Академический Документы
Профессиональный Документы
Культура Документы
X 6
January 2006
series/0.2
1.0
Flooring Systems
Reinforcement
Windposts
Lintels
1.0
COMPANY PROFILE
Wincro Metal Industries is a long established
company founded on the principles of innovative
design, quality manufacture and outstanding
customer service. Our steadfast commitment
to those values over the years has firmly
established Wincro as one of todays leading
designers and manufacturers of Stainless Steel
Building Products. It has also earned the
company an excellent reputation for quality
and reliability amongst the many architects,
specifiers, engineers and building contractors
that the business serves.
Wincro is based in Sheffield, the home of
stainless steel. We produce a wide range
of corrosion resistant fixings, support systems,
flooring and access equipment. Our range is
constantly evolving and developing in order to
keep pace with the demands of a fast-moving
industry and the changing needs of our clients.
CONTENTS
TIES & RESTRAINTS PRODUCT RANGE
WINCRO GENERAL WALL TIES
A GUIDE TO THE INSTALLATION OF WALL TIES
WINCRO TIES & RESTRAINTS PRODUCT SELECTOR
ORDERING AND SPECIFYING BESPOKE TIES
2-3
4
5
6-7
8
10
11
12
13
14
15
16-17
18-19
20-22
23
24-25
1.0
Standard Strip Ties
Wincros range of standard and special ties can be used in many applications
such as masonry-to-masonry, masonry-to-concrete and masonry-to-steelwork.
For further information go to page 4
1.0
2.0
Wincro Cavity Wall Ties
The range of cavity wire wall ties are suitable for dwellings up to 3 storeys
For further information go to page 4
2.0
3.0
Movement Ties
This tie restrains masonry against lateral wind loads while at the same time
allowing for expansion and contraction.
3.0
4.0
Wincro Frame Cramps
A full range of standard and bespoke cramps to suit cavities from
10mm upwards
For further information go to page 10
4.0
5.0
Universal Column Ties
The UC tie is a time-saving solution for tying masonry to steelwork and
eliminates the need for on-site drilling or shot-firing.
5.0
6.0
Fast Track Tie System
Typically used where the inner leaf is built before the outer leaf and particularly
useful with irregular coursing between inner and outer leaves.
For further information go to page 12
6.0
7.0
Two Part Tie
The innovative answer to larger cavity situations.
For further information go to page 12
7.0
email:sales@wincro.com
www.wincro.com
8.0
Channel Ties
Construction time is reduced and on-site drilling rendered unnecessary by the
range of ties for use with cast-in channels.
8.0
9.0
Lateral Restraint Fixings
These are especially useful below horizontal movement joints providing
support while allowing vertical movement
For further information go to pages 15
9.0
10.0
Sliding Brick Anchors
These restraint fixings provide a mechanical tie between masonry cladding
panels and the building frame where a movement joint is used.
Available with a variety of head and stem configurations to accommodate
fixing to the soffit or face of steelwork or concrete structures.
For further information go to pages 16-17
10.0
11.0
Stone Fixing Ties & Cramps
When selecting ties for restraining stone cladding, reference should be made to
the appropriate British Standard and, of course, to the help available from
Wincros Technical Design Team.
11.0
12.0
Masonry Reinforcement
Provides extra strength to masonry cladding panels and can also be used to
strengthen both inner and outer leaves and provide an alternative cavity
restraint fixing.
12.0
13.0
Remedial Wall Ties
Providing an economic repair solution where traditional cavity wall ties have
failed. Wincro provides a complete range of expanding mechanical and
resin-fixed wall ties.
13.0
1.0
2.0
3.0
4.0
Part E
Type A
All the above Ties can be used in conjunction with the Wincro WIC Insulation Retaining Clip
1.0
Selection
Building height
Type 1
56 m/s
All Heights
This is a Heavy Duty Tie suitable for buildings anywhere in the British Isles.
Type 1 is a Rigid Tie and not recommended where large differential movement
is expected between the leaves.
Type 2
56 m/s
Type 3
44 m/s
(Towns and Cities 52 m/s)
Type 4
44 m/s
(Towns and Cities 52 m/s)
Suitable for domestic dwellings of up to two storeys. Not suitable for cavity
walls having dissimilar thickness.
