Академический Документы
Профессиональный Документы
Культура Документы
ENGINE POWER: 97 kW
E
H
NLC
LC
3370 (11-1)
3370 (11-1)
G Counterweight clearance
1072 (3-6)
4170 (13-8)
4170 (13-8)
2338 (7-8)
C Track gauge
1990 (6-6)
2200 (7-2)
Width of superstructure
2740 (8-11)
2490 (8-2)
2987 (9-10)
2590 (8-6)
2800 (9-2)
3014 (9-10)
2690 (8-10)
2900 (9-6)
Ground clearance
3000 (9-10)
M Track height
Dipper lengths
8366 (27-5)
8326 (27-4)
8415 (27-7)
3014 (9-10)
3014 (9-10)
3014 (9-10)
486 (1-7)
885 (2-11)
F
K
M
L
NLC
LC
3370 (11-1)
3370 (11-1)
G Counterweight clearance
1072 (3-6)
4170 (13-8)
4170 (13-8)
2338 (7-8)
C Track gauge
1990 (6-6)
2200 (7-2)
Width of superstructure
2740 (8-11)
2490 (8-2)
2987 (9-10)
2590 (8-6)
2800 (9-2)
3014 (9-10)
2690 (8-10)
2900 (9-6)
Ground clearance
3000 (9-10)
M Track height
Dipper lengths
8652 (28-5)
8674 (28-5)
8644 (28-4)
2876 (9-5)
2760 (9-1)
2823 (9-3)
486 (1-7)
885 (2-11)
SWING SYSTEM
Swing motor
Swing brake
Final drive
Swing speed
Swing gear
Swing lock
UNDERCARRIAGE
Carriage options
Construction
Recovery point
Track type
Track shoe options
Upper & lower rollers
Track adjustment
Track idler
No. of track guides
No. of lower rollers
No. of upper rollers
No. of track shoes
HYDRAULIC SYSTEM
A variable flow load sensing system with flow on demand, variable power output and servo operated, multi-function open centre
control. Machine auto warm up standard maximises performance in cold conditions.
Pumps
Main pumps
Maximum flow
Servo pump
Maximum flow
Control valve
A combined ten spool control valve with auxiliary service spool as standard. When required twin pump flow is combined to boom,
dipper and bucket services for greater speed and efficiency.
Relief valve settings
Boom/Arm/Bucket
314 bar (4610lbf/sq.in)
With power boost
343 bar (4975lbf/sq.in)
Swing circuit
279 bar (4045lbf/sq.in)
Travel circuit
343 bar (4975lbf/sq.in)
Pilot control
40 bar (569lbf/sq.in)
A separate Cushion Control valve in the servo system provides cushioning of the boom and dipper spools selection and quick
warm-up of the servo system.
Hydraulic cylinders
Double acting type, with bolt-up end caps and hardened steel bearing bushes. End cushioning is fitted as standard on boom, dipper
and bucket rams.
Optional hose burst check valves available for boom and dipper rams.
Filtration
The hydraulic components are protected by the highest standard of filtration to ensure long hydraulic fluid and component life.
In tank
150 micron, suction strainer.
Main return line
10 micron, fibreform element.
Plexus Bypass line
1.5 micron, paper element.
Pilot line
10 micron, paper element.
Hydraulic hammer return
10 micron, reinforced microform element.
Cooling
Worldwide cooling is provided as part of a single face cooling pack, in conjunction with the engine water cooler.
TRACK DRIVE
Type
Travel motors
Final drive
Service brake
Park brake
Gradeability
Travel speed
Tractive effort
Fully hydrostatic, three speed with autoshift between high and medium speed.
Variable swash axial piston type, fully guarded within undercarriage frame.
Planetary reduction, bolt-on sprockets.
Hydraulic counter balance valve to prevent overspeeding on gradients.
Disc type, spring applied, automatic hydraulic release.
70% (35 deg) continuous.
High 5.2 kmh (3.2 mph).
Mid 3.3 kmh (2.1 mph).
Low 1.8 kmh (1.1 mph).
153 kN (15602 kgf, 34396 lbf).
CAB
Excellent digging, loading and positioning visibility results from the careful design of front, side and roof lights. All screens are tinted
to improve in cab conditions.
Fully opening front screen is very smooth to operate and as the lower screen is stored within the top screen frame it makes
complete front screen opening easy, fast and convenient.
Fresh air ventilation available from opening door window, opening slot in front screen and fully opening front screen.
Parallelogram wash wiper for upper screen ensuring good wiped area for maximum visibility. Wiper motor is fitted in the left hand
side of the roof screen so as not to affect bucket visibility when loading. Optional lower screen wiper available.
Fresh air ventilation and heater with windscreen demister. Infinitely variable blower speed, temperature and recirculation control.
Optional climate control. Fully adjustable deluxe suspension seat with arm rest adjustment and backrest recline. Optional radio with
digital tuner fitted into the roof lining for maximum protection. Conveniently placed radio mute button incorporated into lower
console. 12v power point and mobile phone holder built into the right hand console. Courtesy light can be operated from ground
level and is illuminated for five minutes or until switched off improving operator access at night. Cab mounted roller blind protects
operator from suns glare through front or top screens.
CONTROLS
Excavator
Tracks
Auxiliary
Control isolation
Engine speed
Engine stop
Horn
All servo lever operated to ISO control pattern, independently adjustable to the seat.
Individually servo operated by foot pedal or hand lever.
Speed selection via joystick button.
Via servo operated foot pedal.
Via gate lock lever at cab entrance or panel switch.
Dial type throttle control plus servo lever mounted one-touch idle control or separate selectable
auto-idle with adjustable time delay using AMS.
Ignition key operated and seperate shut-down button.
Operated via servo lever mounted button.
Litres
UK Gal
Fuel tank
220
48.5
Engine coolant
19.7
4.4
Engine oil
20.4
4.5
1.3
4.4
0.97
Hydraulic system
142.0
31.2
Hydraulic tank
73.0
16.1
Operating Weight
Bearing Pressure
500mm (20in.)
18296kg (40324lb)
JS180LC Mono Machine equipped with 5.15m Monoboom, 3.05m Dipper, 0.9m3 Bucket, operator and full fuel tank.
Shoe Width
Operating Weight
Bearing Pressure
600mm (24in.)
18857kg (41561lb)
700mm (28in.)
19110kg (42118lb)
800mm (32in.)
19398kg (42753lb)
JS180NLC T.A.B. Machine equipped with 5.35m T.A.B. boom, 3.05m Dipper, 0.9m3 Bucket, operator and full fuel tank.
Shoe Width
Operating Weight
Bearing Pressure
500mm (20in.)
19060kg (42008lb)
JS180LC T.A.B. Machine equipped with 5.35m T.A.B. boom, 3.05m Dipper, 0.9m3 Bucket, operator and full fuel tank.
Shoe Width
Operating Weight
Bearing Pressure
600mm (24in.)
19621kg (43245lb)
700mm (28in.)
19874kg (43802lb)
800mm (32in.)
20162kg (44437lb)
All buckets are JCB Esco type fully welded steel, with sealed, hardened steel pivot pins and replaceable wear parts.
Capacity (SAE heaped)
Weight
600mm (24in.)
Max Width
0.35cu.m (0.46cu.yd)
396kg (873lb)
750mm (30in.)
0.49cu.m (0.64cu.yd)
448kg (988lb)
900mm (36in.)
0.62cu.m (0.81cu.yd)
489kg (1078lb)
1000mm (40in.)
0.72cu.m (0.94cu.yd)
526kg (1160lb)
1200mm (48in.)
0.90cu.m (1.18cu.yd)
592kg (1305lb)
mm (ft-in)
8514 (27-11)
mm (ft-in)
8368 (27-5)
mm (ft-in)
5799 (19-0)
mm (ft-in)
9398 (30-9)
mm (ft-in)
7048 (23-1)
mm (ft-in)
5229 (17-2)
mm (ft-in)
3000 (9-10)
Bucket rotation
A
B
G
10
9
8
182
kgf (lbf)
8754 (19259)
kgf (lbf)
11839 (26104)
7
6
Dipper length:
mm (ft-in)
8908 (29-3)
mm (ft-in)
8769 (28-9)
mm (ft-in)
6252 (20-6)
mm (ft-in)
9663 (31-8)
mm (ft-in)
7321 (24-0)
mm (ft-in)
5682 (18-8)
mm (ft-in)
3000 (9-10)
kgf (lbf)
7619 (16764)
kgf (lbf)
11839 (26104)
3
2
1
0
mm (ft-in)
9223 (30-7)
mm (ft-in)
9088 (29-10)
mm (ft-in)
6598 (21-8)
mm (ft-in)
9888 (32-5)
mm (ft-in)
7543 (24-8)
mm (ft-in)
6028 (19-9)
mm (ft-in)
3000 (9-10)
4
E
182
Dipper length:
Maximum digging reach (on ground)
Metres
Bucket rotation
182
kgf (lbf)
7003 (15439)
kgf (lbf)
11839 (26104)
10
Metres
mm (ft-in)
8831 (29-0)
mm (ft-in)
8652 (28-5)
mm (ft-in)
5354 (17-7)
mm (ft-in)
10248 (33-7)
mm (ft-in)
8000 (26-3)
mm (ft-in)
4232 (13-10)
mm (ft-in)
2170 (7-1)
kgf (lbf)
8754 (19259)
kgf (lbf)
11839 (26104)
Dipper length:
G
12
11
10
9
8
7
mm (ft-in)
9260 (30-5)
mm (ft-in)
9094 (2-10)
mm (ft-in)
5786 (18-11)
mm (ft-in)
10674 (35-0)
mm (ft-in)
8444 (27-8)
mm (ft-in)
4699 (15-5)
mm (ft-in)
2227 (7-3)
182
Bucket rotation
4
3
2
182
kgf (lbf)
7619 (16764)
kgf (lbf)
11839 (26104)
1
0
mm (ft-in)
9592 (31-6)
mm (ft-in)
9463 (31-1)
mm (ft-in)
6108 (20-0)
mm (ft-in)
10822 (35-6)
mm (ft-in)
8672 (28-5)
mm (ft-in)
5211 (17-1)
mm (ft-in)
2587 (8-6)
Mtres
Dipper length:
182
kgf (lbf)
7003 (15439)
kgf (lbf)
11839 (26104)
12
11
10
Mtres
kg
3m (9ft 10in)
kg
6090*
6090*
kg
kg
5370*
10850*
10740*
5370*
10150
10320
6m (19ft 8in)
JS180 LC MONO
kg
4040*
kg
4040*
kg
kg
5560*
6930*
8220*
8840*
8690*
7590*
5560*
5920
5610
5450
5420
5500
5010*
5550*
5900
5800
5780
4050
3920
3780
3690
3670
kg
kg
kg
3860*
3330*
3190*
3230*
3440*
3870*
4740*
5830*
LIFT CAPACITIES Dipper Length: 2.70m, 5.15m Monoboom, Trackshoes: 700mm, No bucket.
Reach
kg
3m (9ft 10in)
kg
5830*
9880*
5830*
9880*
kg
kg
9720*
5040*
6450*
10170*
11560*
8370*
9720*
5040*
6450*
10040
10180
8370*
6m (19ft 8in)
kg
kg
kg
kg
kg
kg
5000*
6400*
7830*
8670*
8770*
8020*
5000*
5990
5650
5440
5370
5420
3880*
4620*
5220*
5900*
5780
5730
5360*
3880*
4080
3940
3790
3670
3630
3680
3220*
4000*
3100*
2820
2760
2720
kg
4960*
8470*
3m (9ft 10in)
kg
4960*
8470*
Notes:
kg
8600*
6010*
6180*
9110*
11930*
9250*
kg
8600*
6010*
6180*
9110*
9950
9250*
kg
5910*
7410*
8410*
8680*
8160*
6250*
6m (19ft 8in)
kg
kg
2800*
2490*
2400*
2450*
2600*
2920*
3520*
4880*
5580*
5910*
5600
5360
5260
5280
5460
kg
3890*
4270*
4900*
5620*
5710
5640
5670
3890*
4060
3910
3730
3600
3530
3560
1. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lift Capacity Standards.
2. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.
3. Rated loads marked with an asterisk(*) are limited by hydraulic capacity rather than tipping load.
kg
2800*
2490*
2400*
2450*
2600*
2710
2980
3660
5580*
mm
5165
6471
7241
7641
7731
7521
6985
6033
4396
JS180 LC MONO
kg
mm
4537
5985
6811
7235
7330
7108
6537
5507
JS180 LC MONO
LIFT CAPACITIES Dipper Length: 3.05m, 5.15m Monoboom, Trackshoes: 700mm, No bucket.
