Академический Документы
Профессиональный Документы
Культура Документы
ii) Polymorphism
2.Explain Hume-Rothery rules of solid solubiity
DEC (2010)
3.what is solid solution ? explain the hume rothery
rules goverining substitutional solid solution .Draw
isomorphous phase diagram.
Dec. 2012
4.a) Explain equilibrium cooling of a solid solution
alloy and showing the microstructureat various
points during solidificatIon.
(b) Describe with the aid of a diagram the
substitutional and interstitial solid solution
Isomorphous, eutectic, eutectoid, peritectic
May 2013, May 2012,Dec. 2013, Dec. 2011, May
2011.
5. Explain with a phase diagram of
May (2010),
(a) eutectic reaction(Partially soluble type).
2. What is isomorphous? May (2010),
(b)Eutectoid ,(c)peritectic reaction.
3. How is plain carbon steels classified? Define an
Classification of steel and cast Iron
alloy? DEC (2010)
Dec. 2009
6. Explain the various micro constituents resents in
4. Classify the alloys. DEC (2010)
steel
5. What are solid solutions? Dec. 2011
7. With a neat sketch, label the reactions of iron
6. Differentiate substitutional and interstitial solid
carbon diaogram
solutions with examples. Dec. 2011
8. Draw the iron carbn diagram and explain in brief.
7. What are intermediate phases?
8. Define the term phase.
May 2010
9. Draw Iron-carbon equilibrium diagram and label
9. What is an equilibrium phase diagram?
all the phases. Also enumerate the
10. Define eutectic reactions?
properties of the following phase. i) Ferrite ii)
11. Define peritectic reactions? May 2012
Austenite iii) Cementite
12. Define eutectoid reactions? May 2012
13. Define peritectoid reactions?
Dec. 2010
10. Draw Fe-Fe3C phase diagram and label all the
14. Distinguish eutectic and eutectoid
phases. Discuss the structural
transformations. May 2013
transformation while cooling from liquid to solid.
15. Distinguish peritectic and peritectoid
11.What is allotropy ? with neat sketch explain the
transformations. May 2013
allotropic forms of iron.
16. What are the uses of grey cast iron?
12. Fe3C phase diagram and label all the phases
17. What are chilled cast irons? May 2014
18. Why nodular cast iron is called ductile cast
13 Indicate the different invariant reactions in Feiron? May 2014
Fe3 -C phase diagram and draw and
label all the phases.
19. What are the advantages of alloy steels over
May 2014
plain carbon steels?
14.With the help of the Fe-C equilibrium diagram
20. What is the effect of additions of chromium on
describe completely the changes that
0.5%
the characteristics of steel?
carbon steel from liquid state.
Part-B
UNIT-1
PART-B
Constitution of alloys Solid solutions
May (2010), May 2013, May (2010) Dec. 2012
1.Define the following terms
:
1) Solid solution (types)
(2010),
3. Define full annealing. DEC (2010)
4. Define heat treatment. DEC (2010)
5. What is martensite and for eutectoid steel in
what temperature range it is generally formed?
Dec. 2011
6. What is the purpose of spheroidising annealing?
Dec. 2011
7. Define normalizing.
8. What is the purpose of normalizing?
9. What are the factors affecting the hardening
process?
10. What is austempering process and what is the
microstructure produced after austempering?
11. What is martempering process and what is the
purpose of this treatment? May 2012
12. Distinguish between hardness and
hardenability. May 2012
13. Define carburizing.
14. What are the three methods of carburizing
commonly employed? May 2013
15. What is the purpose of flame hardening and
induction hardening of steel? May 2013
16. Name the four different methods used for
flame hardening.
17. what steels are commonly used for nitriding?
May 2014
18. What is the process of nitriding? May 2014
19. Define cyaniding.
20. What is the process of carbonitriding?
Unit-II
PART-B
Full annealing,
May 2012, May2013,May 2014
1. What is annealing? Discuss in details on
different types of annealing and corn pare
with normalizing.
2. What is tempering? Discuss the structural
transformation during tempering.
3. Distinguish between hardness and
hardenabiity? Describe the Jominy End Test in
details for determination of hardenabiity.
Isothermal transformation diagrams
Dec 2012
4. Explain the various step followed to determine
an isothermal-transformation diagrame and
draw I.T diagrame for eutectoid steel.
5. Explain the following forms :1) Tempering
2)Austempering 3) Martempering.
May2013,May 2014
6. Distinguish between annealing and
normalizing? Discuss different types Of
annealing processes and Normalizing
processes.
