - General requirements
AS 62271.308-2005
High voltage switchgear and controlgear - Guide
for asymmetrical short-circuit breaking test duty
T100a
HB 155-2002
Guide to the use of recycled concrete and
masonry materials
HB 64-2002
Guide to concrete construction
HB 67-1995
Concrete practice on building sites
Drafts
Page 4
DR AS 1012.14:2016
Methods of testing concrete - Method for securing and testing cores from hardened
concrete for compressive strength
DR AS/NZS 1301.530:2016 CP
Methods of test for pulp and paper - Determination of colour by diffuse reflectance Indoor daylight conditions (C/2 degrees)
DR AS/NZS 1301.535:2016 CP
Methods of test for pulp and paper - Determination of colour by diffuse reflectance Outdoor daylight conditions (D65/10 degrees)
DR AS/NZS 1301.540:2016 CP
Methods of test for pulp and paper - Determination of colour by diffuse reflectance Indoor illumination conditions (D50/2 degrees)
DR AS/NZS 1328:2016
Glued laminated structural timber - Performance requirements
DR AS/NZS 1577:2016
Scaffold decking components
DR AS/NZS 1596:2014 Amd 1:2016
The storage and handling of LP Gas
DR AS/NZS 1859.1:2016
Reconstituted wood-based panels - Specifications - Particleboard
DR AS/NZS 1859.2:2016
Reconstituted wood-based panels - Specifications - Dry process fibreboard
DR AS/NZS 1859.3:2016
Reconstituted wood-based panels - Specifications - Decorative overlaid wood panels
DR AS/NZS 1860.1:2016
Particleboard flooring - Specifications
DR2 AS/NZS 2311:2016
Guide to the painting of buildings
DR AS/NZS 2589:2016
Gypsum linings - Application and finishing
DR AS/NZS 2638.1:2011 Amd 1:2016
Gate valves for waterworks purposes - Metal seated
DR AS/NZS 2638.2:2011 Amd 1:2016
Gate valves for waterworks purposes - Resilient seated
DR AS/NZS 3105:2014 Amd 1:2016
Approval and test specification - Electrical portable outlet devices
DR AS 3662-2013 Amd 1:2016
Performance of showers for bathing
DR AS/NZS 4266.1:2016
Reconstituted wood-based panels - Methods of testing - Base panels
DR AS/NZS 4266.2:2016
Reconstituted wood-based panels - Methods of test - Decorative overlaid panels
DR AS/NZS 4871.3:2010 Amd 1:2016
Electrical equipment for mines and quarries - Substations
DR2 AS/NZS 5131:2016 CP
Structural steelwork - Fabrication and erection
DR AS/NZS 5601.2:2013 Amd 2:2016 CP
Gas installations - LP Gas installations in caravans and boats for non-propulsive
purposes
DR AS/NZS 8124.7:2016
Safety of toys - Requirements and test methods for finger paints (ISO 81247:2015, MOD)
DR AS/NZS 8124.12:2016
Safety of toys - Determination of total concentration of certain elements in toys
(ISO 8124-5:2015, MOD)
DR AS ISO 16739:2016 CP
Industry Foundation Classes (IFC) for data sharing in the construction and facility
management industries
Page 5
DR AS ISO/IEC/IEEE 24748.4:2016 CP
System and software engineering - Life cycle management - Systems engineering
planning
DR AS/NZS 60238:2015 Amd 2:2016
Edison screw lampholders (IEC 60238, Ed. 8.2 (2011) MOD)
DR AS/NZS 61184:2015 Amd 2:2016
Bayonet lampholders (IEC 61184, Ed. 3.1 (2011) MOD)
DR AS/NZS 62560:2016
Self-ballasted LED-lamps for general lighting services by voltage >50 V - Safety
specifications (IEC 62560, Ed. 1.1:2015, MOD)
DR AS/NZS 80079.20.2:2016 CP
Explosive atmospheres - Material characteristics - Combustible dusts test methods
Amendments
AS/NZS 1170.2:2011/Amdt 4:2016
Structural design actions - Wind actions
Amendments
With a handful of exceptions, Amendments to Australia Standards are free of charge if downloaded from
the SAI Global Infostore. Use this archive to check if a current Standard has been amended.
Copyright Information
Australian Standards is the registered trade mark of Standards Australia Limited. Australian Standards
standards and other publications are distributed by SAI Global under licence.
Buying Information
Web
infostore.saiglobal.com/store
Phone
Fax
SAI Global Ltd, GPO Box 5420, Sydney NSW 2001, Australia
Sales Outlet
85 Buckhurst Street, South Melbourne VIC 3205
SAI Global Limited ABN 67 050 611 642
Page 6