Академический Документы
Профессиональный Документы
Культура Документы
C227879
C. C. C. SKIKDA
Page i
INDEX
1
GENERAL
REMARKS
1
2
ABBREVIATIONS
AND
SYMBOLS
1
3
COMPLIANCE
WITH
REGULATIONS
2
4
MECHANICAL
STANDARDS
3
5
ELECTRICAL
7
STANDARDS
AEC
C. C. C. SKIKDA
C227879
Rev. 0; January 2003
Page 1 of 9
GENERAL REMARKS
The standards, codes and regulations discussed in this section serve as the base for the technical realisation of the
systems and components as part of this offer.
GEs design standards incorporate appropiate features of industry codes and standards to the extent that they closely
approximate the conditions of the turbogenerator applications. The power island equipment is built to USA and
some international codes and standards as indicated in subsequent categories.
Balance of plant equipment will comply with the current revision of the standards indicated in this chapter.
ANSI
ASME
ASTM
AWS
DIN
HEI
ISA
ISO
MSS
NEMA
AEC
C. C. C. SKIKDA
C227879
Rev. 0; January 2003
NI
Norma de IBERDROLA
SIS
VDI
VDE
Page 2 of 9
All devices and equipment supplied, and all the work carried out, will be done in all regards in accordance with
Regulation and Official Bylaw
The Regulations and/or requirements that are applicable to the installation and the safety of the persons who work
with them, will be complied in all senses.
Special attention will be paid to compliance with the Algerian legislation in force regarding pressurised containers
under high temperatures. Projects will be drawn up and presented for the approval and all the equipments affected
thereby will be registered.
AEC
C. C. C. SKIKDA
C227879
Rev. 0; January 2003
Page 3 of 9
MECHANICAL STANDARDS
AGMA.
ANSI.
AGMA 6011-H97
ANSI A2.4
ANSI B1.1
ANSI B1.20.1
ANSI 16.5
ANSI B133.2
ANSI B133.3
ANSI B133.8
ANSI J184
ANSI S1.4
ANSI S1.13
ANSI Y14.5M
ANSI Y14.17
ANSI Y14.36
ANSI Y32.11
chemical industries.
ANSI Y32.2.3
AEC
C. C. C. SKIKDA
C227879
Rev. 0; January 2003
ASME.
Page 4 of 9
ASME, Sec. I
Power Boilers.
ASME, Sec. II
Material Specification.
Pressure Vessels.
ASME, Seccin IX
ASME PTC 4.4 Performance test code on gas turbine heat recovery steam generators.
ASME PTC 6
ASME-B 1.1
ASME-B 1.2
ASME-B16.1
ASME-B16.9
ASME-B 16.20 Ring joint gasketts and grodves for steel pipe flanges.
ASME- B-18
AEC
C. C. C. SKIKDA
C227879
Rev. 0; January 2003
Page 5 of 9
ASME-B 31.1
Power piping.
ASME-B.31.3
ASME-B 31.8
ASME-B 36.1
ASME-B 46.1
ASME BPVC, Sec. VIII, Div. 1 Boiler and pressure vessel code-Pressure vessel (for
Surface texture.
ASTM E 165
ASTM E 213
ASTM A 275
ASTM A 388
forgings.
ASTM A 609
ASTM E 709
ASTM A-193
ASTM A-194
ASTM A-307
ASTM A-320
AEC
C. C. C. SKIKDA
C227879
Rev. 0; January 2003
MSS.
Page 6 of 9
MSS- SP 6
Standards finishes for contact faces of pipe flanges and connecting end
MSS- SP 43
MSS- SP 44
MSS- SP 45
MSS- SP - 48
NFPA.
NFPA 70
NFPA 30
NFPA 497A
NFPA 8506.
HEI.
SIS.
SSPC-SP1
SSPC-SP2/ SIS/St2
SSPC-SP3/ SIS/St3
SSPC-SP5/ SIS/Sa3
SSPC-SP6/ SIS/Sa2
SSPC-SP7/SIS/Sa1
AEC
C227879
C. C. C. SKIKDA
Page 7 of 9
SSPC-SP8
ISO.
Descaling.
ISO 1940
ISO 2314
ISO 2548
Centrifugal mixed flow and axial pumps - Code for acceptance tests.
ISO 4628/1/2/3/4/5
ISO 7919
ISO 10816
Mechanical
vibration
Evaluation
of
machine
vibration
by
TEMA C
coolers)
VDI.
VDI 2056/2059
ELECTRICAL STANDARDS
ANSI.
ANSI B31.1
Power piping
ANSI C37.011 IEEE application guide for transient recovery voltage for AC highvoltage circuit breakers rated on a symmetrical current
AEC
C. C. C. SKIKDA
C227879
Rev. 0; January 2003
Page 8 of 9
ANSI C37.013 IEEE standard for AC high-voltage generator circuit breaker rated on a
symmetrical current.
ANSI C37.23
phase bus
ANSI C37.20
ANSI C50.10
ANSI C50.13
generators.
ANSI C50.14
ANSI C50.15
IEC 34
IEC 45
IEC 56
IEC 67
IEC 76
Power transformers
IEC 255
Electrical relays
IEC 298
kV and up including 52 kV
IEC 439
IEC 694
AEC
C. C. C. SKIKDA
C227879
Rev. 0; January 2003
Page 9 of 9
IEC 726
IEC 947
IEC 953-2
IEEE-32
Devices.
IEEE-81
IEEE Guide for measuring earth resistivity, ground impedance and earth
IEEE-112
IEEE-115
IEEE-421.4