Вы находитесь на странице: 1из 45

WCDMA RAN

Redirection at RRC Connection


Release Feature Parameter
Description
Issue

Draft A

Date

2014-01-20

HUAWEI TECHNOLOGIES CO., LTD.

Copyright Huawei Technologies Co., Ltd. 2014. All rights reserved.


No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions


and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.


Address:

Huawei Industrial Base


Bantian, Longgang
Shenzhen 518129
People's Republic of China

Website:

http://www.huawei.com

Email:

support@huawei.com

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

Contents

Contents
1 About This Document..................................................................................................................1
1.1 Scope..............................................................................................................................................................................1
1.2 Intended Audience..........................................................................................................................................................1
1.3 Change History...............................................................................................................................................................1

2 Overview.........................................................................................................................................2
2.1 Introduction....................................................................................................................................................................2
2.2 Benefits...........................................................................................................................................................................2

3 Technical Description...................................................................................................................3
4 Related Features.............................................................................................................................5
5 Network Impact.............................................................................................................................6
6 Engineering Guidelines...............................................................................................................7
6.1 When to Use Redirection at RRC Connection Release..................................................................................................7
6.2 Required Information.....................................................................................................................................................7
6.3 Deployment....................................................................................................................................................................7
6.3.1 Requirements...............................................................................................................................................................7
6.3.2 Data Preparation..........................................................................................................................................................7
6.3.3 Activation....................................................................................................................................................................8
6.3.3.1 Using MML Commands...........................................................................................................................................8
6.3.3.2 MML Command Examples......................................................................................................................................8
6.3.3.3 Using the CME.........................................................................................................................................................8
6.3.4 Activation Observation................................................................................................................................................9
6.3.5 Deactivation...............................................................................................................................................................10
6.3.5.1 Using MML Commands.........................................................................................................................................10
6.3.5.2 MML Command Examples....................................................................................................................................10
6.3.5.3 Using the CME.......................................................................................................................................................10
6.4 Performance Monitoring...............................................................................................................................................11
6.5 Parameter Optimization................................................................................................................................................11
6.6 Troubleshooting............................................................................................................................................................11

7 Parameters.....................................................................................................................................12
8 Counters........................................................................................................................................39
Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

ii

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

Contents

9 Glossary.........................................................................................................................................40
10 Reference Documents...............................................................................................................41

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

iii

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

1 About This Document

About This Document

1.1 Scope
This document describes the Redirection at RRC Connection Release feature, including its
working principles, network impact, and engineering guidelines.

1.2 Intended Audience


This document is intended for:
l

Personnel who need to understand Redirection at RRC Connection Release

Personnel who maintain Huawei products

1.3 Change History


This section provides information about the changes in different document versions. There are
two types of changes, which are defined as follows:
l

Feature change
Refers to a change in the Redirection at RRC Connection Release feature of a specific
product version.

Editorial change
Refers to a change in wording or the addition of information that was not described in the
earlier version.

Draft A (2014-01-20)
This is a new document.
This version is RAN16.0.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

2 Overview

Overview

2.1 Introduction
The Redirection at RRC Connection Release feature can redirect a UE complying with 3GPP
Release 6 or later to another frequency when the RRC connection is released. The information
element Redirection Info in the RRC Connection Release message contains information about
the target frequency.

2.2 Benefits
In multi-carrier networks, UEs in the idle, CELL_PCH, and URA_PCH states preferentially
camp on and set up CS voice services on a specified cell, and set up PS data services on other
cells. This guarantees the quality of CS voice services.
In addition, the target frequency information that the RRC Connection Release message contains
enables a UE to quickly return to its preferentially camped cell when the RRC connection is
released, which minimizes the possibility that CS voice services are set up on other cells. This
also guarantees the quality of CS voice services.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

3 Technical Description

Technical Description

As shown in the following figure, UEs in the idle, CELL_PCH, and URA_PCH states
preferentially camp on cell F1 in a typical multi-carrier network using service steering. CS voice
services are directly set up on cell F1, and PS data services are steered to cells F2 and F3.
Figure 3-1 Multi-carrier network using service steering

To ensure that a UE quickly returns to F1 after finishing services on F2 or F3, the RRC
Connection Release message contains the frequency information about F1.
Figure 3-2 RRC Connection Release message with frequency information
Figure 3-3

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

3 Technical Description

When releasing the RRC connection, the RNC checks the value of RedirSwitch (under the
UCELLREDRRCREL managed object) in the ADD UCELLREDRRCREL command.
If RedirSwitch is set to OFF, the RNC does not redirect a UE to another frequency at RRC
connection release.
If RedirSwitch is set to Only_To_Inter_Frequency, the RNC first identifies the UE category.
l

If the UE complies with 3GPP Release 6 or later, the RNC redirects the UE to another
frequency at RRC connection release. The RNC includes the target frequency information
in the RRC Connection Release message and sends the message to the UE.

If the UE complies with 3GPP Release 5 or earlier, the RNC does not include the target
frequency information in the RRC Connection Release message.

The RNC selects the target frequency based on the value of RedirBandInd.
l

If RedirBandInd is set to any value from Band 1 to Band 9, the RNC selects the target
frequency based on the values of the following parameters:
ReDirUARFCNUplinkInd
ReDirUARFCNUplink
ReDirUARFCNDownlink

If RedirBandInd is set to DependOnNCell, the RNC selects the frequency of the current
cell's intra-band inter-frequency neighboring cell that supports blind handovers from the
current cell as the target frequency. The neighboring cell should not be in the overload
control (OLC) state.
If multiple frequencies are available:
When the RrcCellLoadSortSwitch in the ADD UCELLDRD command is set to ON,
the RNC selects the frequency of the neighboring cell with the maximum remaining
capacity of HSDPA UEs.
When RrcCellLoadSortSwitch is set to OFF, the RNC selects the frequency of the first
neighboring cell in the neighboring cell list.
NOTE

In the example shown in Figure 1, RedirBandInd cannot be set to DependOnNCell for F2 or F3. The
reason is as follows: The F1 cell does not have HSDPA activated and therefore does not allow any HSDPA
UEs. If RedirBandInd is set to DependOnNCell for F2 or F3, the RNC will not select the frequency of
F1 as the target frequency and the UE will not be redirected to F1.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

4 Related Features

Related Features

Prerequisite Features
None

Mutually Exclusive Features


None

Impacted Features
None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

5 Network Impact

Network Impact

System Capacity
None

Network Performance
The target frequency information that the RRC Connection Release message contains enables
a UE to return to its preferentially camped cell quickly, which minimizes the possibility that CS
voice services are set up on other cells. This guarantees the quality of CS voice services.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

6 Engineering Guidelines

Engineering Guidelines

6.1 When to Use Redirection at RRC Connection Release


This feature is recommended for multi-carrier networks where service steering and preferred
camping are used.

6.2 Required Information


Before deploying this feature, obtain the camping strategy of the multi-carrier network and the
frequency of the preferentially camped cell.

6.3 Deployment
6.3.1 Requirements
None

6.3.2 Data Preparation


Parameter
Name

Parameter ID

Setting Notes

Data
Source

Redirection
Switch

RedirSwitch

Set this parameter to


Only_To_Inter_Frequency.

Engineering
design

Redirection
target band
indicator

RedirBandInd

Set this parameter to the


frequency band on which UEs
preferentially camp.

Engineering
design

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

6 Engineering Guidelines

Parameter
Name

Parameter ID

Setting Notes

Data
Source

Redirection
Target UL
Frequency
Index

ReDirUARFCNUplinkInd

None

Engineering
design

Target
Downlink
UARFCN for
Redirection

ReDirUARFCNDownlink

Set this parameter to the


UARFCN of the downlink
frequency on which UEs
preferentially camp.

Engineering
design

Target Uplink
UARFCN for
Redirection

ReDirUARFCNUplink

Set this parameter to the


UARFCN of the uplink
frequency on which UEs
preferentially camp.

Engineering
design

6.3.3 Activation
6.3.3.1 Using MML Commands
Step 1 To activate this feature, run the BSC6900 or BSC6910 MML command ADD
UCELLREDRRCREL. In this step, set RedirSwitch to
ONLY_TO_INTER_FREQUENCY and set RedirBandInd, ReDirUARFCNUplinkInd,
ReDirUARFCNUplink, and ReDirUARFCNDownlink to appropriate values.
----End

6.3.3.2 MML Command Examples


//Activating Redirection at RRC Connection Release and specifying the corresponding
UARFCNs
ADD UCELLREDRRCREL: CellId=001, RedirSwitch=ONLY_TO_INTER_FREQUENCY,
RedirBandInd=BAND1, ReDirUARFCNUplinkInd=FALSE,
ReDirUARFCNDownlink=10562;

6.3.3.3 Using the CME


NOTE

When configuring the Redirection at RRC Connection Release feature on the CME, perform a single
configuration first, and then perform a batch modification if required. Configure the parameters of a single
object before a batch modification. Perform a batch modification before logging out of the parameter setting
interface.

Step 1 Configure a single object (such as a cell) on the CME.


Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

6 Engineering Guidelines

Set parameters on the CME according to the operation sequence in Table 6-1. For instructions
on how to perform the CME single configuration, see CME Single Configuration Operation
Guide.
Step 2 (Optional) Modify objects in batches on the CME. (CME batch modification center)
To modify objects in batches, click
on the CME to start the batch modification wizard. For
instructions on how to perform a batch modification through the CME batch modification center,
press F1 on the wizard interface to obtain online help.
----End
Table 6-1 Configuring the parameters on the CME
SN

MO

NE

Parameter Name

Parameter ID

Configurabl
e in CME
Batch
Modificatio
n Center

UCELLR
EDRRC
REL

RNC

Redirection Switch

RedirSwitch

Yes

Redirection target band


indicator

RedirBandInd

Yes

Redirection Target UL
Frequency Index

ReDirUARFC
NUplinkInd

Yes

Target Downlink UARFCN


for Redirection

ReDirUARFC
NDownlink

Yes

Target Uplink UARFCN for


Redirection

ReDirUARFC
NUplink

Yes

Set to
ONLY_TO_INTER_FRE
QUENCY

6.3.4 Activation Observation


After this feature is activated, the signaling trace results show that the Redirection info IE in the
RRC Connection Release message contains the target frequency information.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

6 Engineering Guidelines

Figure 6-1 Activation observation

6.3.5 Deactivation
6.3.5.1 Using MML Commands
To deactivate this feature, run the cell-level MOD UCELLREDRRCREL command on the
RNC LMT.

6.3.5.2 MML Command Examples


//Deactivating Redirection at RRC Connection Release
MOD UCELLREDRRCREL: CellId=001, RedirSwitch=OFF;

6.3.5.3 Using the CME


NOTE

When configuring the Redirection at RRC Connection Release feature on the CME, perform a single
configuration first, and then perform a batch modification if required. Configure the parameters of a single
object before a batch modification. Perform a batch modification before logging out of the parameter setting
interface.

Step 1 Configure a single object (such as a cell) on the CME.


Set parameters on the CME according to the operation sequence in Table 6-2. For instructions
on how to perform the CME single configuration, see CME Single Configuration Operation
Guide.
Step 2 (Optional) Modify objects in batches on the CME. (CME batch modification center)
on the CME to start the batch modification wizard. For
To modify objects in batches, click
instructions on how to perform a batch modification through the CME batch modification center,
press F1 on the wizard interface to obtain online help.
----End
Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

10

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

6 Engineering Guidelines

Table 6-2 Configuring the parameter on the CME


SN

MO

NE

Parameter Name

Parameter ID

Configurabl
e in CME
Batch
Modificatio
n Center

UCELLREDR
RCREL

RNC

Redirection Switch

RedirSwitch

Yes

Set to OFF.

