Академический Документы
Профессиональный Документы
Культура Документы
Scenario
Integrate OpManager with Cyberoam.
This document consists of the following sections:
1. Cyberoam Configuration
2. OpManager Configuration
Cyberoam Configuration
You must be logged on to the Web Admin Console as an administrator with Read-Write permission
for relevant feature(s).
Value
Description
Name
My_Cyberoam
Location
US
Contact Person
john.smith@cyberoam.com
Agent Port
161
Manager Port
162
Value
Description
Name
Public
IP Address
172.16.16.18
Protocol Version
v1,v2c - Enabled
Trap Support
v1,v2c - Enabled
OpManager Configuration
Follow the below mentioned steps to Integrate OpManager with Cyberoam.
address
bar
and
press
Enter.
Here
Here, <host_name> is the name of the machine in which OpManager is running and <port_number>
is the port that you have chosen to run OpManager Web Server during installation.
Type the User Name and Password and click Login. The default user name and password are
'admin' and 'admin' respectively.
Note:
Alternatively, if the OpManager server is running on Windows machines, you can start the Web client
using Start > Programs > ManageEngine OpManager > OpManager Web Client.
Enter the values for the SNMP Parameters and click Add as shown in the screen below.
Parameters
Value
Description
Credential Type
SNMP v1/v2
Name
Cyberoam_UTM
SNMP Read
SNMP_server
SNMP Write
SNMP_server
SNMP Port
161
SNMP Timeout
SNMP Retries
Parameters
Value
Description
Device Name / IP
address
192.168.44.132
Netmask
255.255.255.0
Credentials to use
Cyberoam_UTM
Once the device is added, it will show the device listed in its Inventory.
Once the services are selected it will be displayed in Monitors > Service Monitors section as shown
below: