Академический Документы
Профессиональный Документы
Культура Документы
Created by:
Phone:
Date:
Position
1/21/2016
Qty. Description
1
NB 150-500/521 A-F2-A-BAQE
Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 5199 with
dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 10 with dimensions
according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and
a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing
the pump housing or pipework.
The unbalanced rubber bellows seal is according to DIN EN 12756.
The pump is close-coupled to a fan-cooled asynchronous motor.
Cast-iron parts have an epoxy-based coating made in a cathodic electro-deposition (CED) process.
CED is a high-quality dip-painting process where an electrical field around the products ensures
deposition of paint particles as a thin, well-controlled layer on the surface. An integral part of the
process is a pretreatment. The entire process consists of these elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.
Pump
The pump housing has both a priming and a drain hole closed by plugs.
The impeller is a closed impeller with double-curved blades with smooth surfaces. The impeller is
statically balanced according to ISO 1940-1 class G6.3 and hydraulically balanced to compensate for
axial thrust.
Wear rings used in pump housing and for impeller are made of bronze/brass or cast iron.
Motor stool and pump cover are made of cast iron (EN-GJL-250). Coupling guards are fitted to the
motor stool. The pump cover is provided with a manual air vent screw for venting of the pump housing
and the shaft seal chamber.
The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the spring
and around the bellows. Due to the bellows, the seal does not wear the shaft, and the axial movement
is not prevented by deposits on the shaft.
Primary seal:
- Rotating seal ring material: Carbon graphite, metal-impregnated
- Stationary seat material: Silicon carbide (SiC)
Printed from Grundfos Product Centre [2015.09.024]
1/8
1/21/2016
Qty. Description
This material pairing has a very good corrosion resistance and is especially suitable for water up to
+120 C. However, seal life will be reduced at temperatures above +90 C. The material pairing is not
recommended for liquids containing particles as this will result in heavy wear on the SiC face.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.
Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30.
The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082.
The protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalled
conditions.
Thermal switches must be connected to an external control circuit in a way which ensures that the
automatic reset cannot cause accidents. The motors must be connected to a motor-protective circuit
breaker according to local regulations.
A variable speed drive makes adjustment of pump performance to any duty point possible. If the motor
is to be connected to a variable speed drive, the pump should be ordered with an electrically insulated
motor bearing.
Technical data
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
Kinematic viscosity:
Water
0 .. 120 C
20 C
998.2 kg/m
1 mm2/s
Technical:
Speed for pump data:
Actual calculated flow:
Resulting head of the pump:
Actual impeller diameter:
Impeller nom:
Primary shaft:
Secondary shaft seal:
Curve tolerance:
1490 rpm
555 m/h
91.92 m
521 mm
500 mm
BAQE
NONE
ISO9906:2012 3B
Materials:
Pump housing:
Impeller:
Cast iron
EN-GJL-250
ASTM A48-40 B
Cast iron
EN-GJL-200
ASTM A48-30 B
Installation:
Maximum ambient temperature:
Maximum operating pressure:
Flange standard:
Pump inlet:
Pump outlet:
Pressure stage:
55 C
16 bar
EN 1092-2
DN 200
DN 150
PN 16
Electrical data:
Motor type:
SIEMENS
2/8
1/21/2016
Qty. Description
IE Efficiency class:
Number of poles:
Rated power - P2:
Mains frequency:
Rated voltage:
Rated current:
Starting current:
Cos phi - power factor:
Rated speed:
Efficiency:
Motor efficiency at full load:
Motor efficiency at 3/4 load:
Motor efficiency at 1/2 load:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
Lubricant type:
IE3
4
200 kW
50 Hz
3 x 380-420D/660-725Y V
355-330/206-190 A
740-740 %
0,9
1490 rpm
IE3 96,0%
96.0-96.0 %
96.3-96.3 %
96.1-96.1 %
55 (Protect. water jets/dust)
F
Grease
Others:
Minimum efficiency index, MEI : 0.47
ErP status:
EuP Standalone/Prod.
