Академический Документы
Профессиональный Документы
Культура Документы
2NO2
+ heat
a
shifts the equilibrium towards the formation of NO2
b
has no effect on the equilibrium
c
favors the backward reaction
12.
What force is required to punch a 20-mm diameter hole on a 10
mm thick plate if the ultimate shearing strength of the plate is 300
MPa?
a 188.5 kN
b 174.6 kN
c 192.5 kN
d 233.3 kN
13.
A certain ore is 4.5% by mass chalcocite. How many metric tons
of ore must pass through the flotation process to obtain 500 kg of
chalcocite?
a. 12.0 metric tons
c. 10.0 metric tons
b. 13.0 metric tons
d. 11.0 metric tons
14.
What is the angle in degrees between two initially perpendicular
lines contained inside a steel plate when the angular strain is 0.003
rad?
a 89.2 degrees
c 89.8 degrees
b 90.7 degrees
d 88.1 degrees
15.
How long will it take money to triple itself if invested at 8%
compounded annually?
a. 15 years
c. 13 years
b. 14 years
d. 12 years
16.
What is the concentration of ammonia which reacts with water to
produce ions to the extent of 5.0%? The Kb for NH3 at 25oC is 1.8 x 10-5
a. 2.50 x 10-3 M
c. 6.84 x 10-3 M
-4
b. 3.42 x 10 M
d. 1.71 x 10-5 M
17.
The pOH of a solution is 8.6. What is the concentration of
hydronium ions in the solution?
a. 4.0 x 10-6 M
b. 4.0 x 106 M
c. 2.5 x 109 M
d. 2.5 x 10-9 M
18.
Ca3(PO4)2(s) +
6NaCl(aq)
a. combination
c. decomposition
b. combustion
d. precipitation
19.
When limestone rock, which is principally CaCO 3, is heated,
carbon dioxide and quicklime, CaO, are produced by the reaction
CaCO3(s) CaO(s) + CO2(g). If 11.7 g of CO2 is produced from the
thermal decomposition of 30.7 g CaCO 3, what is the percentage yield
of the reaction? Atomic weight: Ca = 40.08; C = 12.01; O = 16.00)
a. 61.9%
c. 38.1%
b. 86.7%
d. 16.8%
20.
A 2.11 g sample of NaCl is placed into a 1500-ml volumetric
flask. The sample is dissolved and diluted to the mark on the flask
with water. What is the molar concentration of NaCl in the solution?
Atomic weights: Na = 22.98977; Cl = 35.45
a. 0.036 M
c. 3.6 x 10-5 M
b. 2.4 x 10-5 M
d. 0.024 M
21.
When 1.25 g of iron reacts with sulfur to form iron(II) sulfide, 2.24
kJ of heat is released. Calculate the enthalpy of the reaction Fe(s) +
S(s) FeS(s).
a. 100.1 kJ/mol
c. 0.05018 kJ mol
b. 1.792 kJ/g
d. 2.8 kJ g
22.
A process in which successive vaporizations and condensations
result in the separation of a mixture of volatile liquids is
a. sublimation
b. flotation
23.
a.
b.
c.
d.
a.
b.
c.
d.
Buoyant force is
Resultant of up-thrust and gravity forces acting on the body.
Resultant force on the body due to the fluid surrounding it.
Resultant of static weight of body and dynamic thrust of fluid.
Equal to the volume of liquid displaced by the body.
24.
25.
c. fractional distillation
d. evaporation