Академический Документы
Профессиональный Документы
Культура Документы
c
ccccccccccccccccccccccccccccccccccccccccccc
c
c
c
Submitted to:
Prof. Bhavanarayana
c
c
c
Submitted by:
Harsh Jain
PGDM, SEC- C
SEM 2nd
Work study
It is a systematic and analytical study of work process and work methods
with the objective of increasing efficiency and reducing costs. Work study
helps to reduce waste through standardization of qualitative and
quantitative element of job.
Objectives
^c Provide more and improved physical means to motivate the workers.
^c Improve the basic process by research and development.
^c Improve the methods of operation.
^c Improve manpower efficiency at all levels.
Procedure
1. SELECT: The job or the process or the operation to be studied.
2. RECORD: All relevant facts about the job or process or operation using
suitable charting techniques.
3. EXAMINE: Critically all the recorded facts, questioning the purpose,
place, sequence, person and the means of doing the operation.
4. DEVELOP: The new method for the operation
5. MEASURE: The work content and establish the standard time using an
appropriate work measurement technique.
6. DEFINE: The new method for the operation.
7. INSTALL: The new method as standard practice.
8. MAINTAIN: The new method for the operation
Benefits:
^c Increased productivity and operational efficiency.
^c Reduced manufacturing costs.
^c Improved work place layout.
^c Better manpower planning and capacity planning.
^c Fair wages to employees.
^c Improved work flow.
^c Basis for sound incentive schemes.
Techniques:
Method Study :
^c Select
^c Record
^c Examine
^c Develop
^c Install
^c Maintain
Work measurement:
^c Select
^c Record
^c Analyse
^c Measure
^c Compile
^c Define
Method study:
It may be understood as the systematic recording and critical
examination of existing and proposed ways of doing working, as a means
of developing and applying easier and more effective method and
reducing costs.
Objectives:
^c To study the existing/proposed method of doing any operation.
^c To develop an improved method to improve productivity and to
reduce operating costs.
^c To reduce excessive materials handling or movement and thereby
reduce fatigue of workmen.
^c To improve utilization of resources.
Procedure:
1. SELECT: The job or the process or the operation to be studied and
define the objectives to be achieved by method study.
2. RECORD: All relevant facts about to the existing method using
suitable techniques.
3. EXAMINE: Critically all the recorded facts, questioning the
purpose, place, sequence, person and the means of doing the operation.
4.c DEVELOP: The improved method by generating several alternatives
and selecting the best method.
5.c INSTALL: The improved new method in three phases planning,
arranging & implementing phases.
6. MAINTAIN: The new method by ensuring that the installed method
is functioning well.
WORK MEASUREMENT
The application of techniques designed to establish the time for a qualified
worker to carry out a specified job at a defined level of performance.
Job design:
Job design has emerged as an important area of job analysis. It is based on
growing conceptual and empirical base and has command research
attention and is being widely applied to actual practice of management.