Академический Документы
Профессиональный Документы
Культура Документы
Regulations - R
Second Semester
(Common to ECE , Bio Medical Engg and Medical Electronics Engg)
EC6211 CIRCUITS AND DEVICES LABORATORY
Time: 3 Hours
1. Conduct a suitable experiment to plot the I-V characteristics of the given PN junction
diode and mark the forward current, reverse current and knee voltage.
(100)
2. Plot the V-I characteristics of Zener Diode and determine the Dynamic resistance in both
forward bias and reverse bias.
(100)
3. Conduct an experiment
(a) To determine the input and output characteristics of CE configuration. (50)
(b) Calculate the h-parameter values from the input and output characteristic curves.(50)
4. Conduct an experiment
(a) To determine the input and output characteristics of CB configuration.
(50 )
(b) Calculate the h-parameter values from the input and output characteristic curves.(50)
(100)
7. (a) Perform positive and negative clipping by using diode and observe necessary
waveforms.
(50)
(b) Perform positive and negative clipping by using diodes with reference voltage +3V
and observe necessary waveforms.
(50)
8. Construct a circuit to perform positive and negative clamping by using diode and
capacitor and observe necessary waveforms.
(100)
11. Practically verify Kirchoffs Voltage Law in the given network along with the
theoretical calculations.
(100)
R1 = 1 K
R2 = 10 K
R3 = 1.5 K
+
(0-30) V
12. Practically verify Kirchoffs Current Law in the given network along with the
theoretical calculations.
(100)
+
(0-30) V
R1
330
R2
220
R3
470
13. Practically verify Thevinins theorem in the given network along with the theoretical
calculations, also find the current through RL.
(100)
(0-30) V
R4 = 4K
R2 = 2K
R1 = 30
R5
1K
RL
1K
R3
10K
14. Practically verify Nortons theorem in the given network along with the theoretical
calculations.
(100)
R1 = 430
(0-30) V
R2 = 560
RL
1K
R3
10K
15. Practically verify Superposition theorem in the given network along with the
theoretical calculations.
(100)
R1 = 330
R2 = 220
R5 = 470
+
(0-30) V
+
-
R3
10K
R4
1 K
(0-30)V
16. Practically verify Reciprocity theorem in the given network along with the
theoretical calculations.
(100)
R2 = 2K
R1 = 30
(0-30) V
R3
10K
RL
1K
(0-50 mA)
17. Practically verify Maximum power transfer in the given network along with the
theoretical calculations.
(100)
R1 = 330
(0-30) V
+
-
R3
10K
R2 = 220
RL
1K
18. Construct a series resonance circuit for a frequency of 2 KHz. Assume C = 0.1 F.
Determine the frequency response and compare the theoretical frequency with the
practical frequency.
(100)
19. Conduct an experiment to determine the forward bias and reverse bias
characteristics of PN junction diode. Also determine the static resistance, dynamic
resistance and reverse resistance from the obtained characteristics.
(100)
20. Conduct an experiment to determine the forward bias and reverse bias
21. Construct a circuit to find transient response of RL and RC circuit. Verify results
theoretically. Assume R = 100 ,L = 50mH and C=0.1 F.
(100)