Академический Документы
Профессиональный Документы
Культура Документы
Damage indication MP287 Printer Canon MP287 printer when turned on by pressing the power
button it will immediately appear on the LCD panel Error code E08. And when we do print
command, the printer can not print the screen and there will be a message monitor will display
the article "Waste Ink Absorber Full". first previous download MP287 Service tools or software
to reset canon MP287 printer: Here
Then follow the steps and How to Reset Printer Canon MP287 error code E08
A. Canon MP287 printer should be in SERVICE MODE.
2. Turn off the Canon MP287 Printer with power cord still attached to the position of the source
of electric current.
3. Press and Hold the button STOP / RESET
4. Press and hold the Power button.
5. Release the button STOP / RESET (power button remained in detention.)
6. In case of the Power button is still depressed, press the STOP / RESET 6x (6 times.)
7. Then release both buttons simultaneously.
8. Then the Canon MP287 will be in service mode.
9. LCD panel on the MP287 is blank / black.
10. Extract the Canon MP287 Printer Resetter software that you download.
11. Run the software tools resetter canon mp287 printer.
12. Click Main -> patern, then the printer will print one page with the words "D = 000.0"
12. Click "Clear EEPROM".
13. Then click "EEPROM", and the printer will print the MP258 Resetter. as follows:
"TPage (COPY TTL = 00 000 = 00 000)"
15. Canon MP287 printer off by pressing the power button.
16. Then blame your printer Canon MP287, error code E08 will disappear and your canon printer
returns to normal.
Whatever the case I would recommend running though the basic troubleshooting below in an
attempt to resolve the issue.
2. Switch the printer off using buttons on the body of the printer. DO NOT turn it
off at the plug.
3. Double check the label of the cartridge to ensure the correct cartridge is
being installed for your printer.
4. Wipe down the contacts on the front of the cartridge using a piece of kitchen
With any luck the cartridge will now be recognised by your printer and you will be able to carry
on printing. if however one of the E04, E05, E14 or E15 The FINE Cartridge cannot be
recognized messages remain it is likely that the cartridge is damaged/defective. Sadly in this
instance the only option that remains is to replace the cartridge, preferably one produced by
another party or from another batch.
If you have experienced this issue with multiple cartridges it may be that the corresponding
contacts inside the printer have become obscured or even damaged. Thankfully these contacts
can be easily accessed by removing the cartridge from the printer and can also be cleaned using
the same kind of tissue. These contacts can be pointed in some printers so take care not to leave
behind pieces of tissue when cleaning.
MP460, Pixma MP470, Pixma MX300 and Pixma MX310. Which of these six possible cartridges
your printer takes will depend entirely upon the model of your printer.
Along with the printer models mentioned above the cleaning of the contacts can help the PG510, CL-511, PG-512 and CL-513 range of ink cartridges be accepted by a printer. The following
printers are all compatible with these black and colour cartridges, the Canon Pixma iP2700,
Pixma iP2702, Pixma MP230, Pixma MP240, Pixma MP250, Pixma MP252, Pixma MP260,
Pixma MP270, Pixma MP272, Pixma MP280, Pixma MP282, Pixma MP330, Pixma MP480,
Pixma MP490, Pixma MP492, Pixma MP495, Pixma MP499, Pixma MX320, Pixma MX330,
Pixma MX340, Pixma MX350, Pixma MX410 and Pixma MX420.
You can even use the above advice to clear the E04, E05, E14 and E15 errors with the
Canon Pixma MG2150, Pixma MG2250, Pixma MG3150, Pixma MG3155, Pixma MG3250,
Pixma MG3550, Pixma MG4150, Pixma MG4250, Pixma MX375, Pixma MX395, Pixma
MX435, Pixma MX455, Pixma MX515 and Pixma MX525. These printers take the relatively new
Canon PG-540, Cl-541, PG-540XL and CL-541XL ink cartridges.
I hope this has resolved the issue you were experiencing. If however you have any further
questions please let us know in the comments.