Net weight:
1610 kg
Gross weight:
1760 kg
Shipping volume:
2.35 m
3/8
1/21/2016
99047294 NB 150-500/521 50 Hz
H
[m]
NB 150-500/521, 50Hz
eta
[%]
Q = 555 m/h
H = 91.92 m
Pumped liquid = Water
Liquid temperature = 20 C
Density = 998.2 kg/m
110
100
90
80
70
60
50
100
40
80
30
60
20
40
10
20
Eta pump = 77 %
Eta pump+motor = 74 %
0
0
50
100
150
200
250
300
350
400
450
500
550
600
650
Q [m/h]
P
[kW]
NPSH
[m]
P1
200
P2
40
150
30
100
20
50
10
P1 = 187.7 kW
P2 = 180.4 kW
NPSH = 8.23 m
0
4/8
1/21/2016
H
[m]
Value
NB 150-500/521, 50Hz
eta
[%]
110
NB 150-500/521 A-F2-A-BAQE
99047294
5711492779903
On request
100
90
80
70
60
Material code:
100
40
80
30 Q = 555 m/h
H = 91.92 m
20 Pumped liquid = Water
10 Liquid temperature = 20 C
Density = 998.2 kg/m
0
0
100
200
300
P
[kW]
60
40
Eta pump = 77 %
Eta pump+motor = 74 %
400
500
NPSH
[m]
200
P2
100
P1 = 187.7 kW
P2 = 180.4 kW
NPSH = 8.23 m
0
554
Electrical data:
Motor type:
IE Efficiency class:
Number of poles:
Rated power - P2:
Mains frequency:
Rated voltage:
Rated current:
Starting current:
Cos phi - power factor:
Rated speed:
Efficiency:
Motor efficiency at full load:
Motor efficiency at 3/4 load:
Motor efficiency at 1/2 load:
SIEMENS
IE3
4
200 kW
50 Hz
3 x 380-420D/660-725Y V
355-330/206-190 A
740-740 %
0,9
1490 rpm
IE3 96,0%
96.0-96.0 %
96.3-96.3 %
96.1-96.1 %
500
515
515
8 x 23
150
200
20
500
625
28
216
508
125
396
150
508
8 x 23
299
180
216
8 x 23
150
508
353
216
396
508
200
500
625
150
125
8 x 23
180
150
180
299
299
+T
+T
RELAY
+T
216
+T
TO AMPLIFIER
L1
500
374
374
554
1232
L2
+T
L3
+T
TO AMPLIFIER
28
20
508
Water
0 .. 120 C
20 C
998.2 kg/m
1 mm2/s
10
150
180
660
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
Kinematic viscosity:
20
1232
353
55 C
16 bar
EN 1092-2
F1
DN 200
DN 150
PN 16
neckring(s)
600 Q [m/h]
P1
Cast iron
EN-GJL-250
ASTM A48-40 B
Cast iron
EN-GJL-200
ASTM A48-30 B
A
Installation:
Maximum ambient temperature:
Maximum operating pressure:
Flange standard:
Connect code:
Pump inlet:
Pump outlet:
Pressure stage:
Wear ring(s):
20
400
Impeller:
50
315
Materials:
Pump housing:
1490 rpm
555 m/h
91.92 m
521 mm
500 mm
BAQE
NONE
60 mm
ISO9906:2012 3B
A
200
Technical:
Speed for pump data:
Actual calculated flow:
Resulting head of the pump:
Actual impeller diameter:
Impeller nom:
Primary shaft:
Secondary shaft seal:
Shaft diameter:
Curve tolerance:
Pump version:
RELAY
L1
L2
L3
5/8
Value
55 (Protect. water jets/dust)
F
PTC
83V15450
IM B35
Grease
Others:
Minimum efficiency index, MEI :
ErP status:
Net weight:
Gross weight:
Shipping volume:
0.47
EuP Standalone/Prod.
1610 kg
1760 kg
2.35 m
1/21/2016
6/8
1/21/2016
99047294 NB 150-500/521 50 Hz
508
508
396
500
625
180
353
8 x 23
20
150
150
500
125
216
400
500
374
374
515
515
299
299
216
508
1232
28
315
8 x 23
180
150
200
554
660
200
Note! All units are in [mm] unless others are stated.
Disclaimer: This simplified dimensional drawing does not show all details.
Printed from Grundfos Product Centre [2015.09.024]
7/8
1/21/2016
99047294 NB 150-500/521 50 Hz
+T
+T
TO AMPLIFIER
RELAY
L1
+T
L2
+T
L3
+T
TO AMPLIFIER
+T
RELAY
L1
L2
L3
8/8