Академический Документы
Профессиональный Документы
Культура Документы
Answers:
1. B. The second Ethernet board in your Linux system is assigned an alias
of eth1 by default.
2. A. The ifconfig eth0 176.23.0.12 netmask 255.255.0.0 command will
assign the IP address and subnet mask to the eth0 interface.
3. B. The BOOTPROTO option is used to specify whether the interface uses
a static or dynamic IP address assignment.
4. D. The nameserver 10.200.200.1 directive specifies a DNS server with
an IP address of 10.200.200.1.
5. B. The dhclient eth0 command will configure the eth0 interface with IP
address information from a DHCP server.
6. A. The ifdown eth1 command will disable the second Ethernet interface
in the system.
7. B. The ping fs1.mycorp.com command will test communications
between your system and the specified host.
8. B. The route add default gw 10.200.200.254 command will add the
specified IP address as the default gateway router.