Академический Документы
Профессиональный Документы
Культура Документы
Catalogue
of Indonesia
Overseas Workers
2013
BNP2TKI
Catalogue
of Indonesia
Overseas Workers
2013
BNP2TKI
Foreword
Qualified, hardworking, loyal, friendly are
Indonesian workers.
The quality that quarantee high productivity
to any kind of business.
The purpose of making this Catalogue
is to provide anybody who involves
in overseas employment an adequate
information on the supply of professional
workers in Indonesia.
This Catalogue lists major occupations
from hospitality, health, construction,
oil/gas and Information Tecnology and
Manufacture sectors, completed with
competencies
attached
to
each
occupation.
List
of
schools/
training
centers
and
profession associations from where they
are educated/trained and affiliated are also
provided.
We do hope you may find the right
prospective workers. Please do not
hesitate to contact us or the institutions
listed at the end of this book.
Looking forward to having cooperation
with you for mutually benefit.
National Board
for the Placement and Protection
of Indonesian Overseas Workers
Page 1
INDONESIA
Indonesia is a republic country in Southeast
Asia with Jakarta as its capital city. Other
neighboring countries include Singapore,
Philippines, and Australia. Indonesia comprises 17,508 islands with a population of
around 230 million people. Across its many
islands, Indonesia has developed a shared
identity defined by a national language,
ethnic diversity, and religious pluralism. Bhinneka Tunggal Ika (Unity in Diversity) is
Indonesias national motto. The country is
richly endowed with natural resources.
Page 2
BNP2TKI
The National Board for the Placement and
Protection of Indonesian Overseas Workers
(known as BNP2TKI - Badan Nasional
Penempatan dan Perlindungan Tenaga Kerja Indonesia) is a government institution,
which mandated to optimize the benefit of
Indonesian
overseas employment programme .
The Board established in 2006 by Presidential
Regulation No. 81/ 2006. As stipulated by
Regulation, the main task of the Board is
to carry out the promotion, placement, and
protection of Indonesian overseas workers.
(Badan Nasional
Penempatan dan Perlindungan Tenga Kerja Indonesia)
2006
No. 81/2006
Page 3
Page 4
EXPLANATION:
LEVEL 1 (Senior High School/SMP)
Capable of performing simple, limited, routine
tasks, using established tools, rules, and processes, and under guidance, supervision, and
responsibility of their superiors. Having factual
knowledge.
Responsible for their own work and may not be
held accountable for others work.
Page 5
LEVEL 4 (Diploma-2/D-2)
Ability to complete extensive-scope tasks and
specific cases by analyzing information only,
selecting appropriate methods of standardized
multiple choices, and capable of showing performance with measurable quality and quantity.
Page 6
LEVEL 5 (Diploma-3/D-3)
Ability to complete extensive-scope tasks, selecting appropriate methods of standardized or
non-standardized multiple choices by analyzing
the data, and capable of demonstrating performance with measurable quality and quantity.
Mastering theoretical concepts of particular areas of knowledge in general, and capable of formulating procedural problem solving.
Ability to manage and organize work groups and
preparing a written report comprehensively.
Responsible for their own work and may be held
accountable for achievement of the groups
work.
LEVEL 6 (BACHELOR/DIPLOMA-4)
Ability to apply their expertise and utilize their
science and technology in the areas in problem
solving and capable of adapting to the situation
at hand.
Mastering theoretical concepts of particular areas of knowledge in general and theoretical concepts of in-depth particular parts in such areas
of knowledge, and capable of formulating procedural problem solving.
Page 7
Ability to take the right decisions based on analysis of information and data, and capable of providing guidance in selecting a variety of alternative solutions independently and in-group.
Responsible for their own work and may be held
accountable for achievement of the organizations work.
LEVEL 8 (MASTER)
Ability to develop knowledge, technology, and
or art within their scientific discipline or professional practice through research, to produce innovative and reliable works.
Ability to solve problems of science, technology, and or art within their scientific discipline
through inter- or multi-disciplinary approach.
Ability to manage research and development for
the benefit of society and science, and having
a capacity to be awarded national and international recognition.
Page 8
LEVEL 9 (DOCTORATE)
Ability to develop new knowledge, technology,
and or art within their scientific discipline or professional practice through research, to produce
creative, original, and reliable works.
Ability to solve problems of science, technology, and or art within their scientific discipline
through inter-, multi- or trans-disciplinary approach.
Ability to manage, lead, and develop research
and development for the benefit of science and
the benefit of mankind, and having a capacity to
be awarded national and international recognition.
Page 9
Page 10
Main Contents
01 Foreword
01
02 Indonesia
02
03 BNP2TKI
03
04 Indonesian Qualification
04
Framework
11 Main Contents
11
13
49 Health Care
49
59 Construction
59
91
129
159 Manufaktur
159
196
198
200
202
204 Contact - IT
204
206
Page 11
Indonesian workers of tourism are well known for their readiness to serve international
community. Many of them work in famous international hotel such as The Grand Hyatt, Hilton,
The Mandarin, Holiday Inn, Accord Group, Crown, Club-Med, Sheraton, JW Marriot, Ritz Carlton, Inter-Continental Hotel and luxury cruises. So far, our hospitality and tourism workforce
have been sent to various countries such as, The United Arab Emirates, Qatar, Singapore, Malaysia, India, Maldive, Macau, USA and Canada, France, Italy, Netherland, and Greece.
Contents
31
Reservation
14
Director
32
Telephone Operator
15
Outlet Manager
33
Cashier
16
Head Waiter
34
Bell Boy
17
Bartender
35
Greeter
18
Waiter
19
Waitress
Housekeeping
36
Manager
Facility
37
Supervisor
Spa Therapist
38
Floor Supervisor
39
Room Attendant
Food Production
40
Laundry Manager
21
Baker
41
Laundry Attendant
22
Butcher
42
23
Chef de Partie
24
Commis Chef
25
Commis Pastry
43
Tour Manager
26
Demi Chef
44
27
Executive Chef
45
Document Staff
46
Reservation Staff
20
Front Office
28
Manager
29
Supervisor
30
Receptionist
Page 13
Professional Competencies
Able to manage physical asset and infrastructure, prepare
and monitor operational budget, develop a marketing
strategy and coordinate sales activities, lead and manage
people, gather and present product information, read and
write in English at an advanced level.
Personal Qualities
Neat, polite, friendly, hygienist, good looking.
F&B Director
Page 14
Professional Competencies
Able to manage stock purchases and inventories, prepare
routine financial statements, recruit and select staff, monitor staff
performance standards, use oral English to convey a complex exchange of ideas, read and write in English at an advanced level.
Personal Qualities
Neat, polite, friendly, hygienist, good looking.
F&B Outlet
Manager
Page 15
Professional Competencies
Able to establish and maintain a safe working environment,
provide gueridon service, start conversations and develop
good relations with guests.