2.0
RESULTS OF MECHANICAL RESISTANCE TESTS UNDER DD140 CARRIED OUT BY THE DEPARTMENT
OF CIVIL & STRUCTURAL ENGINEERING AT THE UNIVERSITY OF SHEFFIELD
Design
Strength
cavity
width
(mm)
Up to 150
Up to 150
Up to 100
Up to 100
Description
Tension
Serviceability
load
Deformation
0.5mm (N)
Compression
Failure
load (N)
Serviceability
load
Deformation
0.5mm (N)
Failure
load (N)
1000
5000
750
5000
5215
6865
5277
6221
1000
4797
5000
5812
750
5361
5000
7337
500
1800
400
1300
864
2746
1220
1380
150
650
120
450
378
1640
453
464
email:sales@wincro.com
www.wincro.com
225
225
Head Restraints
600
600
600
450
225
450
450
300
2.0
225
450
Movement Ties at 450mm vertical centres
900
450
225
1.0
Tie Embedment
WT2 Tie
WT2 Tie
2.0
3.0
1.0
2.0
Tie Embedment
Wall Tie length
(mm)
Cavity width
(mm)
200
50-75
225
76-100
WT1 / WTS1S
250
101-125
WT1 / WTS1S
275
126-150
WT1 / WTS1S
300
150
RELEVANT BRITISH STANDARDS: BS1243: 1978 Specification of Metal Ties For Cavity Wall Construction. This now largely out-dated standard has been superseded by DD140 in most respects. It specifies
the three traditional types of wall tie (i.e. vertical twist, double triangle and butterfly) and defines the shape, material and manufacturing tolerances for each tie.
BS5628: Part 1: 1992 Structural use of Unreinforced Masonry. This is the standard masonry construction code, providing recommendations on density, positioning, embedment and lengths of ties.
Building Regulations 2000 Approved. Document E: Resistance to the Passage of sound. Provides procedures for sound insulation testing and the measurement of dynamic stiffness of wall ties.
DD140: Part 2: 1987 Recommendation for the Design of Wall Ties. Provides recommendations for the design of wall ties for use in masonry and timber construction in the UK. Allows for the design
of new wall ties which are then performance tested to determine classification in accordance with end use. Classification type 1 to type 4 cover masonry construction. Ties must meet minimum
characteristic tensile and compressive force requirements noted in DD140
Building Regulations Approved Documents: 1995 BRE Digest 329: Installing wall ties in existing construction recommendations on density, positioning, embedment and lengths of ties.
1.0
2.0
WT1
WTS3P
Lengths (mm)
200, 225, 250, 300
Lengths (mm)
150, 175, 200, 225, 250,
275, 300
1.0
3.0
2.0
3.0
4.0
WTS1S
WTS4S
Lengths (mm)
200, 225, 250, 275, 300
Longer Lengths to customers
requirements
Lengths (mm)
175, 200, 225, 250,
275, 300
4.0
5.0
6.0
WTS2S
WTS4H
Lengths (mm)
175, 200, 225, 250,
275, 300
Lengths (mm)
175, 200, 225, 250,
275, 300
5.0
6.0
7.0
8.0
WTS2SHD
WTS4P
Lengths (mm)
175, 200, 225, 250,
275, 300
7.0
8.0
9.0
10.0
WTS3S
WT2PT
Lengths (mm)
150, 175, 200, 225, 250,
275, 300
10.0
9.0
11.0
12.0
WT2
WTDT
Lengths (mm)
200, 225
Lengths (mm)
150, 200, 225, 250, 300
12.0
11.0
13.0
14.0
WT4
WTBT
Lengths (mm)
200, 225
Lengths (mm)
150, 200, 225, 250, 300
14.0
13.0
email:sales@wincro.com
www.wincro.com