6.4 Performance Monitoring


In cells where this feature is activated, check that the value of the VS.RRC.AttConnEstab.Sum
counter (the number of RRC connection setup requests) decreases.

6.5 Parameter Optimization


None

6.6 Troubleshooting
None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

11

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

7 Parameters

Parameters

Table 7-1 Parameter description


Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

RedirSwitch

BSC6900

ADD
UCELLREDRR
CREL

WRFD-020120

Service Steering
and Load
Sharing in RRC
Connection
Setup

Meaning:Wheth
er the RRC
redirection
algorithm is
valid for the
specified
service. The
algorithm is
valid only when
the RRC direct
redirection
switch is
enabled and
when this
parameter is set
to
ONLY_TO_IN
TER_FREQUE
NCY. - OFF
indicates that
RRC redirection
is not allowed. Only_To_Inter_
Frequency
indicates that
only RRC
redirection to
inter-frequency
cells is allowed.

MOD
UCELLREDRR
CREL

GUI Value
Range:OFF,

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

12

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

Parameter ID

NE

MML
Command

7 Parameters

Feature ID

Feature Name

Description
ONLY_TO_IN
TER_FREQUE
NCY
Unit:None
Actual Value
Range:OFF,
ONLY_TO_IN
TER_FREQUE
NCY
Default
Value:None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

13

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

RedirSwitch

BSC6910

ADD
UCELLREDRR
CREL

WRFD-020120

Service Steering
and Load
Sharing in RRC
Connection
Setup

Meaning:Wheth
er the RRC
redirection
algorithm is
valid for the
specified
service. The
algorithm is
valid only when
the RRC direct
redirection
switch is
enabled and
when this
parameter is set
to
ONLY_TO_IN
TER_FREQUE
NCY. - OFF
indicates that
RRC redirection
is not allowed. Only_To_Inter_
Frequency
indicates that
only RRC
redirection to
inter-frequency
cells is allowed.

MOD
UCELLREDRR
CREL

GUI Value
Range:OFF,
ONLY_TO_IN
TER_FREQUE
NCY
Unit:None
Actual Value
Range:OFF,
ONLY_TO_IN
TER_FREQUE
NCY
Default
Value:None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

14

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

RedirBandInd

BSC6900

ADD
UCELLREDRR
CREL

WRFD-020120

Service Steering
and Load
Sharing in RRC
Connection
Setup

Meaning:Freque
ncy band of the
target UL and
DL UARFCNs
to which the UE
is redirected. It
is recommended
that this
parameter is set
to Depending on
the
configuration of
neighboring
cells without the
consideration of
NRNC
neighboring
cells, that is, in
the nonoverlapped
network. This
helps avoid selfredirection.
Self-redirection
is a case in
which
redirection is
initiated in the
current cell
when the
UARFCN to
which the UE is
redirected is the
same as that of
the current cell.

MOD
UCELLREDRR
CREL

WRFD-020400
05

Inter-Frequency
Redirection
Based on
Distance

GUI Value
Range:Band1,
Band2, Band3,
Band4, Band5,
Band6, Band7,
Band8, Band9,
DependOnNCel
l,
BandIndNotUse
d
Unit:None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

15

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

Parameter ID

NE

MML
Command

7 Parameters

Feature ID

Feature Name

Description
Actual Value
Range:Band1,
Band2, Band3,
Band4, Band5,
Band6, Band7,
Band8, Band9,
DependOnNCel
l,
BandIndNotUse
d
Default
Value:None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

16

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

RedirBandInd

BSC6910

ADD
UCELLREDRR
CREL

WRFD-020120

Service Steering
and Load
Sharing in RRC
Connection
Setup

Meaning:Freque
ncy band of the
target UL and
DL UARFCNs
to which the UE
is redirected. It
is recommended
that this
parameter is set
to Depending on
the
configuration of
neighboring
cells without the
consideration of
NRNC
neighboring
cells, that is, in
the nonoverlapped
network. This
helps avoid selfredirection.
Self-redirection
is a case in
which
redirection is
initiated in the
current cell
when the
UARFCN to
which the UE is
redirected is the
same as that of
the current cell.

