Академический Документы
Профессиональный Документы
Культура Документы
DATA SHEET
Edition May 1998
Paradiene FM
PRACTICAL ADVANTAGES:
Exceptional properties of SBS elastomeric bitumen.
Easy absorption of substrate movements due to the mechanical fixing.
High resistance to cracking due to the elasticity of the SBS elastomeric bitumen.
High resistance to pull-off.
High resistance to puncturing (composite glass-polyester reinforcement).
Two layers, one torch-welted interface, one torch, and the equivalent of three fixings
per square meter on the main area.
Easy torching of the joint due to the fusible film on the underface.
When re-roofing, removal of the existing waterproofing system is unnecessary.
Most suitable application:
Waterproofing on steel deck roof.
Most suitable system:
Double layer waterproofing system mechanically fixed on steel deck roof:
Paradiene FM + Paradiene 30.1 AS/GS.
Other applications:
On new projects or re-roofing (without removal of the existing system): waterproofing
on steel, wood and plywood supporting decks.
TECHNICAL
CHARACTERISTICS
SCOPE
OF APPLICATION
Coloured gra nules finished d o u ble laye r s y s t e m ,
specifically designed to be m e ch a n i c a l ly fixed onto
m i n e ral wool thermal insulation boards being supported
by steel decking (slope > 1%).
Remarks about the wearing elements and substrates
Paradiene
30.1
AS/GS
On
steel deck
roofs
(see DTU 20.12)(1).
On wood boarding and exterior grade plywood (see
DTU 43.4) ( 1 ) or c ompositeboards (see CSTB
Agrement Certificate(2).
On non bearing insulation boards (see CSTB
Agrement Certificate(2).
On concrete (see DTU 20.12)(1) or cellular concrete
slabs (see CSTB Agrement Certificate(2)).
UEAtc(3) (%)
250
4
>15
INSTALLATION
Paradiene FM: by linear mechanical fixing at the 10 cm
wide overlap.Then the lapped joints are fully torched.
Paradiene FM:
SBS
elastome
ric bitumen fusible film overfaced memParadiene
FM
brane - Rolls 10 m x 1 m,
- Thickness: 2,5 mm - Weight: 34 kg;
- Polyester composite reinforcement: 130g/m2.
First layer in a double layer mechanically fixed SBS
elastomeric bitumen waterproofing system.
Selvedge with a guide line for mechanical fixings.
Paradiene 30.1 AS/GS: see Paradiene product data
sheet.
DESCRIPTION
sand
selvedge
2 mark-lines
COMPLEMENTARY
INFORMATION
fusible film
This document is only a guide. SIPLAST reserves the right to change the composition and fixing recommendations of products as a result of the evolution of knowledge and technology.
12, rue Cabanis 75680 PARIS CEDEX 14 FRANCE. Tel.: 33 1 40 78 35 00 - Telex: 204 752 F - Fax: 33 1 45 88 56 87