Академический Документы
Профессиональный Документы
Культура Документы
M Series Monitor
CES
PROJECT
PHOTODIODE SENSOR
WITH MULTIPLE VOLTAGE OUTPUT
3 Wire, External Power, Multiple Voltage Output
LOCATION
FEATURES
Indoor
Sensor
Skylight
Sensor
Outdoor
Sensor
Atrium
Sensor
UL 916 Listed
NIST traceable factory calibration available
Title 24 Listed
RoHS compliant
2 year warranty
DESCRIPTION
The CES is a three wire, analog photosensor which
provides a light level input into lighting control and
building automation systems. The CES has four models
which are used in different locations in and around a
building. Indoor sensors are used in ofces and classrooms.
Outdoor sensors detect light for sign and site illumination
control. Atrium sensors measure light in lobbies. Skylight
sensors read the ambient light available in warehouse
skylights. Other sensors include a low range indoor
model for museum wall monitoring and a high range
outdoor sensor for daytime contrast lighting control.
Each sensor has a different range and focus of the light
being measured.
301_CES_R.1_7-8-10
A Division of PLCMultipoint
Input Voltage:
Power Consumption:
Low Output:
SEE TABLE 1
0 or 1VDC
High Output:
SEE TABLE 2
5 or 10VDC
Photodiode:
Blue Enhanced
Gain Adjustment:
Time Response
Tolerance:
25 Turn Potentiometer
Fixed 10 second Full Range
12%
+/- 0.5%
2%
+/- 10%
-40 to 140F (-40 to 60C)
Red: Input Voltage
Yellow: Signal Voltage
Black: Return
Repeatability
Linearity
Temperature
Temperature:
Wiring:
Compliance:
Minimum
0 Fc
0 Fc
0 Fc
0 Fc
0 Fc
0 Fc
TABLE 1
Maximum
50-750 Fc
50-750Fc
200-2,500Fc
1,000-7,500Fc
20-40Fc
500-7,500 Fc
TABLE 2
ONE-LINE DIAGRAM
Style
Lens
Filter
Mounting
Orientation
CES/I
CES/O
CES/A
CES/S
CES/IL
CES/OD
Indoor
Outdoor
Atrium
Skylight
Indoor
Outdoor
Fresnel
Flat
Dome
Dome
Fresnel
Flat
Clear
Clear
Opaque
Dark
Clear
Dark
Ceiling
1/2 NPT
1/2 NPT
1/2 NPT
Ceiling
1/2 NPT
Down
Horizontal
Horizontal
Up
Down
Horizontal
100 Fc
250 Fc
1,000 Fc
2,000 Fc
40 Fc
1,000 Fc
ORDERING INFORMATION
NOTE: Input voltage chosen must be equal to or greater then maximum output voltage. Maximum
voltage output is set at factory and is specied on the order. Consult factory for special calibrations.
-
Sensor Style
CES/I
CES/O
CES/A
CES/S
CES/IL
CES/OD
Voltage Input
5
10
12
24
301_CES_R.1_7-8-10
A Division of PLCMultipoint