Академический Документы
Профессиональный Документы
Культура Документы
Activity
No.
Activity Description
Inspection/Test Requirements
Reference Document
SURVEY
1
Equipment Identification
Manufacturers specification
Supplier Drawings
Excavation
verify all Earth work baselines are set outside of the excavated areas to
WPS
Visual Inspection Procedure
NDE Procedures
Applicable Codes
Bolt tightening
avoid destruction
Company Specifications
Material Identification
Welding ( if required )
WPS
Visual Inspection Procedure
NDE Procedures
Applicable Codes
10
Bolt tightening
* Verify that all the bolts are secure and tightened according to project
drawings and specifications.
11
Company Specifications
DINAMIK / SYA
LOGO
DINAMIK
TANAP LOGO
Activity
No.
Activity Description
Inspection/Test Requirements
Reference Document
WALKWAYS
12
13
Material Identification
14
Welding ( if required )
15
Bolt tightening
* Verify that all the bolts are secure and tightened according to project
drawings and specifications.
16
Company Specifications
Material Identification
18
19
Positioning Check
Supplier Drawings
20
Bolt tightening
* Verify that all the bolts are secure and tightened according to project
drawings and specifications.
21
Document review
Quality Dossier
22
Company Specifications
DINAMIK / SYA
LOGO
DINAMIK
TANAP LOGO
Activity
No.
Activity Description
Inspection/Test Requirements
Reference Document
DINAMIK / SYA
LOGO
DINAMIK
INLET PIPING
23
Material Identification
24
25
Orientation contol
26
Bolt tightening
* Verify that all the bolts are secure and tightened according to project
drawings and specifications.
27
Document review
Quality Dossier
28
Company Specifications
OUTLET PIPING
29
Material Identification
30
31
Orientation contol
32
Bolt tightening
* Verify that all the bolts are secure and tightened according to project
drawings and specifications.
33
Document review
Quality Dossier
34
Company Specifications
TANAP LOGO
Activity
No.
Activity Description
Inspection/Test Requirements
Reference Document
DINAMIK / SYA
LOGO
DINAMIK
VIBRATION SWITCHES
35
Material Identification
36
37
Verify that all the attachments are placed in correct orientation on the
equipment
JUNCTION BOXES
38
Material Identification
39
40
Verify that all the attachments are placed in correct orientation on the
equipment.
INSPECTION POINT
H
Is a HOLD POINT, which no work may proceed beyond this operation until acceptance by the inspector
Is a WITNESS POINT, which no work may proceed beyond this operation until the Inspector has accepted it
Is a REVIEW POINT, which cover the review of documents & does not require acceptance of the Inspector before proceeding with next operation, but must be seen prior to stamping of the
AI
Authorized Inspector
WHC
PREPARED BY
NAME:
DATE:
SIGN:
SYA
Page:
Date :
Rev. No:
Doc.No. :
Inspection
SYA
EPCM/TANAP
Page:
Date :
Rev. No:
Doc.No. :
Inspection
SYA
EPCM/TANAP
Page:
Date :
Rev. No:
Doc.No. :
Inspection
SYA
EPCM/TANAP
W/R
W/R
W/R
W/R
W/R
W/R
W/R
W/R
W/R
Page:
Date :
Rev. No:
Doc.No. :
Inspection
SYA
EPCM/TANAP
or
pted it
ector before proceeding with next operation, but must be seen prior to stamping of the item
EPCM/TANAP