Reach
kg
3860*
3330*
3190*
2970
2860
2950
3290
4200
kg
kg
2730*
3940*
4200
4130
2730*
2780
2710
2640
kg
2430*
2160*
2070*
2080*
2180*
2390*
2800*
3630*
5160*
kg
2430*
2160*
2070*
2080*
2180*
2390*
2670
3200
4660
mm
5738
6935
7657
8037
8122
7923
7416
6528
5059
kg
3m (9ft 10in)
kg
6090*
6090*
kg
kg
5370*
10850*
10740*
5370*
8680
8840
6m (19ft 8in)
kg
4040*
kg
4040*
kg
kg
5560*
6930*
8220*
8630
8590
7590*
5520
5200
4910
4750
4720
4800
5010*
5550*
5660
5560
5530
3580
3460
3330
3240
3220
kg
kg
kg
3860*
3330*
3190*
3230*
3440*
3870*
4740*
5830*
LIFT CAPACITIES Dipper Length: 2.70m, 5.15m Monoboom, Trackshoes: 500mm, No bucket.
Reach
kg
3m (9ft 10in)
kg
5830*
9880*
5830*
9880*
kg
kg
9720*
5040*
6450*
10170*
11560*
8370*
9640*
5040*
6450*
8580
8700
8370*
6m (19ft 8in)
kg
kg
kg
kg
kg
kg
5000*
6400*
7830*
8630
8540
8020*
5000*
5270
4940
4740
4670
4720
3880*
4620*
5220*
5670
5540
5490
5360*
3680
3620
3480
3330
3220
3170
3230
3220*
4000*
3100*
2490
2430
2380
kg
4960*
8470*
3m (9ft 10in)
kg
4960*
8470*
Notes:
kg
8600*
6010*
6180*
9110*
11930*
9250*
kg
8600*
6010*
6180*
8370
8480
8760
kg
5910*
7410*
8410*
8420
8160*
6250*
6m (19ft 8in)
kg
kg
2800*
2490*
2400*
2450*
2600*
2920*
3520*
4880*
5580*
5270
4900
4660
4560
4580
4750
kg
3890*
4270*
4900*
5620*
5470
5390
5420
3680
3600
3450
3270
3140
3080
3100
1. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lift Capacity Standards.
2. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.
3. Rated loads marked with an asterisk(*) are limited by hydraulic capacity rather than tipping load.
kg
2800*
2490*
2400*
2410
2320
2370
2610
3200
5100
mm
5165
6471
7241
7641
7731
7521
6985
6033
4396
kg
mm
4537
5985
6811
7235
7330
7108
6537
5507
LIFT CAPACITIES Dipper Length: 3.05m, 5.15m Monoboom, Trackshoes: 500mm, No bucket.
Reach
kg
3860*
3330*
2930
2620
2520
2590
2890
3690
kg
kg
2730*
3940*
4020
3950
2500
2450
2370
2310
kg
2430*
2160*
2070*
2080*
2180*
2390*
2800*
3630*
5160*
kg
2430*
2160*
2070*
2080*
2100
2140
2330
2800
4080
mm
5738
6935
7657
8037
8122
7923
7416
6528
5059
3m (9ft 10in)
6m (19ft 8in)
kg
kg
kg
kg
kg
kg
kg
kg
5900*
5030*
8900*
5900*
5030*
8900*
5800*
5830*
7240*
8340*
8680
8130*
6730*
5800*
5830*
6160
5750
5410
5260
5250
5250*
6040*
6000
5830
5720
5010*
4030
3970
3810
3650
3560
3550
3920*
5210
2730
2680
7710*
7710*
JS180 LC T.A.B.
kg
7030*
4130*
3490*
3250*
3200*
3280*
3540*
3550*
kg
7030*
4130*
3490*
2980
2690
2600
2690
3000
LIFT CAPACITIES Dipper Length: 2.70m, 5.35m T.A.B., Trackshoes: 700mm, No bucket.
Reach
3m (9ft 10in)
kg
5400*
kg
5400*
5420*
5240*
7520*
7520*
6m (19ft 8in)
JS180 LC T.A.B.
kg
kg
kg
kg
4780*
4660*
5540*
8040*
8620*
8360*
7230*
5150*
4780*
4660*
5540*
5840
5450
5240
5190
5150*
4600*
5340*
6040
5840
5700
5390*
3530*
4110
4010
3840
3660
3540
3500
3530*
kg
kg
3190*
2480
4200
4140
2790
2740
2670
2620
kg
4200*
2980*
2590*
2440*
2410*
2480*
2670*
3050*
3190*
kg
4220*
2980*
2590*
2440*
2410*
2390
2460
2700
3190*
LIFT CAPACITIES Dipper Length: 3.05m, 5.35m T.A.B., Trackshoes: 700mm, No bucket.
Reach
3m (9ft 10in)
kg
5080*
kg
5080*
3440*
3440*
6580*
6990*
6580*
6990*
Notes:
1.
2.
3.
4.
6m (19ft 8in)
kg
kg
kg
4180*
3830*
4260*
7710*
8430*
8370*
7440*
5610*
4180*
3830*
4260*
5850
5410
5150
5070
5130
3440*
4120*
4520*
5900*
5790
5620
5530*
4030*
3440*
4120
4000
3810
3610
3460
3400
3440
The above loads are in compliance with SAE and ISO Hydraulic Excavator Lift Capacity Standards.
They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.
Rated loads marked with an asterisk(*) are limited by hydraulic capacity rather than tipping load.
Lift capacities above are calculated with articulated boom at full reach.
mm
3157
5682
6889
7616
7997
8083
7883
7373
6210
JS180 LC T.A.B.
kg
mm
2326
5047
6377
7157
7562
7653
7441
6898
kg
kg
3820*
4240
4150
4070
3810*
2780
2700
2610
2540
2510
kg
3510*
2600*
2260*
2110*
2070*
2110*
2240*
2490*
2780*
kg
3510*
2600*
2260*
2110*
2070*
2110*
2230
2440
2780*
mm
4324
6208
7327
8014
8377
8459
8268
7784
6815
3m (9ft 10in)
6m (19ft 8in)
kg
kg
kg
kg
kg
kg
kg
kg
5900*
5030*
8900*
5900*
5030*
8900*
5800*
5830*
7240*
8340*
8680
8130*
6730*
5680
5680
5420
5030
4700
4550
4540
5250*
5930
5760
5580
5470
5010*
3560
3500
3340
3190
3100
3090
3920*
4030
2390
2340
7710*
7710*
kg
7030*
4130*
3490*
3250*
3200*
3280*
3540*
3550*
LIFT CAPACITIES Dipper Length: 2.70m, 5.35m T.A.B., Trackshoes: 500mm, No bucket.
Reach
3m (9ft 10in)
kg
5400*
kg
5400*
5420*
5240*
7520*
7520*
6m (19ft 8in)
kg
kg
kg
4780*
4660*
5540*
8040*
8620*
8630*
7230*
5150*
4780*
4660*
5520
5110
4740
4530
4490
4570
4600*
5340*
5790
5590
5460
5390*
3530*
3630
3540
3370
3200
3080
3040
3110
kg
kg
3190*
4100
4020
3960
2450
2400
2330
2280
kg
4220*
2980*
2590*
2440*
2410*
2480*
2670*
3050*
3190*
LIFT CAPACITIES Dipper Length: 3.05m, 5.35m T.A.B., Trackshoes: 500mm, No bucket.
Reach
3m (9ft 10in)
kg
5080*
kg
5080*
3440*
3440*
6580*
6990*
6580*
6990*
Notes:
1.
2.
3.
4.
6m (19ft 8in)
kg
kg
kg
4180*
3830*
4260*
7710*
8430*
8370*
7440*
5610*
4180*
3830*
4260*
5120
4700
4440
4360
4420
3440*
4120*
4520*
5770
5550
5380
5310
4030*
3440*
3640
3530
3340
3140
3000
2940
2980
The above loads are in compliance with SAE and ISO Hydraulic Excavator Lift Capacity Standards.
They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.
Rated loads marked with an asterisk(*) are limited by hydraulic capacity rather than tipping load.
Lift capacities above are calculated with articulated boom at full reach.
kg
4220*
2980*
2590*
2370
2160
2080
2140
5350
2980
mm
3157
5682
6889
7616
7997
8083
7883
7373
6210
kg
mm
2326
5047
6377
7157
7562
7653
7441
6898
kg
kg
7030*
4130*
3180
2610
2350
2270
2340
2610
kg
kg
3820*
4060
3960
3890
3810*
2430
2360
2270
2220
2190
kg
3510*
2600*
2260*
2110*
2070*
2110*
2240*
2490*
2780*
kg
3510*
2600*
2260*
2110*
1950
1880
1930
2110
2560
mm
4324
6208
7327
8014
8377
8459
8268
7784
6815
JCB Sales Limited, Rocester, Staffordshire ST14 5JP. Tel: 01889 590312. Fax: 01889 590588. Web: http://www.jcb.com
JCB reserves the right to change specifications without notice. Illustrations shown may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd.