Вы находитесь на странице: 1из 2

Mini Jet

directional drilling

T R E N C H L E S S

T E C H N O L O G Y

Description
In order to reduce raw material usage and all nuisances caused by the installation of networks, SADE (ISO 9001
and 14001 certified) has developed various environmental directional drilling methods. Amongst the equipment is
the Mini-Jet drill for crossing of roadways, railways, paved ways and areas as a trenchless technique.
The Mini-Jet drill consists of a compact directional drilling machine, a hydraulic unit (5-ton mini-excavator) and a
bentonite mixture injection unit. This drilling equipment is used for installing pipes (PE, steel, etc.) on lengths up to
50 m of diameters up to 200 mm.

Process

Advantages

Phase 1: pilot hole


Environment friendly
High
pressure injection of a fluid (bentonite) in the dril- Reduced disturbances and nuisances
ling head, equipped with a detectable probe to facilitate
completion deadlines
Reduced
the orientation
Reduced
of the inlet and outlet excavations
Significantdimensions
Drilling with rod train into ground
reduction of ground surface restoration require ments (more
than 80%)
Phase 2: reaming and installation of the pipe
Reduced
greenhouse
effect gas emissions (-70%)
Removal

of the drill head after drilling through to the

access pit
Reserve drilling with reaming head for required diameter (one or more reaming operations can be performed)
Hooking of the pipe to the end drilling rods
Pulling the pipe towards the access pit and by injecting
bentonite

Scopes of application

water, raw water


Drinking
Sewage
Telecommunications
Electricity
Gas
Remote distribution

28, rue de La Baume - 75008 Paris


Tl. : +33 (0)1 53 75 99 11 - Fax : +33 (0)1 53 75 99 02
www.sade-cgth.fr

Вам также может понравиться