Personal Qualities
Neat, polite, friendly, hygienist, good looking.
guerdon
Food & BEVERAGE
Head Waiter
Page 16
Professional Competencies
Able to make and prepare cocktail, mocktail and juggling, clean
and tidy bar area, operated a bar facility, operate a cellar system,
serve a range of wine products.
Personal Qualities
Neat, polite, friendly, hygienist, good looking.
BarTender
Page 17
Professional Competencies
Able to provide advice to patrons on food and beverage
services, take food order and provide courteous table service,
clean and tidy service areas, provide room service
Personal Qualities
Neat, polite, friendly, hygienist, good looking.
Waiter
Page 18
Professional Competencies
Able to provide advice to patrons on food and beverage
services, take food order and provide courteous table service,
clean and tidy service areas, provide room service
Personal Qualities
Neat, polite, friendly, hygienist, good looking.
WaitrESS
Page 19
Professional Competencies
Able to help customer to become relax by giving techniques &
variety of massages, prepare the room for guest; assist them to
their designated rooms, prepare clients toiletries, oils and lotion
and other necessity for aroma therapy, advising the customer
suitable massages according to what they want.
Personal Qualities
Excellent communication and listening skills, perform good
customer service
Facility
Spa Therapist
Page 20
Professional Competencies
Able to prepare and Produce Yeast Goods, prepare bakery
products for patisserie
Personal Qualities
Neat, polite, friendly, hygienist, good looking
Food Production
Baker
Page 21
Professional Competencies
Able to Identify and prepare various meats, prepare portion and
controlled meat cuts
Personal Qualities
Neat, polite, friendly, hygienist, good looking
Food Production
Butcher
Page 22
Professional Competencies
Able to manage stock purchases and inventories, monitor staff
performance standards, monitor, control and order new stock,
prepare and display petits fours, sugar work, prepare and
present chocolate goods, dessert, prepare and produce cakes,
pastries, yeast goods, bakery products for patisserie
Personal Qualities
Neat, polite, friendly, hygienist, good looking
Food Production
Chef de Partie
Page 23
Professional Competencies
Able to monitor routine workplace operations, identify and
prepare various meats, maintain strategies for safe storages
of prepared foods, prepare soups, prepare and cook seafood,
prepare hot and cold dessert dishes
Personal Qualities
Neat, polite, friendly, hygienist, good looking
Food Production
Commis Chef
Page 24
Professional Competencies
Able to prepare and display petits fours, sugar work, prepare and
model marzipan, prepare and present desserts, gateaux, torten
and cakes, prepare and produce cakes and pastries
Personal Qualities
Neat, polite, friendly, hygienist, good looking
Food Production
torten gateaux
Commis Pastry
Page 25
Professional Competencies
Able to establish and maintain quality control in food
productions, monitor, control and order new stock, monitor
routine workplace operations, maintain strategies for safe
storage of prepared foods, plan, prepare and display a
buffet service, prepare soup, prepare and cook poultry and game
meats, prepare appetizer and salad, coach other in job skill
Personal Qualities
Neat, polite, friendly, hygienist, good looking
Food Production
Demi Chef
Page 26
Professional Competencies
Able to design menus and meals to meet specific market
requirement and specific dietary or cultural need, establish and
maintain quality control in food productions, recruit and select
staff, monitor staff performance standards, use oral English to
convey a complex exchange of ideas, read and write in English
at an advanced level
Personal Qualities
Neat, polite, friendly, hygienist, good looking
Food Production
Executive Chef
Page 27
Professional Competencies
Able to establish and maintain a safe and secure workplace,
manage the effective use of human resources, quality
customer/guest services, financial performance within a budget,
stock purchases and inventories, legal requirements for business
compliance, monitor and evaluate the effectiveness of training
outcomes, plan and establish systems and procedures, plan and
conduct an evacuation of premises.
Personal Qualities
Friendly, strong attention to detail, leadership skills, courteous to
guests, strong & good communication skills, neat, and polite
Front Office
FO Manager
Page 28
Professional Competencies
Able to provide accommodation services, maintain a paperbased filing and retrieval system, guest financial records,
financial standards and records, receive and process reservation
system, process a financial transaction for services rendered,
transactions for purchase of goods or services, monitor routine
workplace operations, conduct a night audit.
Personal Qualities
Friendly, strong attention to detail, leadership skills, courteous to
guests, good communication skills, neat, and polite
Front Office
FO Supervisor
Page 29
Professional Competencies
Able to provide accommodation services, receives and process
reservations, process a financial transaction for services rendered,
maintain a paper based filling and retrieval system, guests
financial records, prepare routine financial statements
Personal Qualities
Friendly, strong attention to detail, leadership skills, work quickly
and efficiently, must be courteous to guests, good communication
skills, neat, polite, good looking
Front Office
Receptionist
Page 30
Professional Competencies
Able to receive and process reservations, handling room key to
the customers, informing them the scope of their reservations
including meal, activity and other endeavors, making restaurant,
parking slot, activity reservations for the guests, confirming
reservations for the guests, recording the occupied and available
rooms in the computer files
Personal Qualities
pleasing personality, know how to communicate with different
customers
Front Office
Reservation
OFFICER
Page 31
Professional Competencies
Able to operate a (PABX) switchboard, receive and place
in-coming phone calls, facilitate out-going phone calls, provide
information about in-house services, international (IDD) service
information.
Personal Qualities
Friendly, strong attention to detail, leadership skills, work quickly
and efficiently, must be courteous to guests, good communication
skills, neat, polite, good looking
(PABX)
Front Office
Telephone
Operator
Page 32
(IDD)
Professional Competencies
Able to process financial transactions, maintain financial records,
financial manage within budget
Personal Qualities
Friendly, strong attention to detail, leadership skills, work quickly
and efficiently, must be courteous to guests, must have good
communication skills, neat, polite, good looking
Front Office
Cashier
Page 33
Professional Competencies
Able to provide bell boy/porter service, a lost and found facility,
escort, carry and store valuable items
Personal Qualities
Friendly, work quickly and efficiently, must be courteous to
guests, must have good communication skills, neat, polite,
good looking
Front Office
Bell Boy
Page 34
Professional Competencies
Able to greet and register guests, provide porter services, able to
coordinate with the concierge in hotel
Personal Qualities
Friendly, neat, polite, good looking
Front Office
Greeter
Page 35
Professional Competencies
Able to manage physical assets and infrastructure,
prepare, manage and monitor operational budgets,
manage stock purchases and infrastructure, recruit and select
staff, monitor and evaluate the effectiveness of training
outcomes, acces and retrieve computer-based data, start
conversations and develop good relations with guest
Personal Qualities
Friendly, strong attention to detail, leadership skills, courteous to
guests, must have good communication skills
House Keeping
Executive/
Housekeeper
Manager
Page 36
Professional Competencies
Able to establish and maintain a safe and secure workplace,
manage, monitor and control quality customer/guest services,
workplace relations, operations and diversity, roster staff, conduct
a staff performance standards and assessment process.