MOD
UCELLREDRR
CREL

WRFD-020400
05

Inter-Frequency
Redirection
Based on
Distance

GUI Value
Range:Band1,
Band2, Band3,
Band4, Band5,
Band6, Band7,
Band8, Band9,
DependOnNCel
l,
BandIndNotUse
d
Unit:None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

17

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

Parameter ID

NE

MML
Command

7 Parameters

Feature ID

Feature Name

Description
Actual Value
Range:Band1,
Band2, Band3,
Band4, Band5,
Band6, Band7,
Band8, Band9,
DependOnNCel
l,
BandIndNotUse
d
Default
Value:None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

18

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

ReDirUARFCN
UplinkInd

BSC6900

ADD
UCELLREDRR
CREL

WRFD-020120

Service Steering
and Load
Sharing in RRC
Connection
Setup

Meaning:Wheth
er to configure a
target uplink
UARFCN for
the redirection
procedure.
When this
parameter is set
to TRUE, a
target uplink
UARFCN must
be configured
for the
redirection
procedure.
Configuring a
target uplink
UARFCN for
the redirection
procedure is not
required when
this parameter is
set to FALSE.
Then, the target
uplink
UARFCN is
automatically
configured
based on the
configured
target downlink
UARFCN.

MOD
UCELLREDRR
CREL

WRFD-020400
05

Inter-Frequency
Redirection
Based on
Distance

GUI Value
Range:FALSE,
TRUE
Unit:None
Actual Value
Range:FALSE,
TRUE
Default
Value:None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

19

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

ReDirUARFCN
UplinkInd

BSC6910

ADD
UCELLREDRR
CREL

WRFD-020120

Service Steering
and Load
Sharing in RRC
Connection
Setup

Meaning:Wheth
er to configure a
target uplink
UARFCN for
the redirection
procedure.
When this
parameter is set
to TRUE, a
target uplink
UARFCN must
be configured
for the
redirection
procedure.
Configuring a
target uplink
UARFCN for
the redirection
procedure is not
required when
this parameter is
set to FALSE.
Then, the target
uplink
UARFCN is
automatically
configured
based on the
configured
target downlink
UARFCN.

MOD
UCELLREDRR
CREL

WRFD-020400
05

Inter-Frequency
Redirection
Based on
Distance

GUI Value
Range:FALSE,
TRUE
Unit:None
Actual Value
Range:FALSE,
TRUE
Default
Value:None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

20

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

ReDirUARFCN
Uplink

BSC6900

ADD
UCELLREDRR
CREL

WRFD-020120

Service Steering
and Load
Sharing in RRC
Connection
Setup

Meaning:Target
uplink
UARFCN that is
to be included in
the RRC
CONNECTION
RELEASE
message for the
redirection
procedure. The
following are
the available
target uplink
UARFCNs:
Band1 Common
UARFCN
range:
[9612-9888]
Special
UARFCNs:
None Band2
Common
UARFCN
range:
[9262-9538]
Special
UARFCNs: 12,
37, 62, 87, 112,
137, 162, 187,
212, 237, 262,
287 Band3
Common
UARFCN
range:
[937-1288]
Special
UARFCNs:
None Band4
Common
UARFCN
range:
[1312-1513]
Special
UARFCNs:
1662, 1687,
1712, 1737,
1762, 1787,
1812, 1837,

MOD
UCELLREDRR
CREL

Issue Draft A (2014-01-20)

WRFD-020400
05

Inter-Frequency
Redirection
Based on
Distance

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

21

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

Parameter ID

NE

MML
Command

7 Parameters

Feature ID

Feature Name

Description
1862 Band5
Common
UARFCN
range:
[4132-4233]
Special
UARFCNs: 782,
787, 807, 812,
837, 862 Band6
Common
UARFCN
range:
[4162-4188]
Special
UARFCNs: 812,
837 Band7
Common
UARFCN
range:
[2012-2338]
Special
UARFCNs:
2362, 2387,
2412, 2437,
2462, 2487,
2512, 2537,
2562, 2587,
2612, 2637,
2662, 2687
Band8 Common
UARFCN
range:
[2712-2863]
Special
UARFCNs:
None Band9
Common
UARFCN
range:
[8762-8912]
Special
UARFCNs:
None When the
"RedirBandInd"
parameter is set
to
BandIndNotUse
d, the value

