Академический Документы
Профессиональный Документы
Культура Документы
Conduct a suitable experiment to obtain the magnetization characteristics at 1200 rpm and
find the critical speed of the given DC machine which delivers electrical power, has a parallel
field winding and capable of building its own field. Also verify whether the machine is able
to build up the voltage below the critical speed.(Self-excited DC generator)
2. Conduct a suitable experiment on the given DC machine which has a parallel field
winding, delivers electrical power and is excited by a DC source. Plot the terminal
characteristics of the machine.(Separately excited)
3. Identity the different ways of connecting the two field windings of a DC machine which is
based on the principle that when a conductor is rotated in a magnetic field, a voltage will be
generated in the conductor. Plot the voltage current characteristics of DC machine when the
flux produced by both the field winding aid each other.(Compound generator-cumulative)
4. Plot the performance at 30%, 50%, 80% and 100% of full load on the given machine DC
machine which converts electrical energy into mechanical energy. The DC machine has both
shunt field and series field winding.(Load test on compound motor)
5. Plot the speed-torque characteristics of the DC machine which is used for constant speed
applications like lathes, centrifugal pumps and blowers.(Load test on shunt motor)
6. Conduct a suitable experiment to determine the efficiency and to obtain the performance
characteristics at 30%, 60%, 90% and 100% of full load on the given DC machine with a
series field winding and very high starting torque.(Load test on DC series motor)
7. By indirect testing of the given DC machine predetermine the efficiency of the machine
when it works as motor and plot the efficiency curve. Also plot the efficiency curve of the
given DC machine when it works as generator for 20%, 40%, 60%, 80%, 100% and 120% of
the full load.(Swinburnes)
8. For a specific application in a paper manufacturing unit it is required to run a DC shunt
motor below the rated speed and also above the rated speed. Is it possible to do speed control
above as below the rate speed on the Dc shunt motor? If it is possible then experimentally
prove and plot the characteristics.(Speed control on Dc shunt motor)
9. Predetermine the efficiency of the two identical shunt machines are coupled mechanically
and also connected electrically in parallel. Plot the efficiency versus load power
characteristics of both the machines.(Hopkinsons)
10. Conduct a load test on the given static machines which consists of two electric circuits
interlinked by a common magnetic circuit and plot the efficiency versus load power
characteristics.(Load test on single phase transformer)
11. Conduct a load test on the given static three phase machine which works under the
principle of mutual induction and plot the efficiency versus load power characteristics.(3
phase transformer)
12. By conducting suitable test on the given single phase static machine draw its equivalent
circuit referred to the supply side.(Load test and short circuit)
13. Predetermine the efficiency of the machine transfers energy from one circuit to another
without a change in frequency. Plot the efficiency and regulation characteristics.(Open circuit
and short circuit test for single phase transformer)
14. Conduct a back to back test on a two identical static machines and plot the regulation and
efficiency characteristics.(Sumpners)
15. Conduct a suitable experiment to measure the iron losses in the static electric machine
and separate it into hysteresis and eddy current loss by using variable frequency approach.
(Separation of losses in single phase transformer)
16. By conducting a direct load test on the given single phase static machine determine the
efficiency of the machine under different load conditions. Plot the efficiency versus load
power characteristics.(Load test one single phase transformer)
17. Conduct a suitable experiment to predetermine the secondary terminal voltage under full
load and half load conditions and also determine the constants of the equivalent circuit by
conducting a suitable experiment. The power factor of the load may be assumed to be 0.95
leading.(No load and short circuit test)
18. Identify the different ways of connecting the two field windings of a DC machine which
is based on the principle that when a conductor is rotated in a magnetic field, a voltage will
be generated in the conductor. Plot the voltage-current characteristics of DC machine when
the flux produced by both the field windings opposes each other.(Compound generator
differential)
19. Conduct a suitable experiment to obtain the magnetization characteristics at 1200rpm and
find the critical speed of the given DC machine which delivers electrical power, has a parallel
field winding and excited by a separate source.(Separately excited)
20. Conduct suitable experiment to predetermine the efficiency characteristics of the DC
machine when working as a generator and motor excluding the stary losses.(Swinburnes)
1.
Conduct the following experiments on DC generator in which the field and armature
windings are connected in parallel and it has own residual magnetismfor its normal
operation with neat graph and explanation.
Open circuit characteristics
Load characteristics
(self-excited)
2.
Conduct the following experiments on DC generator in which the field and armature
windings are connected in parallel and requires external excitation for its normal operation
with neat graph and explanation
Open circuit characteristics
Load characteristics
(separately excited)
3.
4.
i)
ii)
iii)
iv)
5.
6.
Draw the following performance characteristics on Compound motor at 50%, 75%, 100%
and 120% of loading by conducting suitable experiment.
(a) Output power Vs load current
(b) Output power Vs efficiency
7.
Draw the following performance characteristics on series motor at 50%, 75%,100% and
120% of loading by conducting suitable experiment .
(a) Output power Vs load current
(b)Ouput power Vs efficiency
9.
(sumpners test)
19. Conduct suitable experiment on single phase transformer to calculate the no-load losses
with suitable graph.
(Separation of no load losses)
20. Conduct suitable experiment on single phase transformer to calculate the no-load losses with
neat explanation.