Personal Qualities
Friendly, strong attention to detail, leadership skills, work quickly
and efficiently, must be courteous to guests, must have good
communication skills
House Keeping
Supervisor
Page 37
Professional Competencies
Able to receive and securely store in-coming goods, deliver
training sessions, coach others in job skills, conduct training for a
small group, perform basic first aid procedures.
Personal Qualities
Friendly, strong attention to detail, leadership skills, work quickly
and efficiently, must be courteous to guests, must have good
communication skills
House Keeping
Floor
Supervisor
Page 38
Professional Competencies
Able to provide housekeeping services to guests, clean and
prepare rooms for incoming guests, provide a lost and found
facility, develop and update local knowledge.
Personal Qualities
Friendly, strong attention to detail, leadership skills, work quickly
and efficiently, must be courteous to guests, must have good
communication skills
House Keeping
Room
Attendant
Page 39
Professional Competencies
Able to establish and maintain a safe and secure workplace,
manage quality customer/guest services, stock purchases and
inventories, legal requirements for business compliance, prepare
and monitor operational budgets.
Personal Qualities
Friendly, strong attention to detail, leadership skills, work quickly
and efficiently, must be courteous to guests, must have good
communication skills
House Keeping
Laundry
Manager
Page 40
Professional Competencies
Are able to wash and to the the dry cleaning, collect dirty
clothes, beddings and prepare for washing, separate the colored
from white ones, put marks or place in each containers according
to owners to avoid misplacements, iron and fold dried clothes
and deploy to the designated rooms or areas, assist customers
with their laundry problem, clean and maintain industrial work
area and equipment, provide a lost and found facility.
Personal Qualities
Neat, polite, friendly, hygienic,hard working
House Keeping
Laundry
Attendant
5-2
Page 41
Professional Competencies
Able to provide housekeeping service to guest, clean public
areas, facilities and equipment, provide a lost and found facility,
clean and maintain industrial work and equipment
Personal Qualities
Neat, polite, friendly, hygienic,hard working
House Keeping
Public Area
Cleaner
Page 42
Professional Competencies
Able to manage tour both inbound and outbound, manage the
operation of tours and travel agency and airlines
Personal Qualities
Friendly, strong attention to detail, leadership skills, work quickly
and efficiently, must be courteous to guests, must have good
communication skills, neat, polite, good looking
Tour Manager
(S1)
Page 43
Professional Competencies
Able to lead, inform and manage a group of tourist both inbound
and outbound
Personal Qualities
Friendly, leadership skills, work quickly and efficiently, must be
courteous to guests, must have good communication skills, neat,
polite, good looking
Tour Guide/
Tour Leader
(S1)
Page 44
Professional Competencies
Able to handle the administration of outbound; implement administrative procedures; collect and present information; prepare
plan and manage business documents and meetings; receive
and store goods; supervise and order goods; plan and establish
systems and procedures, manage and evaluate projects.
Personal Qualities
Friendly, strong attention to detail, leadership skills, work quickly
and efficiently, must be courteous to guests, must have good
communication skills, neat, polite, good looking, accurate
Document
Staff
Page 45
Professional Competencies
Able to prepare the administration of tour, handle reservation
tour of taylor made tour and ready made tour, operate
reservation computer system.
Personal Qualities
Friendly, strong attention to detail, leadership skills, work quickly
and efficiently, must be courteous to guests, must have good
communication skills, neat, polite, good looking.
Reservation
Staff
Page 46
Page 47
Indonesian workers of health care are well known for their friendliness apart from their
professional quality. They provide excellent services upon infant and children, elder people,
as well as handicap people. They come with various qualifications, from diploma to master
degree with intensive training. So far, our health care workforce have been sent to various
countries such as, Singapore, Malaysia, Japan, Australia, New Zealand, The United Arab Emirates, Qatar, Kuwait, Canada, France, Netherland, German and United Kingdom.
Contents
Health Care
50
Baby Sitter
51
52
Dietician
53
Midwives
54
Rontgen Operator
55
Professional Nurse
56
Vocational Nurse
Page 49
HEALTH CARE
Professional Competencies
Able to know the basic understanding of the stages of childs developmentand behaviour, the basic understanding of needednutrition, basic techniques of feeding, dressing, diapering,
bathing, and playing with younger & older children, and how
to act in an emergency.
Personal Qualities
mature, honest, patience, naturally love children, love to
teach, hardworking, loyal, care, hygienist
BABY SITTER
Page 50
Professional Competencies
Able to know the basic understanding of the stages of aged
peoples development and behaviour, the basic understanding
of needed nutrition, the basic techniques of feeding, dressing,
diapering, bathing, and accompanying aged people and how
to act in an emergency.
Personal Qualities
mature, honest, patience, naturally love aged people, love to
teach, hardworking, loyal, care, hygienist
CARE GIVER/
ELDERLY SITTER
Page 51
HEALTH CARE
Professional Competencies
Able to plan food and nutrition programs, and supervise the
preparation and serving of meals; help prevent and treat
illnesses by promoting healthy eating habits and suggesting diet
modifications;promote sound eating habits through education,
and conduct research.
Personal Qualities
neat, hygienist, mature, patience, helpful, friendly, handy,
hardworking, loyal, care
DIETICIAN
Page 52
Professional Competencies
Able to provide advice, care and support for women, their
partners and families before, during and after childbirth; help
women make their own decisions about the care and services they access; personally responsible for the health of both
mother and child; provide health education and
parenting support.
Personal Qualities
neat, hygienist, mature, patience, helpful, friendly, handy,
hardworking, loyal, care
MIDWIVES
Page 53
HEALTH CARE
Professional Competencies
Able to provide advice, care and support for physical
examination, collect data from clients, wound care, decision
in nursing diagnosis, nursing intervention, nursing process
evaluation, emergency nursing, nosokomial infection
prevention, health education for client and family
Personal Qualities
neat, hygienist, mature, patience, helpful, friendly, handy,
hardworking, loyal, care
PROFESSIONAL
NURSE
Page 54
nosokomial
Professional Competencies
Able to perform diagnostic imaging examination as
physicians order, prepare patients for examinations by explaining the procedures, removing jewelry and other articles,
and positioning patients, so that the part of the body can be
appropriately radiographed, keep and adjust patient record
and maintain equipment.
Personal Qualities
neat, hygienist, mature, patience, helpful, friendly, handy,
hardworking, loyal, care
Rontgen
Operator
Page 55
HEALTH CARE
Professional Competencies
Able to observe patients physical (weight, height,
temperatures, pulse, respiration, and blood pressure); help
patients get in/ out of bed , walk, eat, dress, bathe, pee on bed,
apply compress, serve meals, answer patients need, escort
patients to operating and examining rooms; maintain
medicines intake, set up sterilled equipment
Personal Qualities
neat, hygienist, mature, patience, helpful, friendly, handy,
hardworking, loyal, care
VOCATIONAL
NURSE
Page 56
Page 57
Indonesian workers of construction are well known for their technical expertise,hard-working,
high work ethic, discipline, dedication, loyaliness, and friendliness.
Their lack of problems they bring to the workplace make Indonesian workers sought after by
foreigner employers. So far, our construction workforce have been sent to various countries
such as, The United Arab Emirates, Libya, Aljazair, Singapore, Malaysia, and Brunei Darussalam
Contents
Construction
Architecture
Mechanical
60
Building Construction
76 Arc Welder
61
Carpenter Foreman
62
63
79 Bulldozer Operator
80 Excavator Operator
Civil
81 Forklift Operator
64
BridgeConstructionEngineer
65
66
67
68
69
70
71
72
73
Electrical
74
75
Electrical Technician
Page 59
CONSTRUCTION
Professional Competencies
Able to direct building operation by coordinating, directing,
supervising,andresponsibleforbuildingoperation,preservation,
and maintenance activities based in work contract agreement,
system and operational procedure, laws in building construction,
and companys policies.
Personal Qualities
Fluent in English (written and oral), creative, innovative,
communicative and having a leadership skill, honest and
trustworthy.
Architecture
BUILDING
CONSTRUCTION
ENGINEER
Page 60
Professional Competencies
Able to execute construction work of wood double roof (easel),
cushion,windowanddoor,includingplafond,woodwallandfloor
according to job picture/ detail drawing.
Personal Qualities
Strength, attention to detail, ability to work with others,
hardworking, handy/agile.
Architecture
CARPENTER
FOREMAN
Page 61
CONSTRUCTION
Professional Competencies
Able to carry out building construction, concrete foundry, brick
intalling of office, apartment, segment house, hotel and factory,
and other construction works such as damaged electric knob, etc.
also able to build partition walls as well as to repair minor or
significant damages using simple equipment.
Personal Qualities
Fluent in English (written and oral), creative, innovative,
communicative and having a leadership skill, honest and
trustworthy.
Architecture
GENERAL
BUILDING
WORKER
Page 62
Professional Competencies
Able to manage construction work of stone, multiply and brick,
plaster, broadcast according to job picture/ detail drawing
Personal Qualities
Strength, attention to detail, ability to work with others,
hardworking, handy/agile.
Architecture
STONE MASON
FOREMAN
Page 63
CONSTRUCTION
Professional Competencies
Able to carry out all activities, give direction to technicians,
foremen and workers in implementing stages of bridge
construction works activities based on implementation method,
technical drawings and specifications.
Personal Qualities
Fluent in English (written and oral), creative, innovative,
communicative and having a leadership skill, honest and
trustworthy.
CIVIL
BRIDGE
CONSTRUCTION
ENGINEER
Page 64
Professional Competencies
Able to preparing work draft based on sketch and specification
done by the architect or technician, preparing detailed work plan
and drawing based on sketch and specification done by the civil
engineer, examining the sketch done by the technician, calculate
plan adjustment; prepare implementation and drawing details
accuracy.
Personal Qualities
attention to detail, ability to work with others, desire to think
creatively, capabilities of overcoming problems with innovative
solutions, hardworking, handy/agile
CIVIL
CIVIL
ENGINEERING
DRAFTSMAN
Page 65
CONSTRUCTION
Professional Competencies
Able to interpret construction drawings and specifications; prepare
quantity take-offs; prepare estimates for the project, monitor
and record project costs and schedule application charts to track
cost; maintain change order records; help analyze tenders and
auctions as well as the process of determining the winner;
assist in planning, making graphics, making work schedules,
and projected cost of activity.
Personal Qualities
Attention to detail, capabilities of overcoming problems with
innovative solutions, hardworking, handy/agile
CIVIL
COST
ESTIMATOR
ENGINEER
Page 66
Professional Competencies
Able to carry out dam construction based on drawings, Contract
Quality Plan (RMK) and contract documents.
Personal Qualities
Attention to detail, ability to work with others, desire to think
creatively, capabilities of overcoming problems with innovative
solutions, hardworking, handy/agile
CIVIL
DAM
CONSTRUCTION
ENGINEER
Page 67
CONSTRUCTION
Professional Competencies
Able to carry out measuring, data processing, and data
presenting in the form of situation map in certain scale,
and staking out based on the work drawing as well as work
implementation monitoring.
Personal Qualities
Strength, attention to detail, ability to work with others,
hardworking, handy/agile.
CIVIL
Page 68
Professional Competencies
Able to carry out hot asphalt work in the areas that cant be
reached by asphalt pavers, final tidying after coating by asphalt
pavers, as well as road maintenance.
Personal Qualities
Attention to detail, capabilities of overcoming problems with
innovative solutions, hardworking.
CIVIL
Road Asphalt
Worker
Page 69
CONSTRUCTION
Professional Competencies
Able to carry out all activities, give direction to technicians, foremen, and workers in implementing stages of road construction
of works activities based on implementation method, technical
drawings, and specifications.
Personal Qualities
Attention to detail, capabilities of overcoming problems with
innovative solutions, hardworking, handy/agile..
CIVIL
Road
Construction
Engineer
Page 70
Professional Competencies
Able to carry out road pavement works comprising foundation
layers as well as surface layers works.
Personal Qualities
Strength, attention to detail, ability to work with others,
hardworking, handy/agile.
CIVIL
Road
PAVEMENT
Worker
Page 71
CONSTRUCTION
Professional Competencies
Able to repairing, coordinating, and check concrete restating work.
Personal Qualities
Strength, attention to detail, ability to work with others,
hardworking, handy/agile.
CIVIL
STEEL RODS
WORKERS
Page 72
Professional Competencies
Able to direct technicians, foremen, and workers in tunnel
construction works based on work methods, drawings, and
technical specification.
Personal Qualities
Strength, attention to detail, ability to work with others,
hardworking, handy/agile.
CIVIL
TUNNEL
CONSTRUCTION
ENGINEER
Page 73
CONSTRUCTION
Professional Competencies
Able to repair electric installation; maintain and repair electrical
circuitry; oil circuit switcher and breaker, recloser voltage regulator, load break switch and capacity bank at the petroleum well
and industry sites, cleaning and take care of transformer guard
houses, ring bus, substation, switching station, install grounding
system and safety.
Personal Qualities
Attention to detail, ability to work with others, creative, ability to
overcome problems with innovative solutions, hardworking.
Electrical
ELECTRICAL
CIRCUITRY
INSTALLER
Page 74
Professional Competencies
Able to install, repair, operate and maintain the electronic
equipment and system.
Personal Qualities
Attention to detail, ability to overcome problems with
innovative solutions, hardworking, handy/agile.
Electrical
Electrical
Technician
Page 75
CONSTRUCTION
Professional Competencies
Able to weld parts using hand tool that release heat of arc
place objects to be weld on position, prepare the surface that
need to be weld, lining electrode as long as weld line to put
metal and electrode and melt together with worked object.
Personal Qualities
Strength, attention to detail, ability to work with others,
creative, ability to overcome problems with innovative
solutions, hardworking, handy/agile.
Mechanical
Arc Welder
Page 76
Professional Competencies
Able to operate asphalt mixer machine in the plant operation to
produce hot mix asphalt.
Personal Qualities
Strength, ability to work with others, hardworking
Mechanical
Asphalt
Mixing PlanT
Operator
Page 77
CONSTRUCTION
Professional Competencies
Able to operate Bitumen Sprayer Machine to produce asphalt
layer with certain thickness at determine work area.
Personal Qualities
Strength, ability to work with others, hardworking
Mechanical
Bitumen
Sprayer
Operator
Page 78
Professional Competencies
Able to operate bulldozer correctly and safely, carry out daily
maintenance based on maintenance guidelines and submit
operation progress report.
Personal Qualities
Strength, attention to detail, ability to work with others,
hardworking, handy/agile.
Mechanical
Bulldozer
Operator
Page 79
CONSTRUCTION
Professional Competencies
Able to operate excavator correctly and safely, carry out daily
maintenance based on maintenance guidelines and submit
operation progress report.
Personal Qualities
Strength, attention to detail, ability to work with others,
hardworking, handy/agile.
Mechanical
Excavator
Operator
Page 80
Professional Competencies
Able to operate Forklift correctly and safely, execute daily
maintenance according to the maintenance guidance and
make a report.
Personal Qualities
Strength, attention to detail, ability to work with others,
hardworking, handy/agile.
Mechanical
Forklift
Operator
Page 81
CONSTRUCTION
Professional Competencies
Able to execute daily maintainance, analyze damage and repait the heavy equipment according to the guidance.
Personal Qualities
Strength, attention to detail, ability to work with others,
hardworking, handy/agile.
Mechanical
Heavy
Equipment
Mechanics
Page 82
Professional Competencies
Skillful and competent in industrial tasks related to industrial and
mechanical drafting and design, competent in using Mechanical
Desktop, Pro Engineering, Art CAM, and AutoCAD Software, etc.
Personal Qualities
Strength, attention to detail, ability to work with others,
creative, ability to overcome problems with innovative
solutions, hardworking, handy/agile.
Mechanical
Mechanical
DRafter &
Designer
Page 83
CONSTRUCTION
Professional Competencies
Able to carry out motor grader daily maintenance and operation
correctly and safely based on maintenance and operation guidelines
as well as submit operation and safety work reports.
Personal Qualities
Strength, attention to detail, ability to work with others,
creative, ability to overcome problems with innovative
solutions, hardworking, handy/agile.
Mechanical
Motor
Grader
Operator
Page 84
Professional Competencies
Able to operate tower crane correctly and safely, carry out daily
maintenance guidelines and submit progress reports.
Personal Qualities
Strength, attention to detail, ability to work with others,
creative, ability to overcome problems with innovative
solutions, hardworking, handy/agile.
Mechanical
Tower Crane
Operator
Page 85
CONSTRUCTION
Professional Competencies
Able to operate wheel crane correctly and safely, carry out daily
maintenance based on maintenance guidelines and submit
operation reports.
Personal Qualities
Strength, attention to detail, ability to work with others,
creative, ability to overcome problems with innovative
solutions, hardworking, handy/agile.
Mechanical
Wheel
CRANE
Operator
Page 86
Professional Competencies
Able to operate wheel loader correctly and safely, carry out daily
maintenance based on maintenance guidelines and submit
operation reports.
Personal Qualities
Strength, attention to detail, ability to work with others,
creative, ability to overcome problems with innovative
solutions, hardworking, handy/agile.
Mechanical
Wheel
Loader
Operator
Page 87
CONSTRUCTION
Professional Competencies
Able to operator wood machine correctly and safely, carry out
daily maintenance based on maintenance guidelines and submit
operation reports.
Personal Qualities
Strength, attention to detail, ability to work with others,
creative, ability to overcome problems with innovative
solutions, hardworking, handy/agile.
Mechanical
Wood
Machine
Operator
Page 88
Page 89
As one of the biggest oil and gas production countries, Indonesia is proudly introduce
the best workforce in oil and gas industry. Most of University offer programmes that closely meet
the industrial need and in obtaining recognition as an expert, they need to hold an Indonesian
National Work Competencies Standard Certification. Our construction workforce have been
sent to various countries such as, The United Arab Emirates, Kuwait, Qatar, Spain, Scandinavian
countries, Australia, USA, and Asian countries.
Contents
Chief Engineer
93
Civil Drafter
94
Civil Designer
95
Civil Engineer
96
Filing System
97
Electrical Designer
98
Electrical Drafter
99
Electrical Technician
100
Electrical Engineer
101
Engineering Manager
102
103
104
105
Instrument Technician
106
Mechanic
107
Mechanical Engineer
108
Pipe Fitter
109
Pipeline Designer
110
Pipeline Drafter
111
Pipeline Engineer
Page 91
Professional Competencies
Able to manage engineers in all disciplines, familiar with
Engineering Plant Design.
Personal Qualities
Experiences more than 15 years in Engineering and Plant
Design, Strong management and Engineering Plant Design,
Professional and member of Indonesian Professional
Engineer Association.
Chief
Engineer
Page 92
Professional Competencies
Able and familiar with Civil Engineering Drafting and familiar
with Civil software drafting.
Personal Qualities
Experiences more than 5 years in Civil Engineering Drafting,
Civil drafting.
Civil
Drafter
Page 93
Professional Competencies
Able and familiar with Civil Engineering and familiar with
Civil software.
Personal Qualities
Experiences more than 8 years in Civil Engineering, Civil
and drafting, Professional and member of Indonesian
Professional Engineer Association.
Civil
Designer
Page 94
Professional Competencies
Able and familiar with Civil Engineering and familiar with
Civil software.
Personal Qualities
Experiences more than 8 years in Civil Engineering, Civil
Technology and drafting, Professional and member of
Indonesian Professional Engineer Association.
Civil
Engineer
Page 95
Professional Competencies
Able and familiar with document control and project filing
system; Able and familiar with document control and filing
system work.
Personal Qualities
Experiences more than 5 years in project document control
and filing system
Document
Control and
Filing System
Page 96
Professional Competencies
Able and familiar with Electrical Engineering, able and
familiar with Electrical drafting
Personal Qualities
Experiences more than 8 years in Electrical Engineering,
Electrical Technology And Drafting and member of
Indonesian Professional Engineer Association.
Electrical
Designer
Page 97
Professional Competencies
Able and familiar with Electrical Engineering Drafting, able
and familiar with Electrical drafting
Personal Qualities
Experiences more than 5 years in Electrical Engineering
Drafting, Electrical Drafting.
Electrical
Drafter
Page 98
Professional Competencies
Familiar with Electrical Installation Drawing. Familiar to
install, to maintain and to set electrical devices.
Personal Qualities
Experiences more than 5 years in Electrical Technician.
Electrical
Technician
Page 99
Professional Competencies
Able and familiar with Electrical Engineering, able and
familiar with Electrical technology and drafting
Personal Qualities
Experiences more than 8 years in Electrical Engineering,
Electrical Technology And Drafting and member of
Indonesian Professional Engineer Association.
Electrical
Engineer
Page 100
Professional Competencies
Able to manage engineers in all disciplines, familiar with
Engineering Plant Design.
Personal Qualities
Experiences more than 10 years in Engineering and Plant
Design, Strong management and Engineering Plant Design,
Professional and member of Indonesian Professional
Engineer Association.
Engineering
Manager
Page 101
Professional Competencies
Familiar with Piping Engineering & Plant Design. Familiar
with instrument and control design and drawing (hoke up
drawing).
Personal Qualities
Experiences more than 8 years in Piping Engineering and
Plant Design, Instrument And Control Design.
Professional and member of Indonesian Professional
Engineer Association.
Instrument
& Control
Designer
Page 102
Professional Competencies
Familiar with Piping Engineering & Plant Design Instrument
and Control Drawing. Familiar with instrument and control
drawing.
Personal Qualities
Experiences more than 5 years in Piping Engineering and
Plant Design, Instrument And Control Drafting.
Instrument
& Control
Drafter
Page 103
Professional Competencies
Familiar with Piping Engineering & Plant Design. Familiar
with instrument and control system.
Personal Qualities
Experiences more than 8 years in Piping Engineering and
Plant Design, Instrument And Control System
Professional and member of Indonesian Professional
Engineer Association.
Instrument
& Control
Engineer
Page 104
Professional Competencies
Familiar with Instrument and Control Installation Drawing.
Familiar to install, to maintain and to set instrument
devices.
Personal Qualities
Experiences more than 5 years in Instrument And Control
Technician.
Instrument
TechniciaN
Page 105
Professional Competencies
Familiar with Mechanical Installation Drawing. Familiar to
install, to maintain and to set mechanical devices.
Personal Qualities
Experiences more than 5 years in Mechanic.
Mechanic
Page 106
Professional Competencies
Able and familiar with Piping Engineering and Plant Design,
able and familiar with Mechanical technology and drafting
Personal Qualities
Experiences more than 8 years in Piping Engineering and
Plant Design & Mechanical Technology And Drafting and
member of Indonesian Professional Engineer Association.
Mechanical
Engineer
Page 107
Professional Competencies
Able and familiar with piping construction Drawings and
familiar with pipe fitter calculation and measurement.
Personal Qualities
Experiences more than 5 years in Pipe Fitter Work onshore
or offshore.
Pipe Fitter
Technician
Page 108
Professional Competencies
Able and familiar with Pipeline Engineering, able and familiar
with pipeline design and pipeline element sheet.
Personal Qualities
Experiences more than 8 years in Pipeline Engineering,
Pipeline Design And Drafting and member of Indonesian
Professional Engineer Association. Familiar with pipeline
drawing software and min. Auto CAD or PDS or PDMS
Pipeline
Designer
Page 109
Professional Competencies
Able and familiar with Pipeline Engineering Drafting, able
and familiar with pipeline element sheet drawing.
Personal Qualities
Experiences more than 5 years in Pipeline Engineering
Drafting, Pipeline Design And Drafting. Familiar with pipeline
drawing software and min. Auto CAD or PDS or PDMS or
pipeline drafting software.
Pipeline
Drafter
Page 110
Professional Competencies
Able and familiar with onshore and offshore Pipeline
Engineering, able and familiar with pipeline technology and
drafting
Personal Qualities
Experiences more than 8 years in onshore and offshore
Pipeline Engineering, Pipeline Technology And Drafting and
member of Indonesian Professional Engineer Association.
Pipeline
Engineer
Page 111
Professional Competencies
Able and familiar with Pipeline Engineering Drawing, able
and familiar with pipeline design and pipeline element
sheet
Personal Qualities
Experiences more than 8 years in Pipeline Inspection,
Pipeline Design And Drafting and member of Indonesian
Professional Engineer Association.
Pipeline
Inspector
Page 112
Professional Competencies
Able and familiar with Piping Engineering and Plant Design,
able and familiar with piping design and drafting
Personal Qualities
Experiences more than 8 years in Piping Engineering and
Plant Design, Piping Design And Drafting and member of
Indonesian Professional Engineer Association. Familiar
with piping drawing software and min. Auto CAD or PDS or
PDMS
Piping
Designer
Page 113
Professional Competencies
Able and familiar with Piping Engineering and Plant Design
Drafting, able and familiar with piping drafting software.
Personal Qualities
Experiences more than 5 years in Piping Engineering and
Plant Design Drafting, Piping Drafting. Familiar with piping
drawing software and min. Auto CAD or PDS or PDMS
Piping
Drafter
Page 114
Professional Competencies
Able and familiar with Piping Engineering and Plant Design,
able and familiar with piping technology and drafting
Personal Qualities
Experiences more than 8 years in Piping Engineering and
Plant Design, Piping Technology And Drafting and member
of Indonesian Professional Engineer Association.
Piping
Engineer
Page 115
Professional Competencies
Able and familiar with Piping Engineering and Plant Design,
able and familiar with piping design and drafting and
inspection work.
Personal Qualities
Experiences more than 8 years in Piping Inspection, Piping
Design And Drafting and member of Indonesian Professional
Engineer Association.
Piping
Inspector
Page 116
Professional Competencies
Able and familiar with project planning and scheduling;
Able and familiar with planning and scheduling software
Personal Qualities
Experiences more than 8 years in project planning and
scheduling and familiar with planning and scheduling
software
Planning and
Scheduling
Page 117
Professional Competencies
Familiar with Process Engineering Plant Design. Software
like Hysis,
Personal Qualities
Experiences more than 5 years in Engineering and Plant
Design, Strong in process of Engineering Plant Design,
Professional and member of Indonesian Professional
Engineer Association.
Process
Engineer
Page 118
Professional Competencies
Able to manage procurement and buyers, familiar with
Procurement policy and procedure
Personal Qualities
Experiences more than 10 years in Procurement,
Strong management and procurement, Professional and
member of Indonesian Professional Engineer Association.
Procurement
Manager
Page 119
Professional Competencies
Able to manage engineering, procurement and construction,
familiar with Project Plants.
Personal Qualities
Experiences more than 10 years in EPC. Project Plant,
Strong management and Engineering, Procurement and
Construction Plants, Professional and member of Indonesian
Professional Engineer Association.
Project
Manager
Page 120
Professional Competencies
Able and familiar with QA/QC procedure and familiar with
QA/QC inspection and survey of materials and equipments.
Personal Qualities
Experiences more than 8 years in QA/QC for Engineering,
Procurement And Construction, Professional and member
of Indonesian Professional Engineer Association.
QA/QC Engineer
(Piping,
Instrument,
Electrical, Civil
Structure)
Page 121
Professional Competencies
Able and familiar with SHE policy & procedure
Personal Qualities
Experiences more than 8 years in SHE for Engineering,
Procurement And Construction, Professional and member
of Indonesian Professional Engineer Association.
SHE (Safety,
HealtH and
Environment)
Engineer
Page 122
Professional Competencies
Able and familiar with Structure Engineering and familiar
with structure software onshore and offshore work to
include pipe support.
Personal Qualities
Experiences more than 8 years in Structure Engineering,
Structure drafting, Professional and member of Indonesian
Professional Engineer Association.
Structure
Designer
Page 123
Professional Competencies
Able and familiar with Structure Engineering Drafting
and familiar with structure software drafting onshore and
offshore work to include pipe support.
Personal Qualities
Experiences more than 5 years in Structure Engineering
Drafting, Structure drafting.
Structure
Drafter
Page 124
Professional Competencies
Able and familiar with Structure Engineering and familiar
with structure software onshore and offshore work to
include pipe support.
Personal Qualities
Experiences more than 8 years in Structure Engineering,
Structure Technology and drafting, Professional and member
of Indonesian Professional Engineer Association.
Structure
Engineer
Page 125
Professional Competencies
Able and familiar with Welding Pipe, plat and plant
equipments.
Personal Qualities
Experiences more than 8 years in welding work for piping,
plate, beam and plant equipments.
Welder
GrADE 6
Page 126
Page 127
Indonesian workers of Information Technology are well known for their creativity, strong
visual sense and computer skills, confidence, attention to details, excellent teamworking,
disclipines and pleasant personality.
IT professionals perform in numerous functions, such as: installing applications to design
complex computer networks, information databases, data management, networking,
engineering computer hardware, database and software design; as well as executing
management and administration of entire systems. Information technology is starting
to expand beyond conventional personal computer and network technology, and other
technologies such as the use of cell phones, televisions, automobiles, and more, which is
increasing the demand for such jobs.
Contents
Information Technology
130
131
132
133
134
Computer Programmers
135
136
137
138
143
144
145
146
IT Enterpreneur
147
148
149
Program Analyst
150
R&D Engineer
151
Software Developer
152
System Analyst
153
System Engineer
154
155
Web Administrators
156
157
Web Developer
Systems Software
139
140
141
Computer Technician
(hardware and network)
142
Database Administrators
Page 129
INFORMATION TECHNOLOGY
Professional Competencies
Personal Qualities
Computer and
Information
Systems
Managers
Page 130
Professional Competencies
Personal Qualities
Computer
Graphic
Specialist
Page 131
INFORMATION TECHNOLOGY
Professional Competencies
Personal Qualities
Computer
Hardware
Engineers
Page 132
Professional Competencies
Personal Qualities
Computer
Network
Specialist
Page 133
INFORMATION TECHNOLOGY
Professional Competencies
Personal Qualities
Computer
Programmers
Page 134
Professional Competencies
Personal Qualities
Computer
Science
Teachers, PostSecondary
Page 135
INFORMATION TECHNOLOGY
Professional Competencies
Personal Qualities
Computer
Security
Specialists
Page 136
Professional Competencies
Personal Qualities
Computer
Software
Engineers,
Applications
Page 137
INFORMATION TECHNOLOGY
Professional Competencies
Personal Qualities
Computer
Software
Engineers,
Systems
Software
Page 138
Professional Competencies
Personal Qualities
Computer
Support
Specialists
Page 139
INFORMATION TECHNOLOGY
Professional Competencies
Personal Qualities
Computer
Systems
Analysts
Page 140
Professional Competencies
Personal Qualities
Computer
Technician
(hardware and
network)
Page 141
INFORMATION TECHNOLOGY
Professional Competencies
Personal Qualities
Database
ADministrators
Page 142
Professional Competencies
Personal Qualities
Database
Engineer &
Programmer
Page 143
INFORMATION TECHNOLOGY
Professional Competencies
Personal Qualities
Information
System Design
Page 144
Professional Competencies
Personal Qualities
Information
Technology
Project
Managers
Page 145
INFORMATION TECHNOLOGY
Professional Competencies
Personal Qualities
IT
Enterpreneur
Page 146
Professional Competencies
Personal Qualities
Network and
Computer
Systems
ADMInistrators
Page 147
INFORMATION TECHNOLOGY
Professional Competencies
Personal Qualities
Network
Systems
and Data
COMmunications
Analysts
Page 148
Professional Competencies
Personal Qualities
ProgramME
Analyst
Page 149
INFORMATION TECHNOLOGY
Professional Competencies
Personal Qualities
R&D Engineer
Page 150
Professional Competencies
Personal Qualities
Software
Developer
Page 151
INFORMATION TECHNOLOGY
Professional Competencies
Personal Qualities
System Analyst
Page 152
Professional Competencies
Personal Qualities
System
Engineer
Page 153
INFORMATION TECHNOLOGY
Professional Competencies
Personal Qualities
System
Support
Engineer
Page 154
Professional Competencies
Personal Qualities
Web
ADministrators
Page 155
INFORMATION TECHNOLOGY
Professional Competencies
Personal Qualities
Page 156
Professional Competencies
Personal Qualities
Web Developer
Page 157
Contents
Manufackture
160
3D Modeller Operator
178
Maintenance Supervisor
161
Automation Engineer
179
Mechanic Technician
162
Automotive Mechanics
180
163
164
165
CNC Programmer
166
167
168
Engineering (Spv)
181
Mechanical fluida
182
183
184
Motorcycle Electro-Mechanic
Technician
Technician
185
169
Electrical Mechanic
186
170
Electrical Welder
171
(PLC) Operator
187
188
189
190
Production Foreman
172
173
174
191
Production Managers
175
Machine Designer
192
Production Supervisor
176
193
Programmer Supervisor
194
195
Page 159
MANUFAcTURe
Professional Competencies
Personal Qualities
3D Modeller
OperatoR
Page 160
Professional Competencies
Personal Qualities
Automation
Engineer
Page 161
MANUFAcTURe
Professional Competencies
Personal Qualities
Automotive
Mechanics
Page 162
Professional Competencies
Personal Qualities
CAD Junior
Designer
Page 163
MANUFAcTURe
Professional Competencies
Personal Qualities
CNC
Maintenance
Technician
Page 164
Professional Competencies
Personal Qualities
CNC
Programmer
Page 165
MANUFAcTURe
Professional Competencies
Personal Qualities
Component
and Product
Designer
Page 166
Professional Competencies
Personal Qualities
Cosimir Robotic
Operator
Page 167
MANUFAcTURe
Professional Competencies
Personal Qualities
Electrical and
Mechanical
Car Engine
Technician
Page 168
Professional Competencies
Personal Qualities
Electrical
Mechanic
Page 169
MANUFAcTURe
Professional Competencies
Personal Qualities
Electrical
Welder
Page 170
Professional Competencies
Personal Qualities
Executing
Mechanics
(loading and
unloading
equipment)
Page 171
MANUFAcTURe
Professional Competencies
Personal Qualities
Gas Welding
Operator
Page 172
Professional Competencies
Personal Qualities
Hydraulic
Pneumatic
Operator
Page 173
MANUFAcTURe
Professional Competencies
Personal Qualities
Lathe Machine
OPERATOR
Page 174
Professional Competencies
Personal Qualities
Machine
Designer
Page 175
MANUFAcTURe
Professional Competencies
Personal Qualities
Machinery
and Tool
industrial
Designer /
Tools Maker
Page 176
Professional Competencies
Personal Qualities
Maintenance
Automotive
Foreman
Page 177
MANUFAcTURe
Professional Competencies
Personal Qualities
Maintenance
Supervisor
Page 178
Professional Competencies
Personal Qualities
Mechanic
Technician
Page 179
MANUFAcTURe
Professional Competencies
Personal Qualities
Mechanical
and
Electrical (ME)
Engineering
(Spv)
Page 180
Professional Competencies
Personal Qualities
Mechanical
fluida
Page 181
MANUFAcTURe
Professional Competencies
Personal Qualities
Milling CNC
(Computer
Numerical
Controller)
Operator
Page 182
Professional Competencies
Personal Qualities
Milling Manual
Operator
Page 183
MANUFAcTURe
Professional Competencies
Personal Qualities
Motorcycle
ElectroMechanic
Technician
Page 184
Professional Competencies
Personal Qualities
Plastic
Injection
Machine
Operator
Page 185
MANUFAcTURe
Professional Competencies
Personal Qualities
Programmable
Logic
Controlle (PLC)
Operator
Page 186
Professional Competencies
Personal Qualities
Press Machine
Operator
Page 187
MANUFAcTURe
Professional Competencies
Personal Qualities
Press Wheel
Operator
Page 188
Professional Competencies
Personal Qualities
Product and
Process Analyst
Page 189
MANUFAcTURe
Professional Competencies
Personal Qualities
Production
Foreman
Page 190
Professional Competencies
Personal Qualities
Production
Managers
Page 191
MANUFAcTURe
Professional Competencies
Personal Qualities
Production
Supervisor
Page 192
Professional Competencies
Personal Qualities
Programmer
Supervisor
Page 193
MANUFAcTURe
Professional Competencies
Personal Qualities
Scrub Manual
Operator
Page 194
Professional Competencies
Personal Qualities
Universal
Testing Machine
Operator
Page 195
Contacts
Page 196
Page 197
Contacts
Health Care
Jakarta III Health Polytechnic
Poltekkes Jakarta III
Jl. Hankam Arteri JORR Jatiwarna KM. 6,
Bekasi, Indonesia
Tel/ Fax: +62-21-84978696
Page 198
Page 199
Contacts
Construction
Electronics Engineering Polytechnic
Institute of Surabaya
Politeknik Elektronika Negeri Surabaya Institut
Teknologi Sepuluh Nopember Surabaya
Kampus PENS, Jl. Raya ITS, Keputihan,
Sukolilo, Surabaya, Indonesia, 60111
Tel: +62-31-5947280;
Fax: +62-31-5946114
Email: pens@eepis-its.edu
Website: www.eepis-its.edu;
www.eepis.ac.id; www.pens.ac.id
Center for Competency and Construction
Training Development
Ministry of Public Works
Pusat Pembinaan dan Pelatihan
Konstruksi, Pusbin KPK, Kementrian PU
Jl. Sapta Taruna Raya, Komplek PU
Pasar Jumat, South Jakarta, Indonesia
Tel: +62-21-7656532
Fax: +62-21-7511847
Email: pusbin_kpk@yahoo.com
Page 200
Page 201
Contacts
Page 202
Page 203
Contacts
Information Technology
Dian Nuswantoro University
Universitas Dian Nuswantoro
Jl. Nakula I No. 5-11 Semarang,
Central Java, Indonesia
Tel: +62-24-3517261
Fax: +62-24-3520165
Email: sekretariat@dinus.ac.id
Website: www.dinus.ac.id
Page 204
Gunadarma University
Universitas Gunadarma
Jl. Margonda Raya 100, Depok
Jawa Barat, Indonesia 16424
Tel: +62-21-7888-1112
Email: mediacenter@gunadarma.ac.id
Indonesian Computer University of Bandung
Universitas Komputer Indonesia (UNIKOM)
Bandung
Jl.Dipatiukur No.112, Bandung,
East Java, Indonesia
Tel: +62-22-2504119.
Fax: +62-22-2533754
Website: www.unikom.ac.id
Polytechnic LP3I of Bandung
Politeknik LP3I Bandung
Jl. Pahlawan No. 59 Bandung,
Indonesia 40123
Tel: +62-22-2506500
Fax: +62-22-2512564
Email : info@politeknik-lp3i-bandung.ac.id
Website : www.politeknik-lp3i-bandung.
ac.id
Polytechnic of Batam
Politeknik Batam
Parkway Street, Batam Centre, Batam,
Indonesia, 29461
Tel: +62-778-469856, 469860
Fax: +62-778-463620
Email: info@polibatam.ac.id
Website: www.polibatam.ac.id
STIMIK Banjarbaru
Sekolah Tinggi Manajemen Informatika dan
Komputer (STIMIK) Banjarbaru
Jl. Jend. Ahmad Yani Km. 33,5, Loktabat,
Banjarbaru, South Kalimantan, Indonesia
Tel: +62-511-4782881
Fax: +62-511-4782881
Website: new.stmik-banjarbaru.ac.id
STIMIK Bumigora
Sekolah Tinggi Manajemen Informatika dan
Komputer (STIMIK) Bumigora
Jl. Ismail Marzuki, Mataram,
NTB, Indonesia, 83121
Tel: +62-370-634498
Fax: +62-370-638369
Email: info@stimikbumigora.ac.id
Website: www.stimikbumigora.ac.id
Page 205
Contacts
Manufaktur
Institute Technology of Sepuluh November
Institut Teknologi Sepuluh November (ITS)
Kampus ITS Keputihan Sukolilo, Surabaya,
Indonesia, 60111
Tel: +62-31-5994251, 5947264
Fax: +62-31-5923465
Email: rektor@its.ac.id
Website: www.its.ac.id
Page 206
Page 207
Contacts
Manufaktur
Sains and Technology Institute
Institut Sains dan Teknologi AKPRIND
Jl Kalisahak No. 28 Yogyakarta,
Indonesia, 55222
Tel: +62-274-563029
Fax: +62-274-563847
Page 208
Tadulako University
Universitas Tadulako
Kampus Bumi Tadulako Tondo, Palu,
Indonesia, 94118
Tel: +62-451-422611
Fax: +62-451-422611
Email: info_master@untad.ac.id
Technical Academy for Manufacturing
of Surakarta
Akademi Teknik Mesin Industri (ATMI)
Surakarta
Jl. Mojo No. 1 Surakarta, Indonesia
Tel: +62-271-714466
Fax: +62-271-714390
Email: atmi@indo.net.id
Udayana University
Universitas Udayana
Kampus Bukit Jimbaran Badung, Bali,
Indonesia
Tel: +62-361-701954, 704845
Fax: +62-361-701907
Email: info@unud.ac.id
Website: www.unud.ac.id
University of Mataram
Universitas Mataram
Jl. Majapahit No. 62, Mataram, Indonesia
Tel: +62-370-631166, 633007
Fax: +62-370-636041
Page 209
Notes
Page 210
Notes
Page 211
BNP2TKI