15.0
17.0
19.0
15.0
16.0
WTS2U
WTS1C23
Projections (mm)
75*, 100*, 125, 150, 175, 200, 225
17.0
18.0
WTS2E
WTS2C23
Projections (mm)
75*, 100*, 125, 150, 175, 200, 225
20.0
WTS2X
WTS3C23
Projections (mm)
100*, 125, 150, 175, 200, 225
20.0
21.0
22.0
WTP3U
WTS4C23
Projections (mm)
100, 125, 150, 175, 200, 225
22.0
23.0
24.0
WTW2U
WTS2C27 / WTS2C28
Projections (mm)
100, 125, 150, 200
24.0
23.0
27.0
18.0
19.0
21.0
25.0
16.0
25.0
26.0
WTW2H
WTS2C38
Lengths (mm)
150, 175, 200
(please state direction of wire end)
26.0
27.0
28.0
WTTFT
WTUC
28.0
29.0
29.0
30.0
WIC
WDS
30.0
CENTRAL SECTION
INNER SECTION
Specify: 2 Indent
Specify: 3 Plain
Specify: T T-Bar
50mm
50mm
50mm
Example specification:
WT (Outer, Central, Inner) / Length
ie: WTS2C23/150
Projection
C23
Specify: H 3 Holes
2
S
email:sales@wincro.com
www.wincro.com
Fixed at 450mm
vertical centres
4
5
6
7
8
7
8
9
10
11
225
225
1.0
1.1
9
225
11
4
10
450mm
vertical
centres
450 to
900mm
centres
1.2
7
900mm horizontal centres
1.3
2.0
WTP3U
3.0
3.0
4.0
5.0
10
WINCRO FRAME CRAMPS > CRAMP FIXING APPLICATIONS FOR FIXING TO CONCRETE AND STEELWORK
1.0
Product
reference
Cramp
projection (mm)
Cavity
width (mm)
WTS2U/100
100
25-50
WTS2U/125
125
50-75
WTS2U/150
150
76-100
WTS2U/175
175
101-125
WTS2U/200
200
126-150
WTS2U/225
225
151-175
WTW2U
50mm
90mm
WTS2U
1.0 / 1.1
1.0 Fixed to concrete using a WBEB
Expansion Bolt
1 WTS2U
2 WTW2U Flexible End Frame Cramp
3 WBEB Expansion Bolt
1
3
min, 50mm
1 WTS2U
2 WBSD Self-Drilling, Self-Tapping Screw
3 WIP Isolation Patch
90mm
Projection
1.0
1.1
2.0 / 2.1
Fixed to steelwork using a WBSD
Self-Drilling Self-Tapping Screw
1
2
3
4
1
3
3
2
2.0
email:sales@wincro.com
2.1
www.wincro.com
11
2.0
Length
(mm)
Width
(mm)
Boxed
in
152
73
50
205
73
50
73mm
2mm thick
152mm/205mm
1.0
WT2 / WTUC
450 mm
vertical
centres
1.0
2.0
2
6
1
vertical centres
4 WTS4H Tie
5 WTP3U (with WDS
De-bonding Sleeve)
6 WIP Isolation Patch
6
2.0
12
1.0
WT28FT / WTS2C28
1 WT28FT Fastrack Restraint
2 WTS2C28 Channel Tie
1.0
2.1
Wincro Fastrack Ties
1 WTS2C28
2 WTDP2C28
2.1
3.0 / 3.1
Wincro Fastrack Channel
3.0
WINCRO TWO PART TIE: Ties long enough to span a cavity greater than 150mm would over balance when laid on
the inner leaf.The Wincro two part tie is manufactured with either a 175mm or 225mm inner part and is positioned in the
inner leaf. The outer part of the tie is positioned when the outer leaf is built. Its length is dependent on the cavity width.
Technical information is available from our Technical Design Team.
4.0 /4.1
WT2PT Two Part Tie
4.0
1 WT2PT
2 WIC
4.1
email:sales@wincro.com
www.wincro.com
14
1.0
Wincro Channel & Ties Fixed to Steelwork
1
2
3
4
5
WC28P Channel
WIP Isolation Patch
WBXS Xylan Coated Setscrew
WTS2C28 Tie
WT4 Wall Tie
1
3
5
4
Fixed at 450mm
vertical centres
900m
1.0
max
ntres
m ce
2.0
450mm
100mm
4
3
2
2.0
at 450mm
vertical spacing
Ties at 450mm
vertical spacing
WINCRO CHANNEL: A Selection of Wincro Channel Ties. For further information see pages 6-8.