Dec 2013
7. Explain the I. T. diagram for a eutectoid IronCarbon alloy with superimposed coolingcurves.
Austempering, martempering
Dec. 2009
8. Explain in detail the following process i)
flame hardening ii)induction hardening
May 2010, Dec 2011
9. What is case hardening ? Explain the
following processes
i) Carburizing ii) Nitriding iii) cyaniding iv)
carbonitriding
Dec. 2010, May 2011
10. What is case hardening ? Discuss nitriding
process and its importance for industrial
applications. Differentiate surface chemical
treatment and surface thermal treatment.
11. Explain with the help sketch the procedure
involved in gas carburizing process and
changes taking place in physical properties.
May 2013
16. What is duralumin?
17. Give composition and applications of
duralumin? May 2014
18. List at least four types of brasses used. May
2014
19. List some bronze alloys.
20. How can you classify tool steels?
PART-B
Effect of alloying additions on steel
MAY 2010
v) TRIP steel
May 2014
10. What are the influences of alloying Al, Cr, Ni,
Mo, Si, Mn, V and Cu on steel? Explain
in brief
May2011, Dec 2013
11. Discuss any two copper base, any two
aluminium base alloys. Give at least one
appilcation
12. Discuss the steps and the mechanism of
precipitation hardening and bearing alloys for
each alloy.
13. Briefly explain the following with respect to
non-ferrous alloys
i) Machinability. ii) weldability iii) castability
14. Name different alloys of copper. Give its
composition, properties and uses.
Dec 2011
15. What are the properties of Aluminium? And
what is the effect of different types ofalloying
element such as Cu, iron magnesium,
manganese used with Aluminium and its
application ? Explain.
May2012
16. Discuss different types of copper alloys and
their properties and applications.
17. Write a short note on bearing alloys.
May2013
18. Name non ferrous materials for the following
articles.
Bush - Tin Bronze
Furnaces Heating element-Ni- Cr - Fe alloys
Type writer parts
Coins - Coinage bronzes
Griders for airship-LM11
Big end bearing-AL alloys
Filament of electric lamps
Turbine blades inconel X
19. Write short note on
Bearing metals, Brasses, Alpha Beta Brasses
(2010)
5. What is PVC? Dec. 2011
6. What is copolymerization? Dec. 2011
7. What is PMMA?
8. What is PET?
9. What is ABS?
10. What is PI?
11. What is PAI? May 2012
12. What is PPO? May 2012
13. What is PPS?
14. What is PEEK? May 2013
15. What is PTFE? May 2013
16. What is PA?
17. What is PP? May 2014
18. What are acrylics? Mention their application.
May 2014
19. Distinguish between hard and soft glasses.
20. How is alumina ceramics produced?
PART-B
Polymers
Dec. 2009
1. What is PMMA? Describe it in detail.
2. Explain in detail Engineering polymers
May 2010
3. ExpIa in the following terms with respect to
polymers
) Mechanical behaviour ii) Thermal behaviour
iii) Electrical behaviour
4. What are the special properties of plastics that
make them suitable for engineering
applications?
1.
2.
2. What is creep?
MAY-2010
3. Define slip.
4. Name different types of facture.
5. What properties are determined from tensile
testing of metallic products? Dec. 2011
6. Distinguish between resilience and toughness.
Dec. 2011
7. Draw typical engineering stress strain curves
for the following materials: (a) Aluminum (b)
Mild steel (c) Cast iron (d) Polymer
8. What do you mean by double shear test?
9. Define the hardness of a material.
10. State the advantage and limitation of Rockwell
hardness test over the Brinell and Vickers
hardness test.
11. Differentiate between Charpy and Izod test
results not useful in design? May 2012
12. What is fatigue test S-N curve? May 2012
13. Define endurance limit in fatigue test.
14. Define fatigue strength in fatigue test. May
2013
May 2013
16. Differentiate between ductility and
malleability.
17. Define the terms brittleness and hardness.
May 2014
18. How can you prevent the brittle fracture?
May 2014
19. What is meant by creep fracture?
20. Sketch a creep curve explaining different
stages of it.
PART-B
Mechanisms of plastic deformation
DEC-2009 ,May -2011 , Dec-2011, May
-2013
DEC2013
10. Explain in brief the testing of materials to
measure tension and compression with a
graph and an example.
11. What is hardness test and impact test ?
Explain with a sketch and an example.
MAY 2014
12. Draw S-N curve for mild steeland aluminium
and explaIn its features Explain the
procedure used to obtain SN diagram
13. Explain briefly about Charpy impact test.