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

22

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

Parameter ID

NE

MML
Command

7 Parameters

Feature ID

Feature Name

Description
range is from 0
to 16383. Value
range: 0~16383
If a target uplink
UARFCN is not
manually
configured, a
target uplink
UARFCN is
automatically
configured
when the
corresponding
target downlink
UARFCN has
been configured
and the
"RedirBandInd"
parameter is set
to Band1,
Band2, Band3,
Band4, Band5,
Band6, Band7,
Band8, or
Band9. The
target uplink
UARFCN is
automatically
configured
using one of the
following
formulas: When
the
corresponding
target downlink
UARFCN is a
common
UARFCN:
Band1: Target
uplink
UARFCN =
Target downlink
UARFCN - 950
Band2: Target
uplink
UARFCN =
Target downlink
UARFCN - 400

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

23

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

Parameter ID

NE

MML
Command

7 Parameters

Feature ID

Feature Name

Description
Band3/4/5/6/7/8
: Target uplink
UARFCN =
Target downlink
UARFCN - 225
Band9: Target
uplink
UARFCN =
Target downlink
UARFCN - 475
When the
corresponding
target downlink
UARFCN is a
special
UARFCN:
Band2: Target
uplink
UARFCN =
Target downlink
UARFCN - 400
Band4/5/6/7:
Target uplink
UARFCN =
Target downlink
UARFCN - 225
GUI Value
Range:0~16383
Unit:None
Actual Value
Range:0~16383
Default
Value:None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

24

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

ReDirUARFCN
Uplink

BSC6910

ADD
UCELLREDRR
CREL

WRFD-020120

Service Steering
and Load
Sharing in RRC
Connection
Setup

Meaning:Target
uplink
UARFCN that is
to be included in
the RRC
CONNECTION
RELEASE
message for the
redirection
procedure. The
following are
the available
target uplink
UARFCNs:
Band1 Common
UARFCN
range:
[9612-9888]
Special
UARFCNs:
None Band2
Common
UARFCN
range:
[9262-9538]
Special
UARFCNs: 12,
37, 62, 87, 112,
137, 162, 187,
212, 237, 262,
287 Band3
Common
UARFCN
range:
[937-1288]
Special
UARFCNs:
None Band4
Common
UARFCN
range:
[1312-1513]
Special
UARFCNs:
1662, 1687,
1712, 1737,
1762, 1787,
1812, 1837,

MOD
UCELLREDRR
CREL

Issue Draft A (2014-01-20)

WRFD-020400
05

Inter-Frequency
Redirection
Based on
Distance

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

25

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

Parameter ID

NE

MML
Command

7 Parameters

Feature ID

Feature Name

Description
1862 Band5
Common
UARFCN
range:
[4132-4233]
Special
UARFCNs: 782,
787, 807, 812,
837, 862 Band6
Common
UARFCN
range:
[4162-4188]
Special
UARFCNs: 812,
837 Band7
Common
UARFCN
range:
[2012-2338]
Special
UARFCNs:
2362, 2387,
2412, 2437,
2462, 2487,
2512, 2537,
2562, 2587,
2612, 2637,
2662, 2687
Band8 Common
UARFCN
range:
[2712-2863]
Special
UARFCNs:
None Band9
Common
UARFCN
range:
[8762-8912]
Special
UARFCNs:
None When the
"RedirBandInd"
parameter is set
to
BandIndNotUse
d, the value

