Вы находитесь на странице: 1из 1

KLS GOGTE INSTITUTE OF TECHNOLOGY, BELAGAVI

Department of Electronics & Communication Engineering

Internal Assessment Test No.


Subject
Date & Time

: II
: Digital Signal Processing
: 06.10.2016 @ 10.00am

Semester
Subject Code
Duration
Max. Marks

:V
: 10EC52
: 1 Hr
: 25

1. Design a digital low-pass filter using a Bilinear transformation method to satisfy the following characteristics, (a)
Monotonic passband and stopband, (b) -3.01dB at cutoff frequency of 0.5 rad, and (c) Magnitude down atleast 15dB
at 0.75 rad. (12.5M) OR
Write an explanatory note Chebyshev Analog filter design (Compare with Butterworth filter design, Chebyshev
polynomial & its properties, Derive Order, Pole location identification with example) (12.5M)
2. The normalized transfer function of an analog filter is given by

. Obtain the transfer function

of an equivalent digital filter using the Matched Z-Transform method. Assume 3dB cutoff frequency of 150Hz and a
sampling frequency of 1.28kHz. (7M)
Write note on Approximation of derivatives method and it's properties. (5.5M)
KLS GOGTE INSTITUTE OF TECHNOLOGY, BELAGAVI
Department of Electronics & Communication Engineering

Internal Assessment Test No.


Subject
Date & Time

: II
: Digital Signal Processing
: 06.10.2016 @ 10.00am

Semester
Subject Code
Duration
Max. Marks

:V
: 10EC52
: 1 Hr
: 25

1. Design a digital low-pass filter using a Bilinear transformation method to satisfy the following characteristics, (a)
Monotonic passband and stopband, (b) -3.01dB at cutoff frequency of 0.5 rad, and (c) Magnitude down atleast 15dB
at 0.75 rad. (12.5M) OR
Write an explanatory note Chebyshev Analog filter design (Compare with Butterworth filter design, Chebyshev
polynomial & its properties, Derive Order, Pole location identification with example) (12.5M)
2. The normalized transfer function of an analog filter is given by

. Obtain the transfer function

of an equivalent digital filter using the Matched Z-Transform method. Assume 3dB cutoff frequency of 150Hz and a
sampling frequency of 1.28kHz. (7M)
Write note on Approximation of derivatives method and it's properties. (5.5M)
KLS GOGTE INSTITUTE OF TECHNOLOGY, BELAGAVI
Department of Electronics & Communication Engineering

Internal Assessment Test No.


Subject
Date & Time

: II
: Digital Signal Processing
: 06.10.2016 @ 10.00am

Semester
Subject Code
Duration
Max. Marks

:V
: 10EC52
: 1 Hr
: 25

1. Design a digital low-pass filter using a Bilinear transformation method to satisfy the following characteristics, (a)
Monotonic passband and stopband, (b) -3.01dB at cutoff frequency of 0.5 rad, and (c) Magnitude down atleast 15dB
at 0.75 rad. (12.5M) OR
Write an explanatory note Chebyshev Analog filter design (Compare with Butterworth filter design, Chebyshev
polynomial & its properties, Derive Order, Pole location identification with example) (12.5M)
2. The normalized transfer function of an analog filter is given by

. Obtain the transfer function

of an equivalent digital filter using the Matched Z-Transform method. Assume 3dB cutoff frequency of 150Hz and a
sampling frequency of 1.28kHz. (7M)
Write note on Approximation of derivatives method and it's properties. (5.5M)

Вам также может понравиться