3.0
WTS3C23
3.0
3.1
WTS1C23
3.1
3.2 WTS4C23
3.2
3.3 WTS2C23
3.3
3.4 WTS2C28
3.4
3.5 WTDP4C23
3.5
Wincro Channel Ties for WC23 Channel
3.6
email:sales@wincro.com
www.wincro.com
15
1.0 / 1.1
WT75HR Head Restraint
1
2
1.1
1.0
2.0 / 2.1
WT75HRC
1
2
2.0
2.1
200mm
75mm
50mm
3.1
2
3.0
3.2
140mm
16
1.0
1.1
1.2
2.0
2.1
2.2
1.3
2.3
1.0
1.1
1.2
2.0
2.1
2.2
2
2
3
1
1
1.3
2.3
email:sales@wincro.com
www.wincro.com
17
3.0
One Way Tie
One way ties are measured from the stem centre and are available
as a standard 100mm, 125mm, 150mm and 200mm projection
(other projections made to order)
3.0
3.0
3.1
Two Way Tie
Two way ties are measured overall and are available as a standard
200mm, 225mm and 250mm length (other lengths made to order)
3.1
3.1
4.1
4.1
4.2
4.2
4.3
4.3
5.0
1
2
3
4
5
3
5
4
1
5.0
18
1.0 / 1.1
1
2
1.0
1.1
2.0 / 2.1
1
2
3
WTDP3U
WBEB Expansion Bolt
WTDP4C28 for fixing
to WC28 Channel
2.0
2.1
3.0 / 3.1
1
2
3
4
5
WTDP3U
WBPS Nylon Plug and Screw
WBEB Expansion Bolt
WTB2E
WTDL3U
3
5
2
3.0
3.1
3
4.0 / 4.1
1
2
3
4
WTB2E
WBEB Expansion Bolt
WTDP3A for fixing
to WCD Dovetail Channel
WTDP1C23 for fixing
to WC23 Channel
4.0
4.1
email:sales@wincro.com
www.wincro.com
19
1.0
2.0
1
2
3
4
5
6
7
8
9
10
WTDP3DP
WSCC3
WBEB Expansion Bolt
WSCC7
WC38 Cast-in Channel
WBT38 T Head Bolt
WSCC4
WSCC2
WIP Isolation Patch
WBXS Xylan Coated Setscrew
(removed for clarity)
2.1
2.0 WSCC2
2.2
2.1 WSCC2
6
2.2 WSCC3
2.3
2.3 WSCC4
Angle with vertical slot and serrated patch
2.4 WSCC5
Angle with two horizontal slots and one welded
dowel pin
2.4
2.5 WSCC6
Angle with horizontal slot and welded dowel pin
2.6 WSCC7
Angle with two vertical slots, two serrated patches
and two welded dowel pins
2.5
10
1.0
2.6
20
1.0
MASONRY REINFORCEMENT
WMR35
Product
reference
Product
width (mm)
Wall
width (mm)
WMR35/60
60
100
WMR35/100
100
140
WMR35/150
150
190
WMR35/160
160
200
WMR35/175
175
215
2.0
3150mm
450mm centres
Specification WMR35
has a total cross
sectional area of
20.12mm2
2.5mm diameter
cross wires
2 x 3.58 flattened
main wires
MASONRY REINFORCEMENT
WMRT35/4
Product
reference
Product
width (mm)
Wall
width (mm)
WMRT35/4/60
60
100
WMRT35/4/100
100
140
WMRT35/4/150
150
190
WMRT35/4/160
160
200
WMRT35/4/175
175
215
3150mm
450mm centres
Specification WMRT35
has a total cross
sectional area of
40.24mm2
4 x 3.58 flattened
main wires
2.5mm diameter
cross wires
Important note: Specifiers now use various wire diameters, if possible please check specification. Note: BS5628 Part 2 recommends that
stainless steel material should be used on an external wall, including the inner leaf of a cavity.
3.0
MASONRY REINFORCEMENT
WMR40
Product
reference
Product
width (mm)
Wall
width (mm)
WMR40/60
60
100
WMR40/100
100
140
WMR40/150
150
190
WMR40/160
160
200
WMR40/175
175
215
3150mm
450mm centres
Specification WMR40
has a total cross
sectional area of
25.12mm2
2.5mm diameter
cross wires
2 x 4.0 flattened
main wires
email:sales@wincro.com
www.wincro.com
21
4.0
MASONRY REINFORCEMENT
WMRT40/4
Product
reference
Product
width (mm)
Wall
width (mm)
WMRT40/4/60
60
100
WMRT40/4/100
100
140
WMRT40/4/150
150
190
WMRT40/4/160
160
200
WMRT40/4/175
175
215
5.0
Product
width (mm)
Wall
width (mm)
WMR45/60
60
100
WMR45/100
100
140
WMR45/150
150
190
WMR45/160
160
200
WMR45/175
175
215
Product
reference
Specification WMRT40/4
has a total cross
sectional area of
50.24mm2
2.5mm diameter
cross wires
4 x 4.0 flattened
main wires
MASONRY REINFORCEMENT
WMR45
Product
reference
6.0
3150mm
450mm centres
3150mm
450mm centres
Specification WMR45
has a total cross
sectional area of
31.82mm2
2.5mm diameter
cross wires
2 x 4.5 flattened
main wires
MASONRY REINFORCEMENT
WMR50
Product
width (mm)
Wall
width (mm)
WMR50/60
60
100
WMR50/100
100
140
WMR50/150
150
190
WMR50/160
160
200
WMR50/175
175
215
3150mm
450mm centres
Specification WMR50
has a total cross
sectional area of
39.28mm2
2.5mm diameter
cross wires
7.0
WMRCT Reinforcement
The WMRCT is a single span system
with a welded flat tie for use in a single leaf wall.