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

26

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

Parameter ID

NE

MML
Command

7 Parameters

Feature ID

Feature Name

Description
range is from 0
to 16383. Value
range: 0~16383
If a target uplink
UARFCN is not
manually
configured, a
target uplink
UARFCN is
automatically
configured
when the
corresponding
target downlink
UARFCN has
been configured
and the
"RedirBandInd"
parameter is set
to Band1,
Band2, Band3,
Band4, Band5,
Band6, Band7,
Band8, or
Band9. The
target uplink
UARFCN is
automatically
configured
using one of the
following
formulas: When
the
corresponding
target downlink
UARFCN is a
common
UARFCN:
Band1: Target
uplink
UARFCN =
Target downlink
UARFCN - 950
Band2: Target
uplink
UARFCN =
Target downlink
UARFCN - 400

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

27

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

Parameter ID

NE

MML
Command

7 Parameters

Feature ID

Feature Name

Description
Band3/4/5/6/7/8
: Target uplink
UARFCN =
Target downlink
UARFCN - 225
Band9: Target
uplink
UARFCN =
Target downlink
UARFCN - 475
When the
corresponding
target downlink
UARFCN is a
special
UARFCN:
Band2: Target
uplink
UARFCN =
Target downlink
UARFCN - 400
Band4/5/6/7:
Target uplink
UARFCN =
Target downlink
UARFCN - 225
GUI Value
Range:0~16383
Unit:None
Actual Value
Range:0~16383
Default
Value:None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

28

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

ReDirUARFCN
Downlink

BSC6900

ADD
UCELLREDRR
CREL

WRFD-020120

Service Steering
and Load
Sharing in RRC
Connection
Setup

Meaning:Target
downlink
UARFCN that is
to be included in
the RRC
CONNECTION
RELEASE
message for the
redirection
procedure. The
following are
the available
target downlink
UARFCNs:
Band1 Common
UARFCN
range:
[10562-10838]
Special
UARFCNs:
None Band2
Common
UARFCN
range:
[9662-9938]
Special
UARFCNs: 412,
437, 462, 487,
512, 537, 562,
587, 612, 637,
662, 687 Band3
Common
UARFCN
range:
[1162-1513]
Special
UARFCNs:
None Band4
Common
UARFCN
range:
[1537-1738]
Special
UARFCNs:
1887, 1912,
1937, 1962,
1987, 2012,
2037, 2062,

MOD
UCELLREDRR
CREL

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

29

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

Parameter ID

NE

MML
Command

7 Parameters

Feature ID

Feature Name

Description
2087 Band5
Common
UARFCN
range:
[4357-4458]
Special
UARFCNs:
1007, 1012,
1032, 1037,
1062, 1087
Band6 Common
UARFCN
range:
[4387-4413]
Special
UARFCNs:
1037, 1062
Band7 Common
UARFCN
range:
[2237-2563]
Special
UARFCNs:
2587, 2612,
2637, 2662,
2687, 2712,
2737, 2762,
2787, 2812,
2837, 2862,
2887, 2912
Band8 Common
UARFCN
range:
[2937-3088]
Special
UARFCNs:
None Band9
Common
UARFCN
range:
[9237-9387]
Special
UARFCNs:
None When the
"RedirBandInd"
parameter is set
to
BandIndNotUse

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

30

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

Parameter ID

NE

MML
Command

7 Parameters

Feature ID

Feature Name

Description
d, the value
range is from 0
to 16383.
GUI Value
Range:0~16383
Unit:None
Actual Value
Range:0~16383
Default
Value:None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

31

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

ReDirUARFCN
Downlink

BSC6910

ADD
UCELLREDRR
CREL

WRFD-020120

Service Steering
and Load
Sharing in RRC
Connection
Setup

Meaning:Target
downlink
UARFCN that is
to be included in
the RRC
CONNECTION
RELEASE
message for the
redirection
procedure. The
following are
the available
target downlink
UARFCNs:
Band1 Common
UARFCN
range:
[10562-10838]
Special
UARFCNs:
None Band2
Common
UARFCN
range:
[9662-9938]
Special
UARFCNs: 412,
437, 462, 487,
512, 537, 562,
587, 612, 637,
662, 687 Band3
Common
UARFCN
range:
[1162-1513]
Special
UARFCNs:
None Band4
Common
UARFCN
range:
[1537-1738]
Special
UARFCNs:
1887, 1912,
1937, 1962,
1987, 2012,
2037, 2062,

