Rapid hardening bedding and fixing mortar for road maintenance works Product Sika FastFix -138 TP is a one part, prebatched cementitious bedding Description and fixing mortar containing a special blend of cement and carefully selected aggregates. It is available in concrete grey and black colour. After mixing with water the dark colour of the black grade, achieved fits well with road asphalt surfacing. Uses Typical applications includes: Manhole frame bedding/fixing Airport landing light fixing Concrete road repair Telecom box installation Street furniture fixing Road joint repairs Characteristics / Adjustable consistency Advantages Very good application properties Fast setting and hardening for quick opening to traffic (within 2h at +20C) Excellent strength gain at low temperatures Good adhesion to concrete and asphalt Can be extended with additional clean aggregates for large volume bedding work Does not contain chlorides or other corrosion promoting additives Can be used semi dry for bedding and wet for fixing / grouting Tests Approval / Standards SCETAUROUTE Report: Resistance to freeze / thaw according to NF P 18-424. SCETAUROUTE Report: Scaling test according to XP 18-240. Product Data Form Appearance / Colour Powder, dark grey and concrete grey Packaging 25 kg bag Storage Storage Conditions / 6 months from date of production if stored in undamaged and unopened, Shelf-Life original sealed packaging, in dry conditions. Technical Data Chemical Base Cementitious Density ~ 2.28 kg/l (fresh mortar) Granulometry 0 to Dmax: 8 mm
Sika FastFix -138 TP 1/3
D01810001210E Mechanical / Physical Application Method / Sika FastFix-138 TP can be mixed manually or Tools mechanically with concrete mixing equipment. Properties Place Sika FastFix-138 TP with a dry consistency Compressive Strengths Ambient temperature +20C (According to EN 196-1) when used as a bedding for manhole covers or street equipment / furniture etc. Dry consistency (2.5 l / 25 kg) Plastic consistency(3.0 l / 25 kg) Pour in Sika FastFix-138 TP with a plastic consistency 2 hours ~ 20 N/mm2 ~ 14 N/mm2 to the road surface level when using to grout in the 24 hours ~ 30 N/mm2 ~ 30 N/mm2 manhole covers or street furniture etc. 28 days ~ 53 N/mm2 ~ 50 N/mm2 Sika FastFix-138 TP mixed in a dry consistency can be vibrated (if required) to assist the placing and compaction of the material. With the addition of 12.5 kg of 8/20 mm aggregates per bag of Sika FastFix -138TP. (According to EN 196-1) Note: The quantity of water may be varied slightly according to the weather conditions. Hot and dry Dry consistency (2.85 l / 25 kg) Plastic consistency(3.35 l / 25 kg) conditions may require a little bit more water whilst in cold and humid conditions a slight water reduction may 2 hours ~ 30 N/mm2 ~ 25 N/mm2 be necessary. 24 hours ~ 34 N/mm2 ~ 34 N/mm2 28 days ~ 50 N/mm2 ~ 50 N/mm2 Cleaning of Tools Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be mechanically removed. Pull out Strengths On concrete: > 2 N/mm2 (break in concrete) (According to (NF P 18-858) On asphalt surfacing: > 1.5 N/mm2 (break in asphalt) Potlife +5C +20C +30C System 30 minutes 15 minutes 5 minutes Information Application Details Curing Details Consumption / Yield 1 bag yields ~ 12 l of mortar Curing Treatment Protect against evaporation, frost and rain during the hardening of the material. Substrate Quality The substrate must be structurally sound and free of all dirt, loose and friable particles, laitance, oils and grease or other contaminants. Applied Product ready Substrate temperature +5C +20C +30C Substrate Preparation The substrate must be thoroughly predampened but ensure there is no standing water on the surface prior to application. for use Open to traffic ~ 3 hours ~ 2 hours ~ 1 hour
Application Open to traffic times are approximate and will be affected by
Conditions / changing environmental conditions and application details. Limitations Health and Safety For information and advice on the safe handling, storage and disposal Substrate Temperature +5C min. / +35C max. Information of chemical products, users shall refer to the most recemt Material Ambient Temperature +5C min. / +35C max. Safety Data Sheet containing physical, ecological, toxicological and other safety-related data. Application Instructions Mixing Dry consistency: Dark grey: ~ 2.5 l of water to 25 kg powder Concrete grey: ~2.25 l of water to 25 kg powder Plastic consistency: Dark grey: ~ 3 l of water to 25 kg powder Concrete grey: ~2.75 l of water to 25 kg powder