Longitudinal wires are 4mm dia. Flat ties are
manufactured 20mm wide x 2.5mm thick.
7.0
2 x 5.0 flattened
main wires
22
1.0 / 1.1
WMRD Reinforcement
The WMRD masonry reinforcement is a double span
system for use in cavity walls. Longitudinal wires are
4mm dia with 2.5mm dia cross wires at 450mm centres.
Standard lengths are 3150mm but lengths can be
produced to suit any situation.
Typical Example
Brick 100mm, Cavity 75mm, Block 100mm would require
WMRD 235 double span.
Specify
WMRD40/235/S for stainless steel,
WMRD40/235/G for galvanised.
1.0
1.1
WMRDCT REINFORCEMENT
2.0 / 2.1
WMRDCT Reinforcement
2
Typical example
Brick 100mm, Cavity 75mm, Block 100mm would require
WMRDCT 235 double span.
Specify
WMRDCT/235/S for stainless steel,
WMRDCT/235/G for galvanised.
2.0
2.1
3.0
3.0
WMRM
REINFORCEMENT MESH
Product
reference
Material Mesh
thickness width
(mm)
(mm)
Coil
length
(m)
Brick/
block
WMRM65
0.3
65
20
105-75
WMRM115
0.3
115
20
150
WMRM175
0.3
175
20
215
WMRM225
0.3
225
20
330-300
3.0
email:sales@wincro.com
www.wincro.com
23
1.0
WTUWS Wincro Universal Wall Starter
225mm centres
225mm centres
1.0
2.0
Wincro Alternative using WC36 Surface
Fixed Channel and WTS3C36 Wall Ties
2
1
WC36
WTS3C36 Wall Ties at 225mm Vertical Centres
2.0
24
1.0
WTRWT Wavy Tail Tie
For use where new/replacement brickwork is
built off existing masonry. Wavy end is resin
fixed back to inner leaf.
Lengths (mm)
175, 200, 225 other sizes manufactured
to order.
Standard embedment 85mm.
Required hole 10mm diameter.
Also available, Cranked Wavy Tail Tie
where tie is cranked by 25mm.
Specify WTRWC/length
1.0
2.0
WTRCC Double Wavy Tail Tie
For use where mechanical ties are not viable.
Resin grouted into both leaves.
Lengths (mm)
175, 200, 225 other sizes manufactured
to order.
Standard embedment 75mm.
Required hole 10mm diameter.
Also available, Ribbed Bar Tie 8mm
diameter, lengths manufactured to
order. Specify WTRRB/length
2.0
3.0
Remedial Tie Accessories
Wincro Resin-Fix Accessories for remedial
tie installation
WBRC / 380
Resin Cartridge
380ml & nozzle
WBTLAG / 380 Hand Applicator Gun to suit
WBTLRNZ
Nozzles
WBTLBP
Blow Out Pump
WBTLRET
Extension Delivery Tube
(10 off 290mm)
Wincro Remedial Tool Accessories for remedial
tie installation
WBTLTS
WBTLHS
WBTLWS
WBTLAD
WBTLTWF
WBTLTWP
3.0
3.1
*figures depend
Hole Diameter
Hole Depth
10mm
75mm
120
12mm
75mm
80
14mm
100mm
45
email:sales@wincro.com
www.wincro.com
25
4.0
WTRBB Brick to Brick Tie
4.0
Application Method
1. Drill 12mm diameter hole in brickwork within a 10 tolerance, setting depth gauge
on drilling machine to give between 55/65mm hole depth in inner leaf.
2. Set Inner Blow out hole, screw threaded setting tool (WBTLTS) on to M6 thread
on tie and insert the tie to full depth of hole in inner leaf. Tighten inner expander
with pre-set torque wrench (WBTLTWF). Remove setting tool.
3. Set Outer Fix hex setting tool (WBTLHS) on to torque wrench (WBTLTWF) and set
outer expander by tightening nut until pre-set torque is reached. Seal outer brick with
colour matching mortar.
Technical Information Specification:
Material A2, 300 series, Austenitic Stainless Steel. Expanders 12mm diameter
Thread diameter of Rod M6. Note: A4 can be manufactured to order.
Accessories needed: WBTLTS Threaded Setting Tool, WBTLHS Hexagon Setting Tool,
WBTLTWF Fixed Head Torque Wrench. Torque Setting: 6.8 Nm (5lb.ft).
Note: Drill bits conform to DIN 8035.
4.1
Product
Code
WTRBB
BRICK TO BRICK TIE
Tie Length
mm
Cavity Width
mm
WTRBB200
200
45/70
WTRBB225
225
70/95
WTRBB255
255
100/120
5.0
WTRTQ Torque Tie
5.0
Application Method
1. Drill 12mm diameter hole in brickwork within a 10 tolerance, setting depth gauge
on drilling machine to give between 55/65mm hole depth in inner leaf.
2. Set Inner - Blow out hole, insert the tie to full depth of hole in inner leaf. Fit hex
setting tool (WBTLHS) on to torque wrench (WBTLTWF). Tighten inner expander
with pre-set torque nut. After shearing off the torque nut continue turning the setting
tool (WBTLTS) until wrench indicates you have reached the pre-determined torque
for outer leaf. Remove setting tool.
Technical Information Specification:
Material A2, 300 series, Austenitic Stainless Steel. Expanders 12mm diameter
Thread diameter of Rod M6. Note: A4 can be manufactured to order.
Accessories needed: WBTLHS Hexagon Setting Tool, WBTLTWF Fixed Head Torque
Wrench. Torque Setting: 6.8 Nm (5lb. ft). Note: Drill bits conform to DIN 8035.
5.1
Product
Code
Cavity Width
mm
WTRTQ200
200
45/70
WTRTQ225
225
70/95
6.0
WTRPE PVC Expander Tie
6.0
Application Method
1.Drill 12mm diameter hole in brickwork within a 10 tolerance, setting depth gauge
on drilling machine to give between 55/65mm hole depth in inner leaf.
2.Set Inner Blow out hole, screw threaded setting tool (WBTLTS) on to M6 threaded
on tie and insert the tie to full depth of hole in inner leaf. Tighten inner expander with
pre-set torque wrench. Remove setting tool.
3. Set Outer Fit hex setting tool (WBTLHS) on to torque wrench and set outer expander
by tightening nut until pre-set torque is reached. Seal outer brick
with colour matching mortar.
Technical Information Specification:
Material A2, 300 series, Austenitic Stainless Steel. Expanders 12mm diameter PVC to
BS2848. The PVC is impervious to mould growth drying or shrinking and resists chemical
attach. Thread diameter of Rod M6. Accessories needed. WBTLTS Threaded Setting
Tool, WBTLHS Hexagon Setting Tool, WBTLTWF Fixed Head Torque Wrench. Torque
Setting: 6.8 Nm (5lb. ft). Note: Drill bits conform to DIN 8035.
6.1
Product
Code
WTRPE
PVC EXPANDER TIE
Tie Length
mm
Cavity Width
mm
WTRPE200
200
45/70
WTRPE225
225
70/95
WTRPE255
255
100/120
fax:
www.wincro.com
Trademarks:
is the registered
Trade Mark of Wincro Metal Industries Limited.
Copyright: This publication and all its
contents are the Copyright Wincro Metal
Industries Limited 2004. No part of this
publication may be reproduced in any form
without the prior consent in writing of Wincro
Metal Industries Limited.
Trade Description Act: Wincro Metal Industries
Limited is continually developing and improving
its products and the descriptions contained in
this publication are for general guidance only,
they do not form part of any contract.
To the best of our knowledge, the information
contained in this document is accurate.
Wincro Metal Industries Limited accepts no
responsibility for errors in, or misinterpretation
of the information in this document, or in its use.
BSSA
email:
sales@wincro.com