MOD
UCELLREDRR
CREL

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

32

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

Parameter ID

NE

MML
Command

7 Parameters

Feature ID

Feature Name

Description
2087 Band5
Common
UARFCN
range:
[4357-4458]
Special
UARFCNs:
1007, 1012,
1032, 1037,
1062, 1087
Band6 Common
UARFCN
range:
[4387-4413]
Special
UARFCNs:
1037, 1062
Band7 Common
UARFCN
range:
[2237-2563]
Special
UARFCNs:
2587, 2612,
2637, 2662,
2687, 2712,
2737, 2762,
2787, 2812,
2837, 2862,
2887, 2912
Band8 Common
UARFCN
range:
[2937-3088]
Special
UARFCNs:
None Band9
Common
UARFCN
range:
[9237-9387]
Special
UARFCNs:
None When the
"RedirBandInd"
parameter is set
to
BandIndNotUse

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

33

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

Parameter ID

NE

MML
Command

7 Parameters

Feature ID

Feature Name

Description
d, the value
range is from 0
to 16383.
GUI Value
Range:0~16383
Unit:None
Actual Value
Range:0~16383
Default
Value:None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

34

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

RrcCellLoadSortSwitch

BSC6900

ADD
UCELLDRD

WRFD-020120

Service Steering
and Load
Sharing in RRC
Connection
Setup

Meaning:Wheth
er to consider the
cell load when
selecting a target
cell for
redirection from
inter-frequency
co-coverage
neighboring
cells during the
RRC connection
setup or release.
When this
switch is turned
on, the RNC
arranges interfrequency cocoverage
neighboring
cells based on
the cell load that
is calculated
based on the
number of
existing HSPA
UEs and then
selects the cell
with the lowest
load as the target
cell for
redirection.
When this
switch is turned
off, the RNC
does not arrange
inter-frequency
co-coverage
neighboring
cells.

MOD
UCELLDRD

WRFD-150201

Macro & Micro


Co-carrier
Uplink
Interference
Control

GUI Value
Range:OFF, ON
Unit:None
Actual Value
Range:OFF,
ONLY_TO_IN
TER_FREQUE
NCY

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

35

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

Parameter ID

NE

MML
Command

7 Parameters

Feature ID

Feature Name

Description
Default
Value:OFF

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

36

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

RrcCellLoadSortSwitch

BSC6910

ADD
UCELLDRD

WRFD-020120

Service Steering
and Load
Sharing in RRC
Connection
Setup

Meaning:Wheth
er to consider the
cell load when
selecting a target
cell for
redirection from
inter-frequency
co-coverage
neighboring
cells during the
RRC connection
setup or release.
When this
switch is turned
on, the RNC
arranges interfrequency cocoverage
neighboring
cells based on
the cell load that
is calculated
based on the
number of
existing HSPA
UEs and then
selects the cell
with the lowest
load as the target
cell for
redirection.
When this
switch is turned
off, the RNC
does not arrange
inter-frequency
co-coverage
neighboring
cells.

MOD
UCELLDRD

WRFD-150201

Macro & Micro


Co-carrier
Uplink
Interference
Control

GUI Value
Range:OFF, ON
Unit:None
Actual Value
Range:OFF,
ONLY_TO_IN
TER_FREQUE
NCY

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

37

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

Parameter ID

NE

MML
Command

7 Parameters

Feature ID

Feature Name

Description
Default
Value:OFF

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

38

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

8 Counters

Counters

There are no specific counters associated with this feature.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

39

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

9 Glossary

Glossary

For the acronyms, abbreviations, terms, and definitions, see Glossary.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

40

WCDMA RAN
Redirection at RRC Connection Release Feature Parameter
Description

10
1.

10 Reference Documents

Reference Documents

3GPP TS 25.331, "Radio Resource Control (RRC)"

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

41

Вам также может понравиться