Академический Документы
Профессиональный Документы
Культура Документы
,LTD
www.takfiberoptic.com
Functions:
Parameters:
fiber optical
interface
Optical wavelength:
1310nm/1550nm for single-mode optic interface is optional
850nm/1310nm for multi-mode optic interface is optional
WDM single fiber(TX and RX in one fiber) lasers is available
Transmission distance:
MM 2Km/5Km is optional, SM 20km/40km/60km/80km/120km is optional
Optical interface: SC/FC/ST is optional
Sending consumption:
-9dBm/-5dBm
Receiving and dispatching module: >-6dBm
Optical receiver receiving sensitivity: <-36 (BER<10):
Optical code:
NRZ
E1 Interface
Interface Standard:
comply with protocol G.703;
Interface Rate:
n*64Kbps50ppm;
Interface Code:
HDB3;
E1 Impedance:
75 (unbalance), 120 (balance);
Jitter tolerance:
In accord with protocol G.742 and G.823
Allowed Attenuation: 0~6dBm
Ethernet interface
(10/100M)
Interface rate:
10/100 Mbps, half/full duplex auto-negotiation
Interface Standard:
Compatible with IEEE 802.3, IEEE 802.1Q
(VLAN)
MAC Address Capability: 4096
Connector:
RJ45, support Auto-MDIX
EM 2/4 Line
AD: 0dB
DA: -3.5dB
Two/Four-line Impedance: 600 Ohm
Return loss: 20 dB
RS232/RS485/RS422
Power
Dimension
Product Size:
Working environment
Typical Application
Ordering information:
Model Number
Description
TK-P-FO-08-4FE
8E1 PDH fiber optical multiplexer , FC/ST/SC, AC220V or DC48V power supply, E1 interface is BNC or RJ45, 19inch 1U,
support Console management
TK-P